Fg4322es Parts

10 - 16 x 1/2

The rubber foot is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

• Increased vibration or noise during the wash or spin cycle
• The washing machine wobbling or becoming unsteady
• Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order W10176519.

The Thermostat Kit is an OEM part for Frigidaire refrigerators. It regulates interior temperature conditions. The thermostat monitors and controls cooling functions to maintain even temperatures for food storage.  

Causes of a bad thermostat can include a gradual loss of calibration or component failure over many cooling cycles. Temperature swings, increased energy use, and icing/freezing issues may result. Exposure to moisture or humidity could also compromise insulation and wiring.

Symptoms of a faulty thermostat include:  

• Inconsistent or fluctuating interior temperatures
• Difficulty maintaining the temperature setting  
• Frost or ice buildup inside the fridge or freezer
• The compressor running constantly without adequate cooling

This OEM replacement is compatible with Electrolux, Gibson, Kelvinator, and Kenmore brands as well. 

This part is a motor clamp. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, damaged, or broken motor clamp on certain makes of indoor appliance models. Motor clamps are essential for properly securing the drive motor on various types of indoor appliances such as washers, dryers, and refrigerators. Without the use of a motor clamp, the drive motor is free to move around or become detached. This can easily cause serious damage to the equipment and prevent proper functionality. Proper tools are needed to replace this part and appropriate safety measures should be adhered to when working on any type of equipment. For accurate information on how and where to install this replacement motor clamp, specific manufacturer diagrams should be referred to.As an authentic replacement part, this motor clamp can be used on multiple different models of washers, dryers, refrigerators, and washer/dryer combos manufactured by Kenmore, Maytag, Whirlpool, and Amana. Please note that this motor clamp is a genuine part made of high-quality materials and is sold individually.

This thermistor kit replaces the temperature-sensing element that communicates with the control system. Restores accurate temperature readings so your appliance can regulate cooling and defrost cycles and maintain steady, reliable performance. What it does:

• Monitors air or coil temperature and sends signals to the control board
• Helps manage compressor, fan, and defrost heater operation
• Failure can cause temperatures too warm or too cold, extended run time, or short-cycling
• Contribute to frost/ice buildup, poor cooling, or error codes/alarms

• 1 thermistor kit

• Unplug the appliance or disconnect power before servicing
• Access the sensor (commonly in an air channel or clipped to evaporator tubing)
• Match connector orientation and route wiring as original; install the sensor in the same position for accurate readings
• Restore power and allow up to 24 hours for temperatures to stabilize; run diagnostics if available to verify sensor operation

The Electronic Control Board is an OEM part for Frigidaire refrigerators. It is responsible for the main electronic control functions of the refrigerator including monitoring temperatures, operating cooling systems, and controlling user interface features like the display panel. 

Causes of a bad control-electrical can include liquid spills inside the refrigerator that damage circuitry. Over time, electronic components may fail or degrade in performance due to regular wear and use.

Symptoms of a bad Electronic Control Board include:

• Erratic or improper cooling by the refrigerator and freezer compartments  
• Faulty or unresponsive control panels and displays
• Buzzing or clicking noises emanating from the electronic control area
• Complete failure to power on or recognition of controls

This OEM replacement is compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

The PC Board is an OEM part for Frigidaire refrigerators. It serves as the control center of your refrigerator, allowing you to adjust settings, monitor temperatures, and access various functions.

A bad PC board can be caused by electrical issues, component failure, or damage. When the user interface and display board become faulty, it can result in issues such as unresponsive controls, inaccurate temperature readings, or a blank display.

Symptoms of a bad PC include:

• Unresponsive buttons or controls on the refrigerator
• Inaccurate temperature readings or inconsistent display
• Blank or flickering display

Replace your faulty PC board with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

This manifold routes and distributes supply within the appliance to the connected components. Replacing a cracked or leaking manifold restores proper flow and helps maintain safe, reliable operation across the system.

