Ffghf3047lsh Parts

This spacer positions and supports components to maintain proper alignment and clearance in the appliance. It prevents rubbing and ensures panels or parts sit correctly for reliable operation. What it does:

• Keeps panels, brackets or assemblies spaced correctly to prevent contact and wear
• Restores proper alignment to reduce vibration, noise or rubbing symptoms
• Maintains clearance for airflow or moving parts where specified
• Provides a stable mounting point for adjacent components

• One spacer

• Install in the location shown in the service diagram and secure with the original fasteners
• Disconnect power to the appliance before beginning service to avoid shock or injury
• If the original spacer shows damage or distortion, replace it to restore correct fit

The Bushing is an OEM part for Frigidaire cooktops. This part serves as an interface between the control knob and the appliance, ensuring smooth operation and protecting both the knob and the control panel from wear and tear. The bushing fits snugly around the valve's stem, reducing friction and providing stability as the knob is turned to adjust the heat settings of the cooktop.

Causes of a bad Bushing can include degradation from frequent use, exposure to high heat, or accidental damage during cleaning or use, which can lead to the bushing becoming loose or worn out.

Symptoms of a malfunctioning Bushing include:

• Loose-feeling knobs that wobble or are difficult to turn
• Excessive wear or visible damage to the knob or panel area
• Difficulty in achieving precise temperature control
• Unusual noise when turning the knobs

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Burner is an OEM part for Frigidaire gas ranges and cooktops. It is a stainless steel component that emits radiant heat from below the cooktop grates, facilitating safe, efficient cooking. 

Proper burner operation is essential for dependable cooking performance. The burner utilizes a gas control valve and orifice to deliver a precisely regulated flame that heats pots and pans quickly and evenly.

Causes of a bad burner can include cracks or holes developing from use over time, or damaged brass burners from spills or heat exposure.

Symptoms of a bad burner include: 

• Irregular or uneven cooking temperatures
• Burner flames that are too high or low  
• Yellow flame tips instead of blue
• Non-selective control or inability to adjust flames

Replacing the burner with a genuine Frigidaire part restores robust heat output. This ensures safe, efficient operation. It is also compatible with Gas ranges by Electrolux, Gibson, Kelvinator, and Kenmore.

The Burner is an OEM part for Frigidaire gas ranges and cooktops. It is a stainless steel component that emits radiant heat from below the cooktop grates, facilitating safe, efficient cooking. 

Proper burner operation is essential for dependable cooking performance. The burner utilizes a gas control valve and orifice to deliver a precisely regulated flame that heats pots and pans quickly and evenly.

Causes of a bad burner can include cracks or holes developing from use over time, or damaged brass burners from spills or heat exposure.

Symptoms of a bad burner include: 

• Irregular or uneven cooking temperatures
• Burner flames that are too high or low  
• Yellow flame tips instead of blue
• Non-selective control or inability to adjust flames

Replacing the burner with a genuine Frigidaire part restores robust heat output. This ensures safe, efficient operation. It is also compatible with Gas ranges by Electrolux, Gibson, Kelvinator, and Kenmore.
 

The Outer Oven Door Panel is an OEM component specially designed for Frigidaire electric ranges. Constructed of durable steel, it forms the front facade of the oven cavity entrance. 

Prolonged heating cycles from baking subject panels to thermal stresses that cause warping and paint discoloration over time due to typical door element heating and cooling. Fatigue jeopardizes functionality.

Causes relate to the normal expansion and contraction cycles expected of an oven door exposed to repeated preheating. Impacts pose abrupt risks to the protective steel facing.  

Symptoms of a bad door panel involve:

• Unsightly stain pigment changes dimming the finish
• Noticeable bowing or tweaks in planar surfaces  
• Gaps appearing at seam borders from structural strain

Replacing with this OEM Frigidaire panel restores a smooth, attractive entrance for cooking tasks. Compatibility fits Kenmore, Electrolux, and Gibson brands ensuring steady performance with upgraded cosmetics.

The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.

Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.

Symptoms of a bad freezer lens include:

• Cloudiness, fogginess, or smears inhibiting internal visibility
• Cracks or breaks compromising the protective barrier
• Distorted views make it difficult to assess food levels
• Diffused lighting with shadows instead of a clear view

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Door Lock Motor and Switch Assembly is an OEM component specifically designed for Frigidaire ranges. This locking system safely secures oven doors during cleaning or self-clean cycles through the electromagnetic operation. 

Symptoms of a defective assembly include: 

• Failure to engage or release the door lock function
• Loud buzzing or grinding noises from internal mechanisms  
• Error codes related to door lock detection problems

Causes relate to wear from continual operation of locking solenoids over extended use. Exposure to cooking residues and cleaning chemicals can deteriorate switches. 

