Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
10 - 16 x 3/8 , hex
This was an easy fix. The wash funnel snapped right onto the base. . Read more
Replaced lines with exact replacement lines. quick and clean. Read more
Includes actuator
We took off the front door cover and found that the vent had failed some time ago- the flap was frozen open, the motor did not work. We removed the three screws and the vent came of- putting the new one back was just that simple except that I had to remove the protective paper from the adhesive covered gasket around the surface of vent. Testing showed that the flap was now free but did not close during the running cycle. I swapped the leads from the dispenser motor with those on the vent and... Read more
My wife,discovered that our dishwasher was leaking water; onto the floor,be concerned,we called a repairman to look into the problem. When he had evaluated the problem,he informed us that we would need a new dishwasher,as that the heater coil had burned a hole into the bed of the machine! However,after some investigations,I decided to call (AppliancePartsPros.com) and upon explaining the situation,I was advised to purchase a (Heater Bracket) and this with my Prayer; corrected our situation; No... Read more
Replaced center spray arm and wash funnel base. Read more
I put in 4 new parts ad gave it a try. had water under dish washer about the size of a half dollar , I dried it up and washed more dishes and pots. No leak that time, and it has been doing fine since. I'd say water was just what was laying on the water lines and shook off. If you see water the first time don't worry wipe it up and use it some more to see if it leaks. GOOD LUCK!!! Read more
NO.8 - .625 Truss
I unplugged the dishwasher first. Then I unscrewed the door plate on the inside of my dishwasher. A friend who was helping me took a picture of the old control panel for reference. He figured out the parts that unsnapped and pulled out the 2 main colored cords. He then pulled out the old control panel and snapped in the new one. He put in the colored plugs and snapped on the top cover over the control panel, I screwed the screws back in and then I replaced the sticky printed control panel strip... Read more