Ffghf3047lsh Parts

This replacement control panel overlay restores the front graphics and button labels used on the appliance's user interface, improving visibility and appearance. It fits over the existing control area to replace damaged, faded, or worn overlays. What it does:

• Replaces cracked, peeled, or heavily worn control graphics so settings and icons are legible
• Restores the appliance's original appearance around the control area
• Provides the correct printed labels for buttons and touch points to reduce user confusion
• Helps protect the underlying control surface from everyday wear

• Designed to install onto the existing control panel; follow OEM instructions for removal of the old overlay
• Disconnect power to the appliance before beginning any service to avoid shock or accidental operation
• Use care when removing adhesive-backed overlays to avoid damaging underlying surfaces

The Fan Assembly is an OEM part for Frigidaire ranges. Located inside the oven cavity, it works with the heating elements to evenly circulate hot air throughout the cooking chamber.

Causes of failure can include wear and tear on the fan blades or bearings ceasing proper rotation over many heating cycles. Damage to the motor windings or wiring from moisture is also common. 

Symptoms of a faulty fan assembly involve:

• Improper or uneven cooking due to inconsistent temperature distribution
• Burnt or undercooked spots on food from hot or cold spots   
• Loud grinding noises emanating from the oven  

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This factory screw secures components in your appliance, restoring a tight, rattle-free fit. Replace missing or damaged hardware to keep panels, brackets, and trim properly fastened and aligned for safe, reliable operation.

• Secures panels, brackets, trim, or internal components to the chassis
• Replaces lost, rusty, stripped, or cross-threaded screws
• Helps eliminate looseness, gaps, and vibration/rattling
• Common signs: loose/misaligned panels or trim, rattling noises, missing or rounded screw heads

• Disconnect power (and shut off gas if applicable); allow the unit to cool completely
• Match to the original location and replace one at a time to maintain alignment
• Hand-start to prevent cross-threading; tighten snugly—do not overtighten
• Use light torque when threading into plastic or thin sheet metal

A replacement protective shield that covers and protects internal appliance components from debris, moisture and incidental contact. Restores protection to damaged or missing shields to help maintain safe, reliable operation. What it does:

• Covers and protects wiring, connectors or nearby parts from accidental contact and debris
• Helps prevent moisture or food particles from reaching sensitive components
• Replace if the shield is cracked, warped, missing or allows exposed parts
• Reduce rattles or contact-related noises caused by loose or damaged shields

• Shield

• Disconnect power to the appliance before starting any repair
• Use care around sharp edges; wear gloves and eye protection
• Remove fasteners holding the old shield; reuse or replace screws as specified by the manufacturer

The Hinge is an OEM component specially designed for Frigidaire wall ovens. Responsible for securely mounting the heavy oven door during continuous opening/closing cycles, it ensures safe, reliable use.

Constant load stress from opening doors causes typical wear degrading precision fit reducing function over years of use. Oven access suffers from misaligned closures.

Symptoms indicating hinge issues involve:  

• Difficulty fully opening or stabilizing door position
• Noisy or off-center door alignment disturbing recipes  
• Sagging or loose door fit risking accidental closing 

Causes relate to normal metal component fatigue from sustained weight bearing multiplied by every use cycle. Impacts damage lubrication preventing smooth pivoting.

Replacing with this OEM Frigidaire hinge restores a secure, balanced opening for convenient recipe checks. Compatibility also fits some Kenmore, Gibson, and Electrolux wall ovens renewing a well-supported entrance for safety and long-lasting enjoyment. 

This replacement light lens covers and protects an interior appliance light, restoring a finished look and shielding the bulb from spills and debris. It helps maintain proper light diffusion and prevents direct contact with the bulb. What it does:

• Protects the interior light bulb from food, water and impact
• Diffuses light for more even illumination inside the appliance
• Prevents direct contact with a hot bulb to reduce burn risk
• Replaces cracked, cloudy or missing lenses that cause glare or poor lighting

• One light lens (single piece)

• Disconnect power or unplug the appliance before servicing to avoid shock
• Handle the lens carefully to avoid cracking; use a soft cloth when installing
• If the lens is held by screws or clips, save and reuse the fasteners unless replacement is required

A replacement hex-head screw used to secure appliance regulator brackets and similar small components. Restores proper fastener fit so panels and brackets stay firmly attached. What it does

• Fastens regulator bracket and related sheet-metal components
• Provides a secure threaded connection for components where an 8-18 thread is specified
• Helps eliminate looseness or rattling caused by a missing or damaged screw
• Matches the nickel/chrome finish commonly used on interior mounting locations

• One hex head screw (8-18 x 3/8), nickel finish

• Intended for use where an 8-18 x 3/8 hex screw is specified by the manufacturer
• Tighten to snug; avoid over-torquing which can strip sheet-metal threads
• Turn off power to the appliance before accessing internal components
• If the original screw used a lock washer or threadlocker, replace or reapply as appropriate

