Fcrg306lafd Parts

This insulation panel fits inside the refrigerator cabinet to help maintain interior temperatures and reduce heat transfer to the outer shell, supporting more consistent cooling and helping limit frost buildup. What it does:

• Forms a thermal barrier between the interior liner and outer cabinet to help hold cold air inside.
• Helps reduce frost and moisture buildup around the liner when intact.
• Worn, torn, or missing insulation can contribute to longer run times, uneven cooling, or more frequent defrost cycles.
• Replaces damaged insulation to restore proper temperature retention and improve appliance efficiency.

• Always disconnect power to the appliance before starting any repair.
• Panel may be secured with clips, adhesive, or foam sealant; remove and install carefully to avoid damaging the liner.
• Inspect surrounding seals, gaskets, and fasteners while accessing the cavity; replace any damaged components.

This control panel replaces a worn, cracked, or cosmetically damaged console surface and restores clear button markings and access to controls. Fits the factory console opening and preserves the appliance's original look. What it does

• Provides the visible console surface that houses the control buttons and display
• Replaces cracked, chipped, or faded panels that make controls hard to read or use
• Restores a clean appearance and correct button/overlay alignment
• Helps prevent dirt and moisture from reaching the internal controls

• Disconnect power to the appliance before starting any work
• Handle the panel carefully to avoid scratching or bending during installation
• Installation typically requires removing console screws and any trim pieces; keep fasteners organized

This is the glass panel used in the oven door window. Replace it to restore a clear view into the oven and maintain the door's proper heat barrier if the original pane is cracked, shattered, or damaged.

• Forms the viewing window and thermal barrier in the oven door
• Helps the oven retain heat for consistent cooking
• Direct replacement for a cracked, shattered, or missing pane
• Typical symptoms: visible cracks, shattered glass, rattling fragments, or reduced visibility

• Disconnect power or gas and allow the oven to cool completely before service
• Wear cut-resistant gloves and eye protection; handle broken glass with care
• Support the door; remove the door and any trim as outlined in your model's service information
• Transfer any reusable brackets/trim from the original glass and avoid overtightening fasteners

The Panel is an OEM part for Frigidaire ranges that covers the exterior of the storage drawer of your range.

A bad panel can be caused by accidental impacts, discoloration, or damage over time. Signs of a faulty front panel include cracks, scratches, or a worn-out appearance.

Symptoms of a bad panel include:

• Cracked or damaged front
• Discoloration, scratches or stains  
• A worn-out or faded appearance

Replace your damaged or worn-out panel with this genuine OEM Frigidaire part to restore restore your range. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This main top is the single-piece cooktop surface that provides the finished top for your range and supports burners and control hardware. It restores a flat, secure surface for safe cooking and appearance. What it does:

• Replaces a dented, rusted or warped cooktop surface to restore proper fit and appearance.
• Supports burners, grates and control components so elements sit evenly and operate correctly.
• Prevents drafts and heat gaps around burners that can affect cooking performance.
• Helps keep spills contained and simplifies cleaning compared with a damaged top.

• Disconnect power before attempting service.
• Remove grates, burners, and control panel fasteners as needed to access mounting screws—refer to your model diagram.
• Lift and align the replacement top carefully to avoid damaging trim or controls; secure with original fasteners.

This main top is the upper cooktop panel that covers and protects the range's burners and internal components while providing a stable surface for cookware. It restores the cooktop's appearance and containment of spills. What it does:

• Covers the range's internal components and supports burners or cooking elements
• Helps contain spills and prevents debris from falling into the cabinet area
• Restores a flat, secure surface for cookware and controls
• Replaces damaged, warped, or heavily scratched top panels that affect function or appearance

• Main top assembly (1)

• Disconnect power (and gas if applicable) before starting any repair
• Handle edges carefully — metal panels and mounting points can be sharp
• Some disassembly of burners, knobs, or trim may be required; keep fasteners organized
• Follow the OEM service instructions for correct alignment and secure mounting

This replacement cooktop grate restores a stable cooking surface on compatible gas ranges. It supports cookware and helps maintain even heat contact so pots and pans sit securely during use. What it does:

• Replaces a cracked, chipped or warped cooktop grate that can cause cookware to wobble
• Provides a stable platform for pots and pans over gas burners
• Helps keep burners accessible and properly positioned for even flame contact
• Resists normal cooking wear when handled and cleaned according to your range's care instructions

• One cooktop grate

• Allow cooktop and burners to cool completely before removing or installing the grate
• Lift the old grate straight up to remove; set the new grate into place so it rests evenly on the cooktop supports
• Handle carefully—grates can be heavy and may have sharp edges if damaged
• Follow your range manufacturer's cleaning and care instructions to avoid damaging the grate finish

This door gasket is a direct-replacement refrigerator door seal that helps maintain an airtight closure to keep cold air in and reduce energy loss. It restores proper sealing around the door for more consistent internal temperatures. What it does:

• Forms a tight seal around the refrigerator door to help prevent warm air intrusion and frost buildup
• Helps maintain consistent internal temperatures for better food preservation
• Reduces compressor run time caused by a leaking door seal
• Addresses common symptoms like visible gaps, cold air loss, or condensation at the door edge

• One replacement refrigerator door gasket

• Turn off power to the appliance and empty the door prior to replacing the gasket
• Remove the old gasket carefully to avoid damage to the door finish or mounting channel
• Warm and flex the new gasket as needed for easier installation and to help the gasket seat properly

This spacer positions and separates appliance components to maintain correct alignment and reduce rubbing or wear. It helps keep panels or assemblies properly spaced for smooth operation and longer part life. What it does:

• Keeps mating parts at the correct distance to prevent contact or friction
• Helps align panels, brackets, or assemblies during assembly and operation
• Reduces vibration transfer and wear between adjacent components
• Supports proper clearance for seals, doors, or moving parts when specified

• One spacer

• Install in the exact location shown in the appliance parts diagram; confirm orientation before tightening
• Use correct fasteners and torque as specified by the manufacturer
• Disconnect power and follow all safety procedures before servicing electrical appliances
• If other parts show damage or excessive wear, inspect and replace as needed for a complete repair

This bodyside bracket secures the cabinet/body components to the refrigerator frame, helping keep panels aligned and stable for smooth door operation and consistent sealing. Durable replacement for worn or damaged mounting hardware. What it does:

• Provides a stable mounting point between the cabinet side and internal frame to maintain panel alignment
• Helps prevent cabinet movement that can cause door misalignment or uneven gaps
• Restores proper support after impact, corrosion, or stripped fastener holes
• Compatible with common service repairs where the original bracket is bent or broken

• Designed for use with manufacturer-specified fasteners; reuse or replace screws as needed
• Remove power and empty nearby shelves before working to avoid injury or damage
• Use basic hand tools; avoid overtightening fasteners which can crack plastic or deform panels