Ffht1835vw Parts

This replacement cover protects internal components and restores the appliance's exterior finish. It fits where the original cover was damaged, cracked, or missing to help keep parts shielded from dirt and debris. What it does:

• Replaces a damaged or missing cover to protect internal components and wiring
• Prevents dust, lint, and small debris from reaching sensitive parts
• Restores a finished appearance to the area where the original cover was mounted
• Helps maintain proper airflow paths when fitted correctly

• One replacement cover

• Disconnect power (unplug or shut off circuit breaker) before starting any repair
• Handle edges carefully; use gloves to avoid cuts from sheet metal or mounting tabs
• Remove fasteners holding the old cover, align replacement, and secure with the original screws or clips

This electronic compressor start device helps the refrigerator compressor start reliably so the appliance can cool normally. It replaces a failed start module to restore compressor startup performance. What it does:

• Provides the initial boost/starting assist to the refrigerator compressor motor
• Can stop compressor from running continuously or prevent it from starting if the module fails
• Commonly linked to symptoms such as a humming compressor, no cooling, or intermittent compressor start
• Designed as a direct replacement start module used with compatible compressor assemblies

• One compressor start device (electronic start module)

• Disconnect all power to the appliance before beginning work
• Access typically requires removing the service panel near the compressor; handle wiring and mounting hardware carefully
• Verify correct module orientation and secure electrical connections; avoid forcing connectors

This filter-drier removes moisture and contaminants from a refrigerator's sealed refrigerant circuit to help protect the compressor and improve cooling reliability. It's a service replacement for sealed-system repairs. What it does:

• Traps moisture and acid from refrigerant to reduce corrosion and oil breakdown.
• Captures particulate debris that can clog expansion devices and reduce cooling.
• Helps restore proper refrigerant flow after a compressor or tubing repair.
• Common symptom: system not cooling efficiently or refrigerant circuit contaminated after failures.

• One filter-drier (quantity: 1)

• Intended for certified HVAC/refrigeration technicians only; sealed-system service requires proper tools and refrigerant handling.
• Replace only when the system is opened for repair (compressor, tubing, or evaporator replacement).
• Must be brazed into the liquid line, evacuated, and charged per manufacturer refrigerant and service specs.
• Dispose of and handle used refrigerant and components according to local regulations.

This replacement pan collects condensate and drips to keep the appliance base dry and prevent water damage. It fits into the designated tray area and restores proper drainage for reliable operation. What it does:

• Catches defrost or condensation runoff to prevent puddling under the appliance
• Guides water toward the drain/evaporation area so the appliance can manage moisture
• Helps reduce musty smells and corrosion caused by standing water
• Works as the proper receptacle when the original pan is cracked, warped, or missing

• One replacement pan

• Disconnect power (or unplug) and remove access panels before installing
• Remove old pan carefully—dispose of any standing water and clean the area before installing the new pan
• Seat the pan fully in its mounting location so drains align; avoid forcing parts into place
• If you encounter damaged clips, screws, or surrounding components, replace or repair those items before use

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fastening so parts stay aligned and reduces rattling or looseness during operation. What it does:

• Fastens trim, panels or internal components to keep parts securely in place
• Restores proper alignment and prevents gaps that can cause vibration or noise
• Used where original factory screws have become stripped, lost, or damaged
• Matches the factory fit for a reliable, long-lasting hold

• One mounting screw

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can damage threads or plastic parts
• Disconnect power and follow appliance safety guidelines before servicing
• Compare head style and thread before installation

This housing assembly replaces a damaged or cracked outer housing to restore proper fit and protect internal components. It helps stop drafts, reduce vibration, and keep internal parts properly aligned for reliable operation. What it does:

• Protects internal components and wiring from damage and debris
• Maintains correct alignment for attached components and controls
• Helps reduce noise and vibration caused by a broken or loose housing
• Prevents gaps that can lead to leaks, drafts, or improper sealing

• Disconnect power to the appliance before beginning any repairs.
• Some disassembly of surrounding panels may be required; keep fasteners organized.
• Use basic hand tools; avoid forcing parts to prevent further damage.

This condenser coil assembly removes heat from the refrigerator's refrigerant so the appliance can cool properly. Replacing a damaged condenser helps restore efficient cooling and reduces compressor run time. What it does:

• Condenses refrigerant from a gas to a liquid so the cooling cycle can continue
• Supports proper heat rejection from the cooling system
• A faulty or clogged condenser can cause poor cooling, long run cycles, or a hot cabinet exterior
• Works with the condenser fan and compressor as part of the fridge's refrigeration system

• Disconnect power to the appliance before starting any service
• Work on a stable surface; condenser edges may be sharp—wear gloves and eye protection
• Inspect and clean the condenser area and condenser fan while replacing the part

This half-width deli drawer fits the fresh food compartment and restores proper fit and smooth sliding when the original is cracked or missing. It keeps meats, cheeses, and snacks organized and helps contain small spills.

