Ffghf3047lsh Parts

This receptacle is an electrical connector that links the appliance wiring harness to a component, restoring a secure, low-resistance connection for reliable power delivery and signal transfer. What it does:

• Provides a secure electrical connection between the wiring harness and a component.
• Ensures consistent power or signal flow to lights, controls, or motors.
• Common symptom indicators: intermittent or no power to a component, flickering lights, or component failure when the connector is damaged or corroded.
• Helps prevent poor contact that can lead to arcing or heat buildup at the connection.

• Disconnect power to the appliance before inspecting or replacing the connector.
• Verify connector orientation and fully seat until it clicks or is secure; do not force.
• Inspect wiring for damage; replace or repair damaged wires before installing the new receptacle.

This replacement support is a small mounting bracket that secures internal components and panels so appliances run quietly and reliably. It restores proper alignment and reduces movement that can cause noise or wear. What it does:

• Holds and stabilizes internal panels or assemblies to prevent sagging or misalignment
• Limits vibration and rattling that can lead to noise during operation
• Keeps connected parts aligned so mechanical linkages and doors operate smoothly
• Helps prevent abrasion or wear from loose components rubbing together

• Disconnect power and water before starting any repair
• Use basic hand tools; handle edges carefully to avoid cuts
• Keep fasteners and orientation the same as removed; replace any damaged screws
• Test the appliance through a short cycle to confirm stability and noise reduction

The Burner Cap is an OEM replacement part that fits Frigidaire ranges. It is responsible for covering the large burner on the cooktop. Over time, the cap can become damaged from heat exposure and food debris. Causes of failure include cracking, warping, and corrosion. 

Symptoms of a failing burner cap include:

• Uneven or abnormal flame
• Ignition issues
• Improper fit and instability

This Frigidaire cap is also compatible with Gibson, White Westinghouse, Kelvinator, and Kenmore ranges

The Thermocouple is an OEM component specifically designed for Frigidaire gas ranges. Located near the burners, this temperature-sensitive device controls gas valve operation.

Over extended use, high temperatures can cause internal wire elements to oxidize or break apart limiting functionality. Inaccurate readings impact safety.

Signs of a failing thermocouple involve:

• Unsteady or abnormal burner flame patterns  
• Inconsistent cooking temperatures between uses
• Pilot flames are unable to maintain ignition reliably

Replacing with this OEM Frigidaire part restores reliable temperature regulation for gas combustion. Compatibility extends to Kenmore, Gibson, and Electrolux ranges ensuring optimized safety and performance. Peace of mind comes with an authorized replacement!

The Top Burner is an OEM part for Frigidaire gas ranges. It distributes heat from gas flames efficiently. 

Repeated thermal cycling causes burner components to expand and contract over time. Fatigue weakens fine flame control and stability. 

Causes relate to typical thermal stressing expected with daily cooking use. Impacts risk part fractures from unintentional damage as well.

Symptoms of a bad top burner involve: 

• Unstable or irregular flames while gas is flowing
• Difficulty achieving a precise simmer setting  
• Warped or misshapen burner head surfaces

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is the glass panel used in the oven door window. Replace it to restore a clear view into the oven and maintain the door's proper heat barrier if the original pane is cracked, shattered, or damaged.

• Forms the viewing window and thermal barrier in the oven door
• Helps the oven retain heat for consistent cooking
• Direct replacement for a cracked, shattered, or missing pane
• Typical symptoms: visible cracks, shattered glass, rattling fragments, or reduced visibility

• Disconnect power or gas and allow the oven to cool completely before service
• Wear cut-resistant gloves and eye protection; handle broken glass with care
• Support the door; remove the door and any trim as outlined in your model's service information
• Transfer any reusable brackets/trim from the original glass and avoid overtightening fasteners

This inner oven door glass replaces a cracked or fogged inner panel to restore heat containment and visibility. It fits into the oven door assembly to help maintain safe operation and even cooking performance. What it does

• Serves as the inner glass panel inside the oven door to contain heat and protect the outer door components
• Restores clear viewing of the oven cavity when cracked, scratched, or clouded
• Helps maintain correct oven temperature by sealing the door assembly
• Reduces risk of heat loss and improves energy efficiency when intact

• 1 inner oven door glass panel (exact fitment depends on your oven model)

• High-level task: remove the oven door per manufacturer instructions before replacing the inner glass
• Use gloves and eye protection; glass edges may be sharp
• Tighten fasteners to OEM torque specs and check door alignment after reassembly
• If door or outer glass is damaged, inspect entire door assembly and replace as needed

This orifice controls the gas flow to a single oven burner, helping the burner produce the correct flame for consistent cooking. Replace a clogged or damaged orifice to restore proper burner performance and heating. What it does:

• Regulates gas flow to a specific oven/broiler burner for correct flame size and heat output
• Helps maintain even oven temperature and consistent cooking results
• Common symptom: weak or uneven flame, poor heating, or burner that won't light reliably
• Can become clogged by debris or fail from corrosion over time

• Turn off gas supply and electrical power before starting work; follow local codes
• Only install on the matching burner and ensure correct seating and alignment
• Use proper tools and check all connections for gas leaks after installation

This control panel is the user interface assembly that houses the touch pads and display to operate your appliance. It restores responsive controls and clear status feedback so you can select settings and monitor cycles. What it does

• Provides the touchpad/buttons and display for selecting cycles, temperatures, and settings
• Sends user commands to the appliance's control board so functions start and stop as expected
• Helps display cycle status, temperature readouts, and error codes when applicable
• Commonly replaced when buttons are unresponsive, the display is blank or intermittent, or control inputs fail

• One control panel (console assembly)

• Always disconnect power (unplug or shut off breaker) before starting service
• Handle the display and button surfaces carefully to avoid scratching or damaging the overlay
• Verify connector seating and wiring harness alignment during reassembly