This valve mounting screw secures refrigerator water/ice valve assemblies and their mounting brackets, helping keep the valve stable and properly aligned. A simple replacement to address loose or vibrating valve hardware. What it does:

• Secures the valve mounting bracket to the appliance cabinet or valve body
• Fits standard 1/4-20 threaded valve mounting points
• Restores secure mounting when original screw is loose, missing, or stripped
• Helps reduce vibration-related noise and the risk of valve movement that can lead to leaks

• Disconnect power and shut off the water supply before servicing
• Start the screw by hand to avoid cross-threading, then tighten until snug
• Do not over-tighten; replace if threads are stripped or damaged

This cabinet insulation helps reduce heat transfer inside the refrigerator, supporting stable temperatures and efficient cooling. Replacing damaged or missing insulation can improve temperature control and reduce frost buildup. What it does:

• Fills gaps between the cabinet and liner to slow heat transfer and maintain internal cold
• Helps the appliance reach and hold set temperatures more consistently
• Reduces condensation and excess frost on interior surfaces
• Can improve compressor run-time and overall energy efficiency when intact

• Disconnect power before starting
• Remove food and shelving from the compartment before accessing the insulation
• Handle insulation carefully to avoid tearing; secure per manufacturer routing and adhesive points
• Dispose of old insulation per local regulations

The Rear Filler Kit is an OEM part for Frigidaire ranges. It is responsible for sealing gaps and maintaining proper ventilation at the rear of the range. The filler kit prevents air leaks while allowing heat to properly escape from the oven cavity.

Causes of a bad rear filler kit can include normal wear and tear over time, damage that has compromised the sealing properties, or improper installation that has left gaps.

Symptoms of a bad rear filler kit include:

• Improper or uneven baking and broiling results
• Higher than normal temperatures on oven surfaces or cabinets nearby
• Excessive drafts or cold air felt around oven door or oven controls

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Burner Cap is an OEM part for Frigidaire gas ranges. As a protective cover, the burner cap sits securely over each gas range burner to deflect heat upwards towards pots and pans.

Causes of a bad burner cap can include cracked or warped surfaces from high heat exposure over time. Surface imperfections compromise the cap’s protective function.

Symptoms of damaged burner caps include: 

• Warped or misshapen surfaces that no longer lay flat
• Cracks or breaks that expose the burner flame 
• Gaps that allow spatters or boilovers to seep below

This replacement is compatible with select models by Alliance Laundry Systems, Crosley and Kelvinator brand ranges as well. Protect your cooktop and upgrade today.

This thermostat is the temperature control used in many refrigerators to switch the compressor on and off and help maintain set temperatures. It replaces a failed or unreliable control to restore consistent cooling. What it does:

• Senses interior temperature and signals the compressor or evaporator fan to cycle on and off
• Stops continuous running when the refrigerator reaches the selected temperature
• Helps prevent food spoilage caused by overcooling or warming when the control fails
• Common symptom: fridge runs constantly or does not reach/hold the set temperature

• One thermostat control

• Disconnect power before starting; verify power is off to avoid shock
• Accessible from the control housing or behind the temperature control knob—follow OEM service instructions for your model
• Handle the capillary tube and sensor carefully; do not kink or crush

This oven control knob replaces a worn, broken or missing control knob to restore safe, easy temperature and function selection. It fits the oven control shaft and provides a firm grip for reliable turning and setting. What it does:

• Fits over the oven control shaft to allow manual selection of temperature or cooking functions
• Restores a secure grip when the original knob is cracked, stripped, or missing
• Helps prevent accidental changes by providing a positive stop and tactile feedback
• Works with ovens/ranges that use a shaft-mounted control knob design

• Disconnect power to the appliance before servicing to avoid shock or injury
• Pull the old knob straight off the control shaft; align and press the replacement onto the shaft until fully seated
• If the knob won't seat, check the shaft type (D-shaft or splined) and orientation; do not force
• Test control operation after installation; inspect the control shaft or switch for damage

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

This replacement cabinet frame restores the appliance's front trim for a clean, finished appearance and proper panel alignment. It helps keep edges covered and maintains the door/cabinet fit. What it does:

• Provides the front trim/frame that supports and aligns the appliance cabinet or door panels
• Covers exposed edges for a finished look and helps reduce drafts or light gaps
• Helps eliminate rattling or misalignment caused by a damaged or warped frame
• Matches OEM fit to replace a cracked, bent, or cosmetically damaged frame

• Disconnect power (and water for appliances with water) before beginning any work
• Basic hand tools typically needed; retain all fasteners from the original part for reassembly
• Handle carefully to avoid scratching the finish; check fit before tightening fasteners