Fg4322es Parts

This inverter is the electronic control that powers and regulates the refrigerator's variable-speed compressor. When it fails, the compressor may not run, leading to little or no cooling even though interior lights and fans can still operate.

• Converts household AC to the proper power for the compressor and varies speed per the main control's commands
• Helps maintain stable temperatures during normal operation
• Failure may result in warm sections, compressor not running, or intermittent cooling
• Often suspected when fans run but the compressor stays off and the compressor windings test good

• Disconnect power before servicing; the inverter can retain a charge briefly after unplugging.
• Mount the module securely and ensure all keyed connectors are fully seated; route wires away from hot or moving parts.

The Water Inlet Valve is an OEM part for Frigidaire refrigerators featuring dispensed water and ice. Located inside the cabinet behind the exterior paneling, the inlet valve controls flow into the water filtration system and ice maker assembly. 

Symptoms of a bad inlet valve include:

• Erratic dispenser water flow rates  
• Ice maker failures or water leaks inside cabinet
• Mineral accumulation inside filter chamber  
• Inability to regulate consistent temperature/pressure

Causes of a bad valve can be worn diaphragms, obstructed ports, or damage from mineral buildup over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This fan motor-and-blade assembly restores airflow in compatible Frigidaire refrigerators and freezers to help maintain even temperatures and reduce warm spots. It replaces a failed fan to improve circulation and appliance performance. What it does:

• Circulates air inside the fresh food and freezer compartments for more even cooling.
• Moves air across cooling components to help prevent localized frost and warm zones.
• Replaces noisy, stalled, or non-spinning fans that cause reduced cooling or unusual sounds.
• Supports proper airflow so the appliance can maintain set temperatures more consistently.

• Disconnect power before starting—unplug the appliance or shut off the circuit breaker.
• Access typically requires removing interior panels or the rear evaporator cover; retain fasteners.
• Handle blades carefully to avoid bending; ensure electrical connectors are fully seated.

The Evaporator Fan Motor is an OEM part for Frigidaire refrigerators. It functions to circulate cold air throughout the refrigerator compartment by drawing air across the evaporator coil. Consistent air circulation helps maintain even temperatures.

Symptoms of a bad evaporator fan motor include inconsistent temperatures inside the refrigerator. Sections may be warmer or colder than expected. Icing or frost patterns could indicate improper air flow as well.  

Causes of a bad evaporator fan motor include:

• Fluctuating temperatures within the refrigerator
• Increased frost or ice buildup  
•  Food not staying chilled as expected  
• Abnormal noises coming from the fan area

This Frigidaire replacement is compatible with some Electrolux, Amana, and Kenmore models too. 

This mullion assembly replaces the vertical center trim between refrigerator doors to restore a finished appearance and help maintain a proper door seal. It's the correct replacement when the center trim is cracked, warped, or missing. What it does:

• Replaces damaged or broken center mullion trim to restore door fit and appearance
• Helps close the gap between doors to support proper gasket sealing and reduce cold-air leakage
• Stops rattling or door misalignment caused by a worn or broken mullion
• Restores the finished look of the door center where the mullion mounts

• Disconnect power to the appliance before starting any repair and remove food from door area as needed
• Remove any screws, clips, or door trim pieces holding the old mullion and carefully detach it before installing the new assembly
• Align new mullion, secure fasteners snugly (avoid overtightening), and confirm doors close and seal correctly

The Fan Assembly is an OEM part for Frigidaire refrigerators. It is a crucial component that circulates cool air throughout the refrigerator, ensuring proper temperature regulation and maintaining food freshness.

A bad fan assembly can be caused by wear and tear, motor failure, or blockage. Signs of a faulty assembly include an increase in temperature inside the refrigerator, unusual noises coming from the fan, or poor cooling performance.

Symptoms of a bad fan assembly can include:

• An increase in temperature 
• Unusual noises coming from the fan 
• Poor airflow and uneven cooling

Replace your damaged or malfunctioning fan assembly with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Handle Screw is an OEM part for Frigidaire refrigerators. It is a fastener or screw used to securely attach the refrigerator door handle. Properly installed handles allow for easy opening and closing of refrigerator doors with minimal effort. 

Causes of a bad Handle Screw include damage or wear over time and corrosion that causes the screw to seize or strip. 

Symptoms of a bad Handle Screw are:

• Loose or wobbly door handles
• Difficulty opening the refrigerator door  
• Handles detaching from the door
• Doors that will not stay closed securely

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This is a genuine lock nut replacement. This is a general piece of hardware that is often used on several types of lawn and garden equipment, including in engines, housing, and other areas. The exact application of this part will vary based on the unit. The lock nut is used to create a more secure seal than a standard nut. When properly secured, the lock nut tightens to a bolt and uses an extra locking washer with teeth to ensure a snug fit.If lock washers do get damaged or lost, they need to be replaced immediately with a genuine OEM replacement. This model is compatible with all types of machines and units since it is a generic part. The washer is sold as an individual part and manufactured by Whirlpool. Lock nuts will need to be installed using a socket wrench or adjustable wrench. Pliers, a screwdriver, or another socket wrench will be needed to hold the bolt while the lock nut is being secured in place. Be sure to thread the lock nut carefully to ensure a strong seal and avoid stripping the bolt or the nut.