• Channels supply from the inlet to multiple connection points
• Provides threaded ports for model-specific fittings and connections
• Helps maintain consistent flow to downstream components
• Typical failure signs: leaks, visible cracks, stripped threads, or multiple components not receiving supply

• Disconnect power and shut off the appliance's supply before servicing.
• Access and replace the manifold per your model's service instructions; transfer any brackets or fittings from the original as required.
• Use manufacturer-approved sealants only where specified; do not overtighten threaded joints.
• Restore supply and check every connection for leaks before returning the appliance to service.

The Evaporator Fan Blade is an OEM component specifically designed for Frigidaire brand refrigerators. This fan blade is located within the evaporator coil assembly and works to circulate cold air throughout the refrigerator compartment. 

Symptoms of a bad fan blade include: 

• Excessive heat buildup inside refrigerator sections
• Inability to sufficiently cool foods or maintain temperatures  
• Vibration or grinding noises emanating from rear wall
• Complete lack of air circulation felt at vents

Causes for replacement include wear and tear of plastic components over many years of constant spinning motion, cracks, or breakage from foreign object interference.

This genuine OEM Frigidaire part is also compatible with some Kelvinator and Admiral models.

This replacement electrical switch controls power to a specific function in your appliance. By opening or closing the circuit, it lets the selected feature turn on and off reliably when you actuate the control.

• Completes or breaks the circuit to start/stop its assigned component
• Restores responsive on/off or selector operation at the control
• Common failure symptoms: feature won't start or won't shut off, intermittent operation, loose/stuck actuator, or heat discoloration on the old switch
• Used in control, console, or door areas depending on model design

• Disconnect appliance from power before servicing
• Access the switch location per your model; remove knob/panel if applicable
• Photograph wire positions and note terminal labels (COM/NO/NC) if present; transfer wires one at a time to the new switch
• Secure mounting, ensure tight connectors, reassemble, restore power, and test operation

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling

This inverter is the electronic control that powers and regulates the refrigerator's variable-speed compressor. When it fails, the compressor may not run, leading to little or no cooling even though interior lights and fans can still operate.

• Converts household AC to the proper power for the compressor and varies speed per the main control's commands
• Helps maintain stable temperatures during normal operation
• Failure may result in warm sections, compressor not running, or intermittent cooling
• Often suspected when fans run but the compressor stays off and the compressor windings test good

• Disconnect power before servicing; the inverter can retain a charge briefly after unplugging.
• Mount the module securely and ensure all keyed connectors are fully seated; route wires away from hot or moving parts.

The Door Switch is an OEM part for Frigidaire refrigerators. It is a basic on/off switch located inside the refrigerator door frame that controls power to interior lights. 

When the door is opened, the magnet inside activates the switch, illuminating LED lights inside the refrigerator and freezer compartments for convenience. This allows for ease of accessing and identifying items without additional switches.

Causes of a bad door switch can include normal wear over time, moisture exposure, or impact damage.

Symptoms of a bad door switch include:

• Lights not turning on when the door is opened
• Lights remaining on continuously even when the door closed  
• Inability to shut off lights manually 

Replacing the switch with a Frigidaire OEM part ensures the refrigerator's interior lights function properly based on the door position. It also helps optimize energy usage. This replacement is compatible with models by Electrolux, Gibson, Kelvinator, and Kenmore.

This replacement panel restores a clean, finished look and proper coverage on your appliance. It replaces a damaged or missing panel so controls and internal components are properly protected and the exterior looks right again.

• Provides the correct finished surface for the designated area of the appliance
• Helps protect internal components from spills, dirt, and impact
• Resolves issues like missing/loose panel, cracked or dented finish, or gaps in the exterior
• Designed to match the original fit and appearance for the applicable models

• Disconnect power before beginning any repair
• Handle the panel carefully to avoid scratching or bending the finish
• Retain and transfer original screws/clips as needed; install evenly without over-tightening
• Verify alignment and door/console operation after installation