Fcfg3062as Parts

This replacement tube routes water to the ice maker or dispenser so your appliance can fill ice trays and dispense water reliably. It restores a sealed water path to prevent leaks and ensure proper filling. What it does

• Carries water from the supply or valve to the ice maker or dispenser
• Restores proper ice maker fill and water dispensing when a cracked or clogged tube is causing underfilling
• Helps stop leaks by replacing brittle, split, or deteriorated tubing
• Works with the appliance's existing fittings and clamps to maintain a sealed connection

• One replacement water tube

• Turn off the water supply and unplug the appliance before starting work
• Inspect fittings and clamps; reuse if undamaged or replace with equivalent clamps for a secure seal
• Confirm tube routing matches the original to avoid kinking or interference with moving parts

This control panel replaces the damaged or worn front control surface on compatible ranges and wall ovens, restoring access to buttons and the display for normal operation. It provides the finished trim and mounting surface for the oven's controls. What it does:

• Replaces a cracked, scratched, or discolored control/console surface to improve appearance and usability
• Provides the mounting and interface surface for control buttons, touchpads, and display windows
• Helps restore reliable button actuation and clear viewing of the oven/clock display
• Addresses cosmetic and functional issues where the console is damaged or warped

• One control panel as shown

• Installation requires removing the oven/range backguard or front trim—refer to your service manual for safe disassembly
• Power must be disconnected at the breaker before starting; some panels sit near live wiring
• Handle parts carefully to avoid scratching the finish and to align mounting tabs during reassembly
• If the electronic control or keypad is damaged, verify those components separately; this part is the panel/trim only

This hot surface igniter is the heated element that lights the bake burner in gas ovens. It provides a reliable glow to ignite gas so the oven can reach and maintain baking temperatures. What it does

• Heats and glows to ignite the oven's bake burner when the control calls for heat.
• Restores normal oven heating when a failed igniter prevents the burner from lighting.
• Common symptoms: oven won't heat, long preheat times, or bake burner not lighting.
• Works with compatible gas oven systems that use a hot surface ignition method.

• One hot surface igniter assembly (single igniter).

• Turn off power and shut off gas supply before beginning any repair.
• Handle the igniter carefully; the element is brittle and can crack if touched or dropped.
• Verify fit and wiring match your appliance before installation.

This replacement cover protects and finishes the dispenser housing, restoring a clean appearance and helping keep internal dispenser components shielded from spills and debris. It's a direct-fit exterior trim piece for the dispenser area. What it does:

• Covers and protects the dispenser housing and internal components from spills and debris
• Restores a finished appearance to the dispenser area after damage or wear
• Helps the dispenser door/actuator operate without interference from broken trim
• Commonly used when the dispenser trim is cracked, warped, or missing

• One dispenser housing cover

• Disconnect power to the appliance before beginning any work
• Remove dispenser trim screws or clips, note fastener locations for reassembly
• Handle plastic trim carefully to avoid cracking; align tabs and snap or screw cover into place
• Test dispenser functions after reinstalling power; do not force misaligned parts

This hex flange nut secures components where a broader bearing surface is needed to resist loosening and distribute load. It fits 10-32 threaded studs and is used on fastened assemblies in appliances. What it does:

• Provides a secure threaded connection for 10-32 screws and studs
• Flange spreads clamping force to reduce panel or bracket damage
• Hex shape allows tightening with a wrench for a reliable hold
• Commonly replaces worn or missing nuts that cause loose panels or rattling

• One hex flange nut

• Use the correct 10-32 screw or stud and hand-start threads to avoid cross-threading
• Tighten with an appropriately sized wrench; do not overtighten to prevent thread or part damage
• Disconnect power and follow appliance safety instructions before servicing
• Replace only like-for-like; confirm size and thread match your application

This replacement screw secures appliance panels and small components to keep assemblies stable and aligned. Use it when a mounting fastener is missing, stripped, or damaged to restore proper fit and reduce vibration. What it does

• Fastens trim, panels, brackets, or internal components depending on application
• Helps eliminate loose parts, rattling, or misaligned panels
• Restores secure mounting after corrosion, wear, or a lost screw
• Matches OEM fit and thread form for compatible attachment points

• Turn off power to the appliance and unplug before servicing electrical appliances
• Use the correct driver size to avoid stripping the screw head
• Replace only like-for-like fasteners; if screw length or thread engagement is uncertain, confirm with the service manual or parts diagram
• Tighten until secure but avoid over-torquing which can strip threads or damage components

The Bushing is an OEM part for Frigidaire cooktops. This part serves as an interface between the control knob and the appliance, ensuring smooth operation and protecting both the knob and the control panel from wear and tear. The bushing fits snugly around the valve's stem, reducing friction and providing stability as the knob is turned to adjust the heat settings of the cooktop.

Causes of a bad Bushing can include degradation from frequent use, exposure to high heat, or accidental damage during cleaning or use, which can lead to the bushing becoming loose or worn out.

Symptoms of a malfunctioning Bushing include:

• Loose-feeling knobs that wobble or are difficult to turn
• Excessive wear or visible damage to the knob or panel area
• Difficulty in achieving precise temperature control
• Unusual noise when turning the knobs

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This lamp assembly replaces a refrigerator interior light to restore safe, visible illumination for food storage areas. It provides a direct-fit housing and socket that mounts where the original interior lamp was installed. What it does:

• Houses and secures the refrigerator interior light so the compartment stays illuminated.
• Provides the electrical connection and socket for the interior lamp bulb.
• Common fix for lights that flicker, fail to turn on, or have a loose or damaged housing.
• Helps restore normal visibility for loading, unloading, and inspecting contents.