Replacement solenoid that restores electromechanical action for the appliance component it controls, helping restore reliable operation when a worn or failed solenoid prevents movement or actuation. What it does:

• Converts electrical input into mechanical motion to move or hold a controlled mechanism.
• Energizes to engage the component and de-energizes to release it.
• Common symptoms of a failing solenoid: the controlled function doesn't respond, intermittent operation, or a humming/no-movement sound.
• Used as a direct replacement for a failed or sticking solenoid to return normal operation.

• Always disconnect power to the appliance before starting work.
• If the solenoid controls water, shut off the water supply before replacing.
• Match wiring connectors and mounting points; secure the part in the original orientation.
• After installation, restore power/water and test the controlled function for proper operation.

The Bucket Assembly is an OEM part for Frigidaire refrigerators. It stores and dispenses ice cubes from the freezer's icemaker, providing a convenient and accessible storage solution for ice.

A bad bucket assembly can be caused by damage, wear and tear, or malfunctioning components. Signs of a faulty assembly include difficulty in dispensing ice, leaks or drips from the dispenser area, or the ice bucket not fitting properly.

Symptoms of a bad bucket assembly can include:

• Difficulty in dispensing ice cubes 
• Cracks or breaks on the bucket
• The ice bucket not fitting properly 

Replace your damaged or malfunctioning bucket assembly with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This is the icemaker housing assembly that supports and protects the icemaker's internal components, helping maintain proper water routing and structural alignment for reliable ice production. Fits select top- and side-mount refrigerator icemakers. What it does:

• Provides the structural shell that holds the icemaker module and related components in place
• Directs water toward the fill tube and ice mold to help form ice properly
• Shields internal components from debris and helps prevent water leaks around the icemaker area
• Resolves symptoms such as loose or misaligned icemaker, leaking near the icemaker, or inconsistent ice formation

• Icemaker housing assembly (1)

• Disconnect power and water supply before starting any repairs
• Handle plastic housing carefully to avoid cracking tabs or mounting points
• Reuse or replace mounting screws and seals as needed; verify proper alignment before restoring power

This bin assembly is a replacement refrigerator drawer that restores usable storage space and helps keep produce and smaller items organized. It fits into the refrigerator compartment and provides a removable, easy-to-clean storage surface. What it does:

• Replaces a cracked, broken or missing refrigerator drawer so items stay contained
• Restores proper product support and helps prevent items from sliding or falling
• Provides a smooth sliding/removable drawer for easy access to stored food
• Visible, rigid bin construction designed for everyday fridge use

• One bin assembly

• Install by sliding the bin into the existing cabinet rails until it seats; your model's manual for exact placement
• No special tools typically required; remove all food and shelves as needed for access
• Handle carefully to avoid cracking the plastic; wear gloves if necessary to prevent cuts from edges
• If the original mounting rails or supports are damaged, replacement of those parts may be required for secure installation

This 12-14 x 1/2 screw is a factory fastener used to secure appliance panels, brackets, and components. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and keeps parts properly aligned for reliable operation.

• Secures panels, brackets, and internal components to their mounting points
• Replaces damaged, rusted, or missing hardware
• Helps stop vibration and rattling caused by loose fasteners
• Restores proper alignment and stability of covers or assemblies

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the original screw's location and length; replace one at a time
• Start threads by hand to prevent cross-threading; tighten snugly without over-torquing
• Reinstall any original washers, clips, or spacers used with the screw

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread fastener sized #8-32, 3/8-inch length
• Secures control housings, trims, covers, and support brackets per model design
• Replaces missing, worn, or corroded screws that cause loose or rattling parts
• Helps maintain alignment and stability after service

• Unplug the appliance; shut off water if applicable
• Match thread size to the original and start by hand to avoid cross-threading
• Use the correct driver; do not overtighten, especially into plastic
• Verify component alignment and operation after fastening

• Thread size: #8-32
• Length: 3/8 inch

Adjustable leveling feet that restore stability and balance to your appliance by letting you fine-tune height at each corner for a flat, wobble-free install—helps reduce vibration and improve door fit and operation. What it does:

• Provides adjustable height to level an appliance on uneven floors.
• Eliminates rocking or wobbling that can cause vibration, noise or movement during operation.
• Helps ensure doors and panels sit flush and seal properly.
• Durable replacement designed for direct fit where the OEM leveling foot is specified.

• Disconnect power and water before performing any work.
• Support the appliance so it cannot tip—use a jack or have a helper hold it while you adjust feet.
• Turn the foot to raise or lower the corner; use hand tools as needed and avoid excessive force.
• After adjusting, check stability and run a short cycle to ensure vibration and alignment are resolved.

This wire harness connects the range or oven's control and internal components to provide reliable electrical routing and secure connector connections. Replacing a damaged harness restores proper power and signal delivery for controls and lights. What it does:

• Routes power and signals between the control board and internal components (burners, ignitors, lights, switches)
• Ensures secure connector connections to prevent intermittent operation
• Commonly replaces frayed, melted, or broken wiring that can cause loss of function
• Resolves symptoms like no display, intermittent power, burners or lights not working, or tripped breakers

• One pre-assembled wire harness with factory-style connectors

• Disconnect all power (unplug or switch off breaker) before servicing to avoid shock or injury
• Route wires according to original harness path and secure with clips or ties to avoid heat or abrasion