Ffss2315td2 Parts

This stop-rotation is the small mechanical stop that prevents uncontrolled rotation of the appliance component, helping parts engage and align correctly for reliable operation. It replaces a worn or broken rotation stop to restore normal movement control. What it does:

• Acts as a physical stop to limit and locate rotation of the linked component
• Keeps assemblies aligned so gears, pulleys, or drums engage properly
• Can resolve symptoms such as loose or misaligned rotation, intermittent engagement, or abnormal movement
• Small, low-profile part used where precise rotation limits are required

• Disconnect power (and water if applicable) before servicing the appliance
• Access may require removing panels or covers; keep fasteners organized
• Inspect mating parts (brackets, shafts, clips) and replace if damaged

The Shelf is an OEM replacement part for Frigidaire refrigerators. It provides flexible storage and organization for items inside the refrigerator. Shelves are essential for maximizing interior capacity and accommodating groceries of various heights and sizes.

Causes of a bad shelf can include wear and tear over time, damage from excessive weight, or accidental breakage. Handles might loosen or cracks could develop in the surface.

Symptoms of a bad shelf include:

• Sagging or uneven surfaces that cannot support stored items properly
• Shelf handles detaching from mounting holes 
• Cracks or breaks reducing the shelf's integrity

This shelf is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This refrigerator pan cover insert sits in the frame above a storage drawer to create a flat, sturdy shelf surface. Replace a cracked, missing, or loose insert to restore support and help drawers slide and seal properly. What it does:

• Fits into the pan cover frame to form a flat surface above the drawer
• Supports food items while covering the drawer below
• Helps contain spills and prevents items from falling into the drawer
• Common symptoms: cracked/broken insert, sagging shelf, spills leaking into drawer, drawer catching

• 1 pan cover insert

• Remove food, slide out the drawer, and lift out the cover/frame for access
• If working near lights or controls, disconnect power; wear cut-resistant gloves when handling edges
• Clean the frame channels and align the insert with orientation tabs/grooves
• Lower the insert gently and ensure it sits flush—do not force into place

Access door provides a finished cover for the appliance's service opening, protecting internal components from dust and damage while keeping the unit looking tidy and allowing access for maintenance and repairs. What it does:

• Covers the service or access opening and protects wiring, valves, and other internal parts.
• Allows access to controls, connections, or components for inspection and repair without removing major panels.
• Helps prevent debris, pets, or fingers from contacting internal parts.
• Replace a missing, cracked, or damaged access door to restore appearance and reduce exposure of internal components.

• Always disconnect power (and gas for gas appliances) before removing panels or working on the appliance.
• Handle the door and surrounding edges carefully to avoid cuts; keep original fasteners and reuse if undamaged.
• Align tabs/clips and secure with manufacturer screws; do not overtighten.

This refrigerator kickplate grille mounts across the lower front of the cabinet to cover the machine compartment while allowing proper airflow. Replacing a broken or missing grille restores a clean finish and helps keep debris away from internal components.

• Covers the lower opening and helps shield the condenser area from bumps and debris
• Helps direct air through the base for proper ventilation
• Restores a clean, finished appearance across the bottom front
• Typical symptoms: cracked or scuffed grille, broken mounting tabs, loose or won't stay attached, missing

• Disconnect power and wear work gloves to avoid sharp edges
• Open doors; on many models, pull the grille straight out to release spring clips. If screws are used, remove them from the base rail
• Align tabs/clips and snap or fasten the grille into place
• The grille is secure and clear of door swing and air inlets

This shroud assembly covers and channels airflow around the evaporator to help protect internal components and promote even cooling. It restores proper airflow pathways after damage or during evaporator repairs. What it does:

• Protects evaporator and nearby components from debris and contact
• Directs airflow over the evaporator for consistent cooling performance
• Helps reduce localized frost buildup when used with a functioning defrost system
• Commonly replaced if cracked, broken mounting tabs, or interfering with the fan

• One shroud assembly as shown

• Disconnect power before servicing; work only with the appliance unplugged or breaker off
• Removal typically requires accessing the evaporator compartment and removing panels; keep fasteners organized
• Handle plastic parts carefully to avoid cracking mounting tabs during installation

The Dispenser Facade is an OEM part for Frigidaire refrigerators. It forms the decorative facing around the ice and water dispenser area located externally on the door. Besides providing an aesthetic covering, the facade also protects internal components from accidental damage.

Causes of a bad dispenser facade can include scratches, cracks or discoloration from normal opening and closing of the refrigerator door over many years of usage.

Symptoms of a bad dispenser facade include:

• Worn, faded or damaged external appearance
• Exposed internal dispenser parts that could be at risk for impact damage

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models. 

This evaporator cover mounting bracket secures the evaporator cover inside the freezer compartment to keep cooling airflow and components in place. Durable metal construction replaces a broken or bent bracket to restore proper cover alignment. What it does:

• Holds the evaporator cover in position for correct airflow and protection of the evaporator coil
• Helps stop rattling or loose cover movement that can cause noise
• Restores a secure mounting point after impact or corrosion damage
• Works with the evaporator cover assembly to maintain consistent cooling performance

• High-level replacement: remove the evaporator cover to access mounting points; fasten bracket with existing screws
• Use basic hand tools; keep screws and clips organized for reassembly
• Disconnect power to the appliance before starting any repair to avoid electrical hazard

This replacement fan shroud screw secures the evaporator/condenser fan shroud to the appliance, helping keep the fan assembly stable for proper airflow and quiet operation. Use it to replace stripped or missing mounting hardware. What it does:

• Secures the fan shroud or mounting bracket to the appliance cabinet or fan assembly
• Helps prevent fan wobble, rubbing, and airflow disruption caused by a loose shroud
• Restores proper clearance between fan blades and shroud to reduce noise and wear

• High-level replacement—remove power to the appliance before starting work
• Use appropriate-size driver to avoid stripping the screw head
• Inspect surrounding hardware and shroud for damage; replace any damaged parts before reassembly

This spring solenoid is the actuator spring assembly that helps move and return a solenoid-driven mechanism, restoring reliable part movement and engagement in affected appliance systems. What it does:

• Provides return tension and controlled movement for a solenoid actuator
• Helps the solenoid plunger snap back after activation so linked components reset
• Commonly replaced when the actuator fails to move, sticks, or does not fully return
• Corrects symptoms such as intermittent engagement, sticking, or loss of actuator motion

• Disconnect power to the appliance before attempting service to avoid shock or injury
• Handle small components carefully; keep track of retaining clips, pins, or fasteners
• Replace with the exact part number to ensure fit and function
• Refer to OEM instructions for step-by-step removal and reassembly