Fcfg3062as Parts

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker so you get a steady supply when needed and stop unwanted leaks. Replaces a worn or faulty valve to restore proper fill and dispensing. What it does

• Opens and closes to allow water into the ice maker and dispenser when requested
• Stops water flow to prevent overfilling or continuous running
• Commonly replaced when dispenser or ice maker won't fill, has weak flow, or leaks
• Works with the refrigerator's water line and solenoid actuators to meter supply

• One water inlet valve (single unit as shown)

• Disconnect power and shut off the household water supply before starting
• Drain lines and remove front or rear access panels to reach the valve
• Inspect and replace any damaged water lines or fittings; tighten connections and check for leaks after installation

This door gasket is a direct-replacement refrigerator door seal that helps maintain an airtight closure to keep cold air in and reduce energy loss. It restores proper sealing around the door for more consistent internal temperatures. What it does:

• Forms a tight seal around the refrigerator door to help prevent warm air intrusion and frost buildup
• Helps maintain consistent internal temperatures for better food preservation
• Reduces compressor run time caused by a leaking door seal
• Addresses common symptoms like visible gaps, cold air loss, or condensation at the door edge

• One replacement refrigerator door gasket

• Turn off power to the appliance and empty the door prior to replacing the gasket
• Remove the old gasket carefully to avoid damage to the door finish or mounting channel
• Warm and flex the new gasket as needed for easier installation and to help the gasket seat properly

This ignitor/orifice is the replacement part for the oven's gas burner ignition assembly, helping the burner light reliably so your oven can reach and hold cooking temperature. Designed to restore proper ignition function. What it does:

• Provides the ignition pathway and orifice for the oven burner so gas can be lit safely
• Restores consistent ignition when the burner fails to light or lights intermittently
• Can stop clicking or sparking without ignition when the orifice or ignitor is compromised
• Helps produce an appropriate pilot/ignition spark for stable burner operation

• Turn off gas supply and power to the appliance before starting any service
• Inspect surrounding gaskets and fittings for leaks or damage when replacing the part
• Hand-tighten fittings and follow torque guidance from the oven's service manual where applicable

This water inlet valve controls the flow of water into the refrigerator for the dispenser and ice maker, restoring reliable water delivery and proper ice production when the valve fails. Designed to match OEM fit and function. What it does:

• Opens and closes to let water into the ice maker and water dispenser when activated
• Stops water flow to prevent leaks when the refrigerator is off or not calling for water
• Commonly replaced for symptoms like no water at the dispenser, slow water flow, or no ice production
• Works with the refrigerator's solenoid control to regulate water delivery

• One water inlet valve assembly

• Disconnect power and shut off the home water supply before starting any repair
• Inspect water lines and fittings for damage; replace damaged lines to prevent leaks
• Mounts in the refrigerator base or rear per the OEM configuration; use original hardware where possible

This replacement water fill tube routes the refrigerator's water to the ice maker so it can fill and form ice reliably. It restores proper water delivery when the original tube is cracked, clogged, or leaking. What it does:

• Directs water from the fridge fill valve to the ice maker inlet
• Helps stop intermittent or constant water leaks when damaged
• Restores normal ice production when a failing tube causes underfilling
• Fits where the original rigid or flexible fill tube was installed

• One replacement water fill tube (quantity: 1)

• Only install with the refrigerator unplugged and water supply shut off
• Verify orientation and routing match the removed tube to avoid kinks or pinches
• Inspect and replace any worn clamps, fittings, or seals while access is available

This decorative door trim restores the finished appearance of the appliance door and covers the gap between panels for a clean, factory look. It replaces damaged, scratched, or loose trim to improve appearance and protect underlying edges. What it does:

• Covers and finishes the edge of the appliance door or panel for a seamless look
• Hides exposed fasteners and panel seams to restore factory appearance
• Prevents dirt buildup along the door edge and protects underlying surfaces
• Common symptom: visible cracks, scratches, broken clips, or a loose/misaligned trim piece

• One decorative trim piece as shown

• Disconnect power to the appliance before starting any repair
• Installation typically requires removing the door or panel fasteners to access mounting clips or screws
• Handle carefully to avoid scratching the new trim; do not force clips—align before pressing into place
• Replace with OEM fasteners for correct fit

This electronic control board replaces the main console control used to operate oven functions and display. Restores responsive touchpads, timed cooking, and accurate heat control so ranges run correctly. What it does:

• Manages oven cycles, temperature commands, timers and display feedback
• Processes user inputs from the console and sends signals to relays and heating elements
• Helps resolve symptoms like unresponsive touchpad/buttons, blank or erratic display, or failure to start selected bake/broil cycles
• Works as the central logic board coordinating range/oven functions

• One electronic control board

• Disconnect power at the breaker or unplug the appliance before replacing the board
• Handle the board by the edges and avoid touching components; observe ESD precautions
• Follow OEM wiring and mounting layout; match connectors and screw locations exactly

This screw is a factory replacement fastener used to secure panels, trim, or internal components so parts stay aligned and stable during normal use. It restores proper fit and reduces rattles from loose hardware. What it does

• Secures panels, brackets, or trim pieces to the appliance chassis
• Restores proper alignment when hardware is missing or worn
• Helps stop vibration or rattling caused by loose or missing fasteners
• Replaces stripped, damaged, or lost screws to allow correct reassembly

• Screw

• Disconnect power and water to the appliance before servicing when applicable
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or part damage
• Wear gloves to protect hands from sharp edges and steady small parts during installation