This OEM Frigidaire part is also compatible with some Kenmore and GE appliance brands. Replacing worn components restores reliable door locking to automatically secure during high-heat cycles. Timely maintenance preserves safety functionality.
 

This stainless 30-inch door handle restores a secure, comfortable grip and a clean, factory look to the door. Use it when the original handle is loose, cracked, missing, or cosmetically damaged.

• Replaces a damaged, wobbly, or missing door handle to restore normal opening and closing
• Addresses symptoms like a loose or rattling handle, flexing under pull, or visible wear
• Stainless finish matches the original appearance on compatible units
• Sized to the manufacturer's 30-inch configuration for proper fit

• Disconnect power and allow hot surfaces to cool before servicing
• Support the door; on some models, removing the door provides better access to handle screws
• Transfer any trim/end caps and reuse existing mounting screws per your model's instructions
• Tighten screws evenly; do not overtighten to avoid damaging the door skin or glass

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This glide is a replacement drawer support that restores smooth, stable opening and closing for refrigerator/freezer drawers. It helps keep the drawer aligned and reduces sticking or rough movement. What it does:

• Supports the drawer on its track so it slides smoothly and stays level
• Replaces a worn, cracked or missing glide that causes catching or binding
• Helps reduce grinding, scraping or noisy operation when opening/closing the drawer
• Restores proper alignment so the drawer seats fully and seals correctly

• Disconnect power to the appliance or remove food before servicing for safety
• Remove the drawer and old glide per the appliance's disassembly instructions
• Slide or snap the new glide into the existing track; confirm proper engagement before reinstalling the drawer
• No special tools typically required;

This ignitor orifice assembly controls gas delivery to the oven burner so the ignitor can light the burner reliably. Replacing a worn or damaged assembly restores proper ignition for safe, consistent baking and broiling. What it does:

• Routes and meters gas from the valve to the oven burner so the ignitor can light the flame
• Supports consistent ignition timing for steady burner operation
• Common symptom: oven won't light or takes multiple attempts to light
• Common symptom: weak or uneven flame across the burner

• Turn off the appliance power and shut off the gas supply before servicing
• Inspect surrounding gaskets and fittings; replace damaged components and use thread sealant rated for gas if required
• After installation, test for leaks and proper ignition following local codes and manufacturer guidance

This glide is a replacement drawer slide that restores smooth opening and closing for refrigerator/freezer drawers and deli drawers. It helps stabilize the drawer and prevents binding or uneven movement for easier access. What it does:

• Guides and supports the drawer to ensure smooth in-and-out motion
• Replaces worn or broken slide surfaces that cause sticking or grinding
• Helps keep the drawer level so contents don't shift when opened
• Reduces drawer wobble and prevents the drawer from coming off its track

• Disconnect power to the appliance or remove the drawer per the manufacturer instructions before starting
• Remove the old glide hardware (retain any reusable screws) and position the new glide in the same orientation
• Use common hand tools (screwdriver) and avoid overtightening fasteners
• Check the mate glide/tracks and drawer alignment

This hot-surface oven igniter lights the burner in gas ovens and ranges so the oven can reach and hold cooking temperatures. It replaces a weak or failed igniter to restore reliable oven heat. What it does:

• Heats to a high temperature to ignite the oven burner safely and reliably
• Commonly used when the oven won't heat or takes a long time to reach temperature
• Works as a direct replacement for the oven's original hot-surface ignition element

• One oven igniter

• Disconnect power and shut off the gas supply before beginning any work
• Handle the fragile ceramic/glass element carefully to avoid cracking or damage
• Inspect wiring and connectors for heat damage; replace if corroded or brittle

This replacement glide helps a refrigerator or freezer drawer open and close smoothly and keeps the drawer aligned for reliable operation. It restores proper sliding action and reduces sticking or scraping. What it does

• Replaces a worn or broken drawer glide to restore smooth drawer movement
• Supports the drawer to prevent sagging and misalignment
• Helps reduce rubbing, sticking, and noisy operation during use
• Maintains proper drawer tracking so the drawer seats correctly

• Disconnect power to the appliance and remove food or contents from the drawer before starting
• Remove the drawer per your model's service instructions to access the glide
• Most installations are simple push-in or screw-replace procedures; keep fasteners from the original assembly

This ignitor orifice assembly routes gas to the igniter on compatible gas ranges and ovens, enabling reliable burner ignition and consistent flame control. Replacing a worn or damaged assembly restores proper ignition performance. What it does:

• Directs gas flow from the valve to the igniter/burner to allow ignition
• Ensures a focused, steady flame for consistent cooking heat
• Addresses ignition issues like repeated clicking, failed lighting, or weak flame
• Works as a replacement component when the existing orifice is clogged, corroded, or damaged

• Turn off gas supply and disconnect power before servicing.
• Basic hand tools typically required; follow OEM disassembly steps for access.
• After installation, check for gas leaks and proper ignition before normal use.