Ffs2614qp2a Parts

This tube connector is a small water-line fitting that joins refrigerator water and ice-maker tubing, restoring a secure path for water flow. It helps stop leaks and regain consistent water delivery to the dispenser or icemaker. What it does:

• Joins two sections of refrigerator water tubing to maintain a watertight connection
• Stops leaks at a damaged or worn tube joint
• Restores water flow to the ice maker or dispenser when a broken connector is the cause
• Compatible with rigid and soft tubing in typical refrigerator plumbing layouts

• One tube connector

• Shut off the refrigerator water supply before servicing
• Inspect tubing ends and replace damaged tubing or seals as needed
• Use proper fittings and tighten to manufacturer torque; avoid over-tightening

This lower-front kickplate grille replaces a damaged or missing refrigerator lower trim to restore appearance and protect the area beneath the doors. It keeps the front of the appliance looking finished while allowing airflow where designed. What it does:

• Replaces a cracked, broken, loose, or missing lower kickplate to improve cabinet appearance
• Covers the exposed lower cabinet opening and protects internal components from accidental contact
• Maintains designed airflow/venting at the refrigerator base (where applicable)
• Provides a secure fit to reduce rattles or gaps at the bottom front

• One lower kickplate grille (single piece as listed)

• High-level replacement: usually secures with clips and/or screws along the cabinet base—remove the old grille and snap or fasten the new one in place
• Keep power off and remove any loose debris from the area before beginning work
• Inspect mounting tabs and screws for damage; replace hardware if worn to ensure a secure fit

This switch kit is an electrical switch assembly used to restore reliable control of affected appliance functions. It replaces a worn or failed switch so the unit responds correctly to user inputs and power commands. What it does:

• Replaces a faulty or unresponsive control switch that can prevent operation or cause intermittent power/command issues
• Restores proper opening/closing or on/off signaling for the associated control circuit
• Helps eliminate symptoms like no response to button presses, intermittent operation, or a stuck switch
• Matches OEM fit and mounting points for a direct replacement when the original switch has failed

• One switch kit assembly

• Turn off and unplug the appliance or disconnect power at the breaker before beginning work
• Follow the appliance manufacturer's disassembly steps to access the switch; avoid damaging nearby wiring or components
• Verify electrical connections are secure and oriented as original; test function before fully reassembling

This snap-in bushing provides a low-profile bearing surface to support rotating shafts and reduce wear and noise in appliance assemblies. It restores smooth operation where the original bushing is worn or damaged. What it does:

• Provides a replaceable bearing/sleeve for rotating shafts and posts
• Reduces friction and wear on housing and moving parts
• Helps eliminate rubbing, grinding, or rattling noises during operation
• Maintains correct shaft alignment for smooth rotation

• One snap-in bushing

• Disconnect power before servicing and follow all safety instructions
• Access may require removing panels or covers; inspect surrounding parts for wear
• Press or snap the bushing squarely into the housing until fully seated; avoid deforming it
• Replace any damaged retainers or seals and test operation after reassembly

This insulator is a small foam/trim piece that cushions and thermally isolates appliance panels to help maintain proper airflow and reduce vibration. It preserves fit between cabinet components for quiet, efficient operation. What it does:

• Cushions panels and components to reduce rattling or vibration noise
• Creates a thermal barrier that helps limit heat transfer between parts
• Keeps panels aligned and spaced to prevent rubbing or abrasion
• Worn or missing insulators can cause noise, vibration, or poor panel fit

• One insulator as shown

• Disconnect power before accessing panels or internal components
• Replace only the worn or damaged insulator; trim or adhesive may be needed to position some styles
• Remove surrounding trim or panels as required to reach the mounting location

This door seal creates a tight closure around the appliance door to help keep cold air in and warm air out, improving cooling performance and reducing energy use. Replace a worn seal to restore a proper door seal. What it does

• Forms a continuous gasket around the door edge to block air leaks.
• Helps prevent frost build-up and loss of cooling inside the compartment.
• Can reduce cycling and strain on the compressor when the seal is intact.
• Common symptom: noticeable cold-air leakage, frost near the door, or uneven cooling.

• High-level task; remove the old seal by pulling out the retainer and fit the new seal into the door channel.
• Warm the gasket slightly to help seat it evenly; avoid open flames or excessive heat.
• Inspect door frame and retainer for damage before installing the new seal.

A replacement sliding basket that restores smooth, stable drawer movement in refrigerator or freezer compartments so stored items slide out easily for access. Replaces a worn or damaged basket assembly to keep storage organized. What it does:

• Provides a rolling/sliding drawer surface so you can pull stored items out without tipping or spilling
• Restores proper track engagement when original basket binds, jams, or comes off the rails
• Helps stop excessive wobble, scraping, or uneven travel caused by worn parts
• Supports normal item storage and retrieval without altering fridge function

• High-level replacement: remove contents and existing basket, align onto tracks, and slide into place until it clicks/locks
• Use basic hand tools only; do not force parts—inspect tracks and rollers for damage before installing
• Disconnect power only if service requires working near electrical components; otherwise power-down not typically required for interior basket swaps
• If any mounting hardware or clips are missing/damaged, replace them to ensure secure operation