Ffre 12L351 Parts

This air filter features a durable plastic frame and screens airborne particles from intake air to help protect internal components. Replacing a cracked or heavily clogged filter helps maintain proper airflow and keep the appliance running efficiently. What it does

• Captures dust and lint from incoming air to reduce buildup inside the unit
• Helps maintain airflow and overall system efficiency
• Replaces a missing, damaged, or saturated filter
• Common symptoms: weak airflow, longer run times, visible dirt buildup or damage to the filter

• 1 air filter with plastic frame

• Disconnect power to the appliance before servicing
• Open the front grille or filter access panel per your owner's manual
• Slide out the old filter and insert the new filter in the same orientation
• Ensure the filter is fully seated; do not operate the unit without a filter

This handheld remote control lets you operate compatible Frigidaire appliances from a distance, restoring convenient control of modes, temperatures, and timers without touching the main unit. What it does:

• Sends remote commands to the appliance so you can change modes, fan speed, temperature, or timers from across the room
• Replaces a lost, cracked, or unresponsive remote to regain full remote functionality
• Helps when the appliance doesn't respond to the existing remote or when buttons stick or fail
• Uses standard battery power

• One handheld remote control

• Insert fresh batteries and aim the remote at the appliance's IR receiver; check batteries first when troubleshooting
• Re-pairing or simple setup may be required per the appliance owner's manual—follow OEM instructions if prompted
• Keep remote dry and avoid dropping; remove batteries if storing long-term
• Recycle or dispose of old batteries and electronics according to local regulations

This window filler kit replaces the trim piece that fills the gap around an oven door/window, restoring a clean finished appearance and helping reduce heat and steam escape. Ideal for worn, damaged, or missing filler trim. What it does:

• Replaces missing or damaged filler trim around the oven door/window to restore a flush appearance
• Helps limit heat and steam escaping from the door area
• Reduces rattling or light movement caused by degraded or loose trim
• Improves the sealed look and protects underlying edges from wear

• Designed for simple replacement; remove the door trim or access panel per your model's service instructions
• Use basic hand tools; avoid forcing parts to prevent damage to the door assembly
• Follow manufacturer service manual for proper disassembly/reassembly and torque specs
• Disconnect power to the appliance before starting work and wear gloves to protect hands from sharp edges

Handheld remote control that restores convenient, wireless operation of your Frigidaire appliance. Use it to send commands for functions, settings and timers when the original remote is lost or no longer responding. What it does:

• Sends infrared/remote commands to the appliance so you can change settings from a distance.
• Lets you start, stop or adjust modes and timers without using the appliance control panel.
• Replaces a lost, cracked or unresponsive original remote to restore remote operation.
• Requires pairing/programming with the appliance per the owner's manual.

• Remove power or unplug the appliance before accessing internal components; handle electronics carefully.
• Use fresh batteries and insert them following polarity markings; follow local rules for battery disposal.

This replacement remote control restores convenient handheld operation of your appliance, letting you change settings and control basic functions from a short distance without opening the unit. Easy swap for a failed or missing remote. What it does:

• Sends control commands to the appliance so you can change modes, power, and settings remotely
• Restores normal remote response when the original remote is lost, damaged, or unresponsive
• Helps diagnose whether issues are remote-related versus appliance-related by verifying signal/send function
• Works only with compatible appliance models that use this OEM remote protocol

• Insert fresh batteries and test remote operation before installation
• Follow the appliance manufacturer's pairing or setup procedure if required
• If remote still does not operate the appliance, check battery orientation and replace batteries, then refer to the appliance's user manual
• Dispose of used batteries properly and avoid exposing the remote to moisture or extreme heat

This temperature sensor (thermistor) monitors fresh food/freezer temperatures and sends readings to the refrigerator control board so the appliance maintains consistent cooling. Replaces a failed or intermittent sensor to restore accurate temperature control. What it does:

