Ffmv062lqa Parts

This replacement capacitor restores reliable starting power to a refrigerator's compressor and fans, helping the appliance reach and maintain proper cooling. Use it to address start-up failures and intermittent cooling issues. What it does:

• Provides the electrical boost needed for compressor and fan motors to start reliably.
• Stabilizes motor operation during run cycles to prevent frequent cycling or poor cooling.
• Common symptoms of a failing capacitor: compressor humming without starting, fridge not cooling, or intermittent compressor operation.
• Designed to match the original part's function for proper motor start and run performance.

• Always disconnect power to the appliance before testing or replacing the capacitor.
• Capacitors can hold a charge; discharge safely.
• Verify replacement matches the original capacitor's ratings and mounting style before installation.

This replacement vent covers the appliance's vent opening and directs airflow out of the cabinet. Replace a broken, loose, or missing vent to restore proper ventilation and maintain a clean, finished appearance.

• Channels exhaust air to help release heat and moisture from the unit
• Shields internal components from debris while allowing proper airflow
• Helps reduce rattling or vibration when secured correctly
• Common signs: cracked or missing louvers, loose fit, noise, or poor ventilation

• Disconnect power and allow the appliance to cool before servicing
• Remove screws or clips securing the old vent; retain hardware for reuse
• Align the new vent and secure without overtightening to prevent damage
• Restore power and verify proper airflow

The Lamp is an original and genuine OEM replacement part for Frigidaire microwaves. It is located inside the microwave and provides light to easily see food and monitor cooking progress.

Causes of a bad lamp can be natural bulb burnout over time, damage from foods accidentally jostling the lamp during cooking, or general wear and tear.

Symptoms of a bad lamp include:

• Dimming or flickering light inside the microwave when in use
• No light turning on when the microwave is powered on
• Broken or cracked bulb housing

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Thermostat is an OEM part for Frigidaire microwaves. Situated near the top of the microwave cavity, it accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

The fuse is a protective link in the appliance's power circuit. When excessive current or a short is detected, it opens the circuit to help safeguard wiring and electronics. A blown fuse often leaves the unit completely unresponsive.

• Interrupts power during an overcurrent or short to prevent further damage
• Helps protect control boards, motors, and wiring
• Typical symptoms: no power, blank display/controls, won't start
• Tests open (no continuity) when blown

• Disconnect power at the breaker or unplug before servicing
• Replace only with the same type and rating specified by the manufacturer
• If a new fuse blows again, locate and correct the underlying short or failed component before further use
• For microwave repairs, high-voltage capacitors can retain a dangerous charge.

This infinite switch controls the heat level for an electric cooktop surface burner, restoring adjustable power to the element for even cooking and reliable temperature selection. What it does:

• Regulates electrical power to a single surface heating element so you can set low-to-high heat.
• Provides stepped "infinite" control positions rather than a simple on/off.
• Replaces a worn or failed control that causes a burner to not heat, stay stuck on one setting, or heat inconsistently.
• Uses standard spade-terminal connections found on many electric ranges.

• Disconnect power at the breaker before servicing—this part services live-voltage circuits.
• Access typically requires removing the cooktop or rear console; handle ceramic glass cooktops carefully to avoid cracking.
• Confirm terminal layout and mounting orientation before removal; take a photo of wiring for reassembly.

The Door Handle is an OEM part for Frigidaire microwaves. It is responsible for providing access in opening and closing the microwave door.

A bad microwave door handle can be caused by everyday use, accidental damage, or wear and tear. Signs of a faulty handle include a loose or wobbly grip, a cracked or broken handle, or difficulty in opening or closing the microwave door.

Symptoms of a bad microwave door handle can include:

• The handle feeling loose or unstable 
• Visible damage to the handle
• The microwave door not opening or closing

Replace your worn-out or damaged microwave door handle with this genuine OEM part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This electronic control board replaces the refrigerator's main circuit board to restore control of functions and display operation. It manages timed cycles and user inputs so the appliance responds correctly to settings. What it does

• Receives signals from the user interface and sends commands to components.
• Controls defrost and cooling cycles; failures can cause display errors or unresponsive controls.
• Common symptoms: unlit or flashing display, buttons that don't work, erratic cooling or defrost behavior.
• Replacing the board often resolves control-related faults when wiring and sensors are otherwise good.

• One electronic control board.

• Always disconnect power before servicing to avoid shock or shorting the board.
• Handle the board by edges and avoid static discharge; ground yourself or use an ESD strap.
• Verify connectors and wiring harness seating before and after installation; do not force connectors.
• If problems persist after replacement, check related sensors, harnesses, and fuses — the board only controls signals it receives.