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the lens and bulb carefully to avoid breakage; replace the bulb if damaged.
• Use basic hand tools; avoid forcing fasteners—align tabs and clips to seat the assembly.

This replacement cover protects internal components and restores your appliance's finished appearance. It fits the factory location to keep parts shielded from debris and accidental contact. What it does

• Replaces a cracked, broken or missing cover to stop exposed components and reduce risk of damage
• Helps prevent debris and moisture from entering internal areas that can cause malfunctions
• Eliminates rattles or vibration caused by a loose or damaged housing piece
• Restores a clean, finished look to the appliance exterior

• Disconnect power to the appliance before starting any repair
• Basic hand tools such as a screwdriver may be required; keep fasteners from the original part for reuse if in good condition
• Handle part carefully to avoid scratching the finished surface during installation

The LP Conversion Kit with Instructions is an OEM replacement part for Frigidaire gas appliances. This kit is designed to convert a natural gas appliance to operate with liquid propane (LP) fuel. It includes all necessary components and instructions for a safe and effective conversion, ensuring optimal performance with propane.

Causes for needing an LP conversion kit typically include a change in the type of gas supply, such as moving to an area where propane is the primary fuel source. Proper installation is crucial to maintain safety and efficiency during operation.

Symptoms indicating the need for this kit include:

• The appliance is not functioning due to an incompatible gas type
• Incorrect or inconsistent burner flames
• Relocation to an area with propane-only gas service

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This medium crown burner sits on the gas cooktop/range burner to shape and distribute the flame for even heating. Replacing a worn or damaged crown restores reliable ignition and a consistent flame pattern on the medium-output burner.

• Distributes gas evenly around the burner for steady, uniform heat
• Works with the igniter for reliable lighting when properly seated
• Helps protect burner ports from spills and debris
• Helps with uneven or yellow flames, delayed ignition, inconsistent lighting, or visible cracks/warping

• Disconnect power and shut off gas; allow the surface to cool completely
• Remove the old crown and clean the mating surfaces
• Align the new crown with any locator pins/notches and seat it flat; if screws are present on your model, tighten gently and evenly
• Restore gas/power and test for proper ignition and flame pattern

This temperature-sensing probe measures internal appliance temperature and sends readings to the control board so the unit can maintain correct cooling or defrost cycles. Replaces a failed or damaged probe to restore temperature feedback. What it does

• Detects internal temperature and relays it to the control board for accurate cooling and defrost control
• Can cause temperature drift, excessive run times, or failed defrost cycles when faulty
• May trigger temperature-related error codes or cause food to become too warm or too cold
• Works as the control system's feedback element; compatible with the original connector style

• Disconnect power before installing to avoid shock or damage
• Handle the sensor tip and wiring gently; avoid kinking or pulling the lead
• Ensure the connector is fully seated and routed away from moving parts or heating elements

This replacement cap covers and protects exposed fasteners and trim on compatible Frigidaire appliances, restoring a finished appearance while helping keep out dirt and moisture. A simple, low-cost part for cosmetic and protective repair. What it does:

• Covers exposed fasteners, hinge posts, or trim edges to restore the appliance's finished look
• Helps prevent dirt, debris and moisture from entering mounting points and seams
• Can reduce rattling or vibration caused by missing or damaged trim pieces
• Snaps or presses into place to conceal hardware without altering function

• Typically installs by snapping into position; no special tools usually required
• Work with the appliance powered off if accessing areas near electrical components
• Inspect mating surfaces for damage or debris before installing for a secure fit
• Replace with identical OEM cap for correct fit and appearance

This blower motor assembly circulates air through the evaporator and freezer compartment to maintain even cooling and proper frost control. Replacing a worn motor restores airflow and helps keep temperatures consistent. What it does

• Spins the evaporator fan to move cold air through the freezer and refrigerator sections.
• Restores proper airflow when the fan motor is worn, noisy, or not running.
• Helps prevent warm spots, frost buildup, and longer run cycles caused by poor circulation.
• Reduces abnormal noise from a failing blower motor or imbalanced fan blade.

• Disconnect power to the appliance before starting any repair.
• Handle the fan blade carefully to avoid bending or damage; keep fingers and tools clear while testing.
• After installation, verify the fan spins freely and the appliance returns to normal temperature and noise levels.

This power cord supplies electrical power to the appliance, restoring a safe, factory-style connection between the outlet and the unit. Use it to replace a damaged or worn lead to regain reliable power. What it does:

• Replaces a worn, frayed or damaged power lead to stop intermittent power or visible cord damage
• Restores a secure electrical connection when the original cord is cut, melted or has exposed wires
• Helps eliminate power-related failures caused by broken conductors or loose cord terminals
• Works as the external mains connection between the appliance and household power

• One power cord

• Always unplug the appliance or switch off house power at the breaker before replacing the cord
• Verify the cord's terminal type and wire count match your appliance before installation
• Tighten terminal connections to the manufacturer's specified torque and secure strain relief where provided