• Holds and organizes deli items in the refrigerator's fresh food section
• Slides on existing rails beneath the shelf frame to store items and contain drips
• Replace if the original bin is cracked, warped, discolored, falls off the rails, or won't slide smoothly
• Restores original storage capacity and proper drawer alignment

• Remove contents and pull the old drawer straight out past the stops
• Align the new drawer with both rails and slide in until fully seated
• Allow plastic to warm to room temperature before installation; handle gently to avoid stress cracks
• Reinstall any existing lid/cover and ensure shelf frame and rails are undamaged and properly seated

The Capacitor is an OEM part for Frigidaire refrigerators. As an electrical component, it works behind the scenes to help power the compressor and ensure smooth, reliable refrigeration. Proper capacitor functioning is vital for starting and running the compressor motor efficiently.

Symptoms of a faulty capacitor can include:

• Inconsistent cooling power with temperature fluctuations  
• The refrigerator fails to start or cycles on and off frequently
• Buzzing or humming sounds coming from inside walls
• Cases of warm food due to inadequate freezing and cooling abilities

Potential causes involve natural breakdown over many compressor start-up cycles accumulated over 10+ years. Damage from power surges is also possible. 

Replace it with this genuine Frigidaire part to restore durable electrical support for the component operation. It prevents further wear and unnecessary service calls. Compatible with some Electrolux, KitchenAid, and Kenmore models that use Frigidaire components. 
 

The Compressor Starter is an OEM part for Frigidaire refrigerators. It is designed to assist the compressor in starting up and running smoothly, ensuring efficient cooling performance for your refrigerator.

A bad compressor starter can be caused by electrical issues, component failure, or damage. When the compressor starter becomes faulty, it can result in issues such as the compressor not starting, inadequate cooling, or the refrigerator not maintaining the desired temperature.

Symptoms of a bad compressor starter include:

• The refrigerator not cooling properly
• Unusual noises coming from the compressor area
• Compressor turning on and off rapidly
• The refrigerator not running at all

Replace your faulty compressor starter with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This factory screw secures interior or door components in your refrigerator so they stay tight and aligned. Replace missing, stripped, or corroded hardware to eliminate looseness and prevent parts from shifting or rattling during use.

• Fastens brackets, trim, rails, bins, or handles to the cabinet or door
• Restores a secure fit when the original screw is lost, damaged, or rusted
• Helps correct looseness, vibration, and rattling from unsecured parts
• Common symptoms: loose or wobbling handle/trim, misaligned parts, missing hardware

• Disconnect power to the appliance before servicing; turn off water if working near dispenser/ice areas
• Match to the original hardware and install in the same location; reuse any washers/spacers
• Start threads by hand to prevent cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic

This replacement door bin restores secure, organized storage on your refrigerator door, keeping bottles and condiments in place and easy to reach. It's a direct swap for a damaged or missing bin to keep items from tipping or falling.

• Mounts on the inner door as a shelf-style bin to hold jars, bottles, and small items
• Helps organize contents and maximize usable door space
• Replace if cracked, chipped, or the retaining tabs are broken
• Common symptoms: bin falls off, won't stay seated, or the original is missing

• Empty the old bin and lift straight up to release from the door tabs/rails
• Align the new bin with the slots/rails and press down until fully seated
• Do not force cold plastic; let it warm to room temperature to reduce cracking risk
• Avoid overloading the bin after installation

This bearing supports a rotating shaft within the appliance assembly, reducing friction for smooth, quiet operation. Replace a worn bearing to address grinding noise, wobble, or binding and to protect related components.

• Provides low-friction support for a rotating shaft or hub inside the assembly
• Helps maintain alignment for smooth, consistent rotation
• Reduces noise and wear from metal-on-metal contact
• Common failure signs: grinding/squealing, rough rotation, excess play/wobble, or intermittent binding

• Disconnect power; shut off water or gas before servicing
• Note orientation and any spacers/clips during disassembly to ensure correct reassembly
• Clean the shaft and housing; inspect mating parts and replace if worn or damaged
• Seat the bearing squarely using gentle, even pressure to avoid deforming the housing or shaft

This replacement hinge assembly supports and pivots the appliance door, helping it open and close smoothly while staying properly aligned. A worn hinge can cause sagging and poor closure that affects performance and sealing.

• Provides the pivot point and structural support for the door or lid
• Helps maintain correct alignment for reliable latching and sealing
• Replaces bent, worn, or broken hinge components
• Common symptoms: door sags, rubs or binds; difficulty closing; visible hinge damage; uneven gaps

• Disconnect power at the breaker; if applicable, shut off gas before servicing
• Support the door, remove mounting screws, and note hinge orientation/shim placement
• Transfer any screws, spacers, or covers from the old hinge to the new one
• Reinstall and check alignment so the door closes flush and seals correctly