Fftr1836vw Parts

This replacement door bin restores secure, organized storage on your refrigerator door, keeping bottles and condiments in place and easy to reach. It's a direct swap for a damaged or missing bin to keep items from tipping or falling.

• Mounts on the inner door as a shelf-style bin to hold jars, bottles, and small items
• Helps organize contents and maximize usable door space
• Replace if cracked, chipped, or the retaining tabs are broken
• Common symptoms: bin falls off, won't stay seated, or the original is missing

• Empty the old bin and lift straight up to release from the door tabs/rails
• Align the new bin with the slots/rails and press down until fully seated
• Do not force cold plastic; let it warm to room temperature to reduce cracking risk
• Avoid overloading the bin after installation

This bearing supports a rotating shaft within the appliance assembly, reducing friction for smooth, quiet operation. Replace a worn bearing to address grinding noise, wobble, or binding and to protect related components.

• Provides low-friction support for a rotating shaft or hub inside the assembly
• Helps maintain alignment for smooth, consistent rotation
• Reduces noise and wear from metal-on-metal contact
• Common failure signs: grinding/squealing, rough rotation, excess play/wobble, or intermittent binding

• Disconnect power; shut off water or gas before servicing
• Note orientation and any spacers/clips during disassembly to ensure correct reassembly
• Clean the shaft and housing; inspect mating parts and replace if worn or damaged
• Seat the bearing squarely using gentle, even pressure to avoid deforming the housing or shaft

This replacement hinge assembly supports and pivots the appliance door, helping it open and close smoothly while staying properly aligned. A worn hinge can cause sagging and poor closure that affects performance and sealing.

• Provides the pivot point and structural support for the door or lid
• Helps maintain correct alignment for reliable latching and sealing
• Replaces bent, worn, or broken hinge components
• Common symptoms: door sags, rubs or binds; difficulty closing; visible hinge damage; uneven gaps

• Disconnect power at the breaker; if applicable, shut off gas before servicing
• Support the door, remove mounting screws, and note hinge orientation/shim placement
• Transfer any screws, spacers, or covers from the old hinge to the new one
• Reinstall and check alignment so the door closes flush and seals correctly

This temperature control thermostat—often called the cold control—regulates your refrigerator's cooling by cycling the compressor based on the dial setting. Replace it to restore consistent temperatures and dependable start/stop operation.

• Senses compartment temperature via a capillary bulb and opens/closes contacts to control the compressor circuit
• Maintains the set temperature range in the fresh food section
• Can help resolve: refrigerator too warm or freezing food, unit runs constantly or won't start, temperatures not responding to knob adjustments
• Restores normal on/off cycling and more stable cooling performance

• Unplug the appliance before servicing
• Remove the control knob and cover to access the thermostat; note wire positions or take a photo before transfer
• Route the capillary sensing tube exactly as original; avoid kinks or sharp bends and secure in the same clips/locations
• After installation, set to a mid-range setting and allow up to 24 hours for temperatures to stabilize

This replacement evaporator shroud directs airflow around the evaporator/fan assembly and protects internal components for more consistent cooling. Installing a sound shroud helps restore even temperatures and reduces frost buildup or fan contact. What it does:

• Directs cooled air from the evaporator for even temperature distribution throughout the compartment
• Shields the evaporator and fan motor from loose items and debris
• Helps reduce frost buildup and airflow obstructions that can cause uneven cooling
• Minimizes fan vibration and contact noise when correctly installed

• Disconnect power to the appliance before starting any repair.
• Remove interior panels, shelves, and any food before accessing the evaporator area.
• Handle edges carefully; plastic panels and sheet-metal openings can be sharp.
• Verify correct orientation and secure with the original fasteners; service diagram if fitment or mounting holes differ.

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

Replacement shroud that covers and protects internal components, restores the appliance's finished appearance, and helps reduce rattling and minor airflow issues caused by a cracked or missing cover. What it does:

• Protects internal wiring, connectors and components from dust, debris and accidental contact.
• Helps keep panels and components in place to reduce vibration and rattling noises.
• Aids basic airflow direction around enclosed parts to support normal cooling/venting.
• Common symptom indicators: cracked or missing cover, visible exposed components, or increased noise.

• Disconnect power to the appliance before beginning any service.
• Remove trim or outer panels and any retaining screws/clips to access the shroud; basic hand tools are usually required.
• Handle edges carefully—metal/plastic edges can be sharp. Preserve original fasteners for reassembly.

This bottom right door hinge assembly restores proper door alignment and smooth pivoting for refrigerators. Replaces a worn or damaged hinge to reduce door sag and help the door close evenly for better sealing and performance. What it does:

• Provides a new bottom pivot point so the refrigerator door opens and closes smoothly
• Corrects door sagging or misalignment that can prevent a tight seal
• Reduces rubbing or binding at the door bottom that can cause uneven wear
• Restores proper door clearance to improve overall cabinet fit and operation

• High-level task: remove and support the door before replacing the bottom hinge; two people may be needed for safe handling
• Use hand tools; avoid forcing components and follow the appliance manufacturer's service instructions
• Wear gloves and eye protection; keep hinges and pins clean and properly seated during reassembly

This replacement cover protects the appliance's control area and internal components from dust, debris, and accidental contact. It restores a finished appearance and helps keep controls and wiring safely enclosed. What it does

• Shields the control board and wiring from spills, dirt, and everyday wear
• Prevents accidental contact with controls or electrical connections
• Helps maintain a secure fit and finished look to the control area
• Common symptom: cracked, warped, or missing cover exposing internal parts

• One replacement cover

• Disconnect power to the appliance before starting any work
• Remove any trim or screws that hold the old cover in place; many covers use clips—lift gently to avoid breaking tabs
• Align tabs or screw holes on the new cover and secure without overtightening