• Senses interior temperature and reports it to the control board
• Helps the compressor, fans and defrost system run at the correct times
• Common symptom: fridge or freezer temperatures are too warm or fluctuate
• Common symptom: unit runs constantly or cycles erratically
• Common symptom: inconsistent cooling between compartments

• One temperature sensor (thermistor)

• Disconnect power to the appliance before attempting any repairs
• Handle the sensor and wiring gently; avoid kinking or stretching the lead
• Verify connector pins align and seat fully; some models use a simple plug-in connector

This replacement filter fits select appliances and performs the model-specific filtration that protects internal components and maintains performance. Replace a damaged, missing, or clogged filter to help keep your unit operating as designed.

• Performs the filtration function specified for your model
• Helps maintain proper airflow or fluid circulation
• Protects internal components from debris and premature wear
• Common signs it's due: visible damage or clogging, reduced performance, unusual noises, or recurring errors

• Disconnect power before servicing; shut off water supply if applicable
• Access and replace the filter per your model's service or user manual; note orientation and any seals
• Wear cut-resistant gloves; internal panels may have sharp edges

This window filler kit is a trim piece used to neatly close the gap between an appliance opening and surrounding cabinetry or window framing, improving appearance and helping keep dirt and debris out of the space. What it does:

• Covers and conceals gaps where an appliance meets a cabinet or opening for a finished look
• Helps prevent dust, crumbs and small debris from collecting in the gap
• Reduces visible light or drafts coming through a narrow opening
• Restores worn or missing trim to return the installation to original fit and finish

• One window filler kit (trim piece)

• High-level, user-friendly install: remove old trim, align new filler, and secure per factory method (snap-in or screw-on)
• Keep hardware provided with the kit; do not force or modify trim to avoid damage
• If installation requires moving an appliance, follow appliance-specific safety steps (disconnect power and/or gas as applicable) before beginning

This window kit replaces a damaged or cloudy appliance door window to restore clear viewing and protect internal components. It provides a finished appearance and helps maintain the door seal and insulation. What it does:

• Replaces cracked, scratched, or cloudy door window to improve visibility into the appliance
• Protects internal components from debris and moisture
• Restores a secure fit and helps maintain normal door function
• Helps reduce drafts and heat transfer around the door opening

• Disconnect power to the appliance before starting any repair
• Handle glass parts carefully and wear cut-resistant gloves and eye protection
• Follow the appliance service manual for disassembly/reassembly steps and torque specs
• If the door has clips or trim pieces, retain hardware and install components in the original orientation

This screw kit contains assorted screws and fasteners commonly used to secure panels and components on compatible Frigidaire appliances, helping restore proper fit and reduce rattling or loose parts. What it does:

• Replaces missing or damaged screws and fasteners that hold panels, brackets, or trim in place
• Restores secure mounting to reduce vibration, rattling, or loosely seated components
• Helps complete repairs that require multiple small fasteners without sourcing each screw separately
• Useful for appliance service, reassembly after maintenance, or replacing corroded hardware

• Use the correct screw from the kit for each location; overtightening can strip threads or crack plastic
• Disconnect power and gas before servicing the appliance
• Keep small parts away from children and pets; wear eye protection when working with trim and hardware

This handheld remote control lets you operate your appliance from across the room for convenient on/off, mode and setting changes without touching the main unit. Ideal when the original remote is lost, damaged, or unresponsive. What it does:

• Sends wireless commands to the appliance to change power, mode, temperature or fan settings
• Restores remote control operation when the original remote no longer responds
• Works by pointing at the appliance's IR receiver — simple line-of-sight control
• Eliminates the need to use onboard controls for routine adjustments

• Install fresh batteries (check polarity) before initial use
• Aim the remote at the appliance's infrared receiver and press a button to verify operation
• If the appliance does not respond, check batteries, clear obstacles, and ensure the appliance has power
• Recycle the old remote and batteries according to local regulations