The Thermostat is an OEM part for Frigidaire microwaves. The thermostat accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

This thermostat is the refrigerator temperature control that senses cabinet temperature and cycles cooling to help maintain set temperatures. It replaces a failed control to restore reliable temperature regulation. What it does:

• Senses refrigerator temperature and opens/closes the cooling circuit to maintain the set temperature
• Stops continuous compressor run when the cabinet reaches the set point
• Can cause warm or fluctuating temperatures, or a compressor that won't cycle when faulty
• Works with the control knob/selector to adjust interior temperature

• One thermostat

• Disconnect power before attempting service to avoid shock or compressor damage
• Handle the sensing bulb/capillary gently; avoid kinks or sharp bends
• Installation usually requires access to the control housing inside the cabinet and basic hand tools

This mounting plate secures internal components to the appliance chassis, restoring proper support and alignment for reliable operation. It's a simple replacement that helps stop rattling and keeps parts positioned correctly. What it does:

• Provides a stable mounting surface for internal parts and assemblies
• Restores correct alignment to reduce vibration and noise
• Prevents components from shifting or contacting other parts
• Supports safe, continued operation by keeping parts secured

• Disconnect power to the appliance before beginning any repair
• This is a mechanical replacement; basic hand tools are typically required
• Handle edges carefully; metal parts can be sharp
• Verify part fit and orientation against the existing piece before final fastening

The Control is an OEM part for Frigidaire microwaves. It serves as the main control of the microwave, controlling and coordinating the various functions and settings.

A bad microwave control board can be caused by electrical issues, component failure, or power surges. Signs of a faulty control board include unresponsive buttons, display errors, or the microwave not functioning properly.

Symptoms of a bad microwave control board can include:

• Unresponsive buttons 
• Erratic display or error messages
• Inconsistent heating 
• Not starting or running  

Replace your microwave control board with this genuine OEM part to restore control over your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This electronic control assembly manages oven functions, timing and user interface so your range responds correctly to temperature and timer settings. Replaces a failed or unresponsive control to restore normal oven operation. What it does:

• Houses the oven's main control electronics and clock/timer functions
• Processes user inputs from the touchpad/controls and runs selected bake/broil cycles
• Enables temperature control and cycle timing for consistent cooking
• Commonly used when the oven won't heat, display is blank or erratic, or controls don't respond

• Disconnect power at the breaker before accessing or replacing the control
• Handle the control and display gently to avoid damage to the glass/display and ribbon connectors
• Keep mounting hardware and connectors oriented for correct reassembly; verify all wire connections are secure

This evaporator fan motor circulates cold air across the freezer evaporator and through the fridge, helping maintain even temperatures and proper cooling. Replaces a failed fan motor to restore airflow and reduce frost buildup. What it does:

• Spins the evaporator fan blade that moves cold air through the freezer and fresh-food compartments
• Restores airflow when the fan has stopped running or runs intermittently
• Helps prevent uneven cooling and excessive frost on the evaporator coil
• Can reduce unusual noise if the old motor is noisy or worn

• Disconnect power to the appliance before starting any repair
• Access typically requires removing interior freezer panels or back panels; use proper tools and keep fasteners organized
• Handle sharp sheet metal and insulated components carefully; wear gloves and eye protection

This diode is an electrical rectifier used on refrigerators to allow current flow in one direction and protect circuits from backfeed. Replacing a faulty diode restores proper circuit behavior and helps the appliance run reliably. What it does:

• Allows current to flow in a single direction to protect control and relay circuits
• Prevents backfeed that can damage electronic components
• Can be linked to intermittent operation, failure to start, or control-board-related faults
• Used wherever a single-direction current path or transient protection is required

• High-level replacement; disconnect power at the breaker or unplug the appliance before starting
• Confirm orientation/polarity matches the original during installation
• Use appropriate tools; avoid shorting leads or touching circuit traces

This is a stamped metal mounting bracket that secures internal components to the appliance frame, restoring proper alignment and support for affected assemblies. Replace a damaged or missing bracket to stop movement and maintain structural fit. What it does:

• Secures internal panels or assemblies to the cabinet to prevent shifting or vibration
• Restores correct alignment for attached components, helping reduce rattling or misfit
• Maintains stable mounting for controls, trim, or wiring harnesses that rely on frame attachment
• Works where a bent, cracked, or missing bracket causes loose parts or improper clearances

• Typical install requires basic hand tools; disconnect power before starting
• Inspect surrounding fasteners and mating surfaces; replace any damaged screws or clips
• Reinstall carefully to avoid bending the bracket; verify secure fit and component alignment