Fftr1836vw Parts

This drain tube routes defrost and condensation water from the freezer compartment to the drain pan so moisture drains away cleanly and prevents pooling. Replaces a cracked, clogged or disconnected drain line. What it does:

• Channels defrost and condensation water out of the freezer to the drain system
• Prevents water pooling inside the freezer or refrigerator compartment
• Helps avoid leaks onto the floor when the original tube is cracked, pinched or disconnected
• Works with the appliance's drain trough and drain pan to maintain normal defrost drainage

• One drain tube

• Disconnect power before servicing and work with a cooled appliance to avoid burns
• Access may require removing interior panels or kickplate; handle panels and clips carefully
• Inspect and clear any debris or ice from the drain trough before installing the new tube
• Ensure the tube is routed without sharp bends or kinks and is securely seated at both ends

This heat exchanger suction line kit replaces a damaged or corroded suction line assembly to restore proper refrigerant flow and heat transfer in the cooling system. It helps maintain consistent compartment temperatures and system efficiency. What it does:

• Transfers heat from the refrigerant suction line so the compressor and evaporator operate correctly
• Replaces cracked, kinked, or corroded tubing that can cause refrigerant loss or reduced cooling
• Helps address symptoms such as warm or inconsistent temperatures, visible oil or residue at fittings, or abnormal frost/ice patterns
• Restores a sealed refrigerant path after tubing damage or when corrosion has compromised the line

• Intended for qualified service technicians only; system access requires certified refrigerant handling
• Disconnect power to the appliance before servicing and follow all safety precautions
• Installation may require brazing, flare fittings, or specialty tools; verify leak-tight connections and pressure-test per OEM procedures
• Evacuate and recharge the refrigerant system to OEM specifications after installation

This evaporator fan motor with harness circulates cold air across the evaporator coil so your refrigerator cools evenly. Replaces a worn or noisy motor to restore airflow and help maintain proper temperature distribution. What it does:

• Spins the evaporator fan blade to move cold air through the freezer and fresh-food compartments.
• Restores airflow when the original motor is noisy, slow to start, or has failed.
• Helps prevent frost buildup by ensuring steady air circulation across the coil.
• Compatible with systems that use a motor-and-wiring-harness assembly for the evaporator fan circuit.

• Disconnect power to the appliance before beginning any repair to avoid electrical shock.
• Handle the motor and harness gently; avoid pinching or stretching wires during installation.
• Verify fan blade clearance and secure mounting to prevent vibration or rubbing.

This replacement pan collects condensate and drips to keep the appliance base dry and prevent water damage. It fits into the designated tray area and restores proper drainage for reliable operation. What it does:

• Catches defrost or condensation runoff to prevent puddling under the appliance
• Guides water toward the drain/evaporation area so the appliance can manage moisture
• Helps reduce musty smells and corrosion caused by standing water
• Works as the proper receptacle when the original pan is cracked, warped, or missing

• One replacement pan

• Disconnect power (or unplug) and remove access panels before installing
• Remove old pan carefully—dispose of any standing water and clean the area before installing the new pan
• Seat the pan fully in its mounting location so drains align; avoid forcing parts into place
• If you encounter damaged clips, screws, or surrounding components, replace or repair those items before use

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fastening so parts stay aligned and reduces rattling or looseness during operation. What it does:

• Fastens trim, panels or internal components to keep parts securely in place
• Restores proper alignment and prevents gaps that can cause vibration or noise
• Used where original factory screws have become stripped, lost, or damaged
• Matches the factory fit for a reliable, long-lasting hold

• One mounting screw

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can damage threads or plastic parts
• Disconnect power and follow appliance safety guidelines before servicing
• Compare head style and thread before installation

This condenser coil assembly removes heat from the refrigerator's refrigerant so the appliance can cool properly. Replacing a damaged condenser helps restore efficient cooling and reduces compressor run time. What it does:

• Condenses refrigerant from a gas to a liquid so the cooling cycle can continue
• Supports proper heat rejection from the cooling system
• A faulty or clogged condenser can cause poor cooling, long run cycles, or a hot cabinet exterior
• Works with the condenser fan and compressor as part of the fridge's refrigeration system

• Disconnect power to the appliance before starting any service
• Work on a stable surface; condenser edges may be sharp—wear gloves and eye protection
• Inspect and clean the condenser area and condenser fan while replacing the part

This replacement light socket secures the refrigerator/freezer lamp and provides the electrical connection needed for the interior light to operate. It restores a reliable bulb connection so the interior light turns on when the door opens. What it does:

• Holds and connects the interior lamp/bulb to the appliance wiring
• Replaces a cracked, corroded, or loose socket that causes intermittent or no light
• Helps eliminate flickering, a loose bulb, or a socket that won't accept a bulb
• Works with compatible appliance wiring and standard appliance light bulbs

• One light socket

• Disconnect power to the appliance before servicing to avoid shock
• Remove the old socket and unplug or disconnect wires, then attach the replacement per OEM wiring orientation
• Inspect bulb and wiring; replace the bulb if damaged and secure wiring connectors

This half-width deli drawer fits the fresh food compartment and restores proper fit and smooth sliding when the original is cracked or missing. It keeps meats, cheeses, and snacks organized and helps contain small spills.

• Holds and organizes deli items in the refrigerator's fresh food section
• Slides on existing rails beneath the shelf frame to store items and contain drips
• Replace if the original bin is cracked, warped, discolored, falls off the rails, or won't slide smoothly
• Restores original storage capacity and proper drawer alignment

• Remove contents and pull the old drawer straight out past the stops
• Align the new drawer with both rails and slide in until fully seated
• Allow plastic to warm to room temperature before installation; handle gently to avoid stress cracks
• Reinstall any existing lid/cover and ensure shelf frame and rails are undamaged and properly seated

The Capacitor is an OEM part for Frigidaire refrigerators. As an electrical component, it works behind the scenes to help power the compressor and ensure smooth, reliable refrigeration. Proper capacitor functioning is vital for starting and running the compressor motor efficiently.

Symptoms of a faulty capacitor can include:

• Inconsistent cooling power with temperature fluctuations  
• The refrigerator fails to start or cycles on and off frequently
• Buzzing or humming sounds coming from inside walls
• Cases of warm food due to inadequate freezing and cooling abilities

Potential causes involve natural breakdown over many compressor start-up cycles accumulated over 10+ years. Damage from power surges is also possible. 

Replace it with this genuine Frigidaire part to restore durable electrical support for the component operation. It prevents further wear and unnecessary service calls. Compatible with some Electrolux, KitchenAid, and Kenmore models that use Frigidaire components. 
 

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

This factory screw secures interior or door components in your refrigerator so they stay tight and aligned. Replace missing, stripped, or corroded hardware to eliminate looseness and prevent parts from shifting or rattling during use.

• Fastens brackets, trim, rails, bins, or handles to the cabinet or door
• Restores a secure fit when the original screw is lost, damaged, or rusted
• Helps correct looseness, vibration, and rattling from unsecured parts
• Common symptoms: loose or wobbling handle/trim, misaligned parts, missing hardware

• Disconnect power to the appliance before servicing; turn off water if working near dispenser/ice areas
• Match to the original hardware and install in the same location; reuse any washers/spacers
• Start threads by hand to prevent cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic