Fg4322es Parts

This refrigerator door gasket seals the door to keep cold air in and help maintain consistent temperatures for food safety and energy efficiency. Replaces a worn, torn, or misshapen seal to reduce drafts and moisture buildup. What it does

• Forms an airtight seal around the refrigerator door to prevent cool air leakage
• Helps maintain consistent internal temperatures for better food preservation
• Reduces frost and condensation that can form from air infiltration
• Can help improve energy efficiency when the original seal is failing

• Clean door flange and mating surfaces before installing to ensure proper sealing
• Warm gasket as needed (per OEM guidance) for easier positioning and to help it conform to the door
• Check alignment and seating around the full perimeter; adjust tabs or fasteners if present
• Unplug the appliance or shut off power before performing service if removal of interior panels or lights is required

This connector is a factory-style wire harness connector that secures electrical wiring and provides a reliable plug-in connection for appliance circuits. It helps restore proper electrical contact and prevents loose or intermittent connections. What it does:

• Joins wiring circuits with a keyed plug to ensure correct polarity and secure connection
• Restores power or signal continuity when an original plug is cracked, corroded, or loose
• Reduces arcing and intermittent operation caused by damaged connector ends
• Fits inline with existing harness locations to maintain OEM routing and function

• One replacement connector

• Always disconnect power at the breaker or unplug the appliance before starting
• Inspect adjoining wires and terminals; trim damaged insulation and use proper crimps if required
• Push connector fully onto mating plug until it latches; secure any retaining clips or harness ties
• If you see melting, heavy corrosion, or damaged wiring, replace the harness.

This slider is a replacement drawer guide that restores smooth, stable sliding for a refrigerator or freezer drawer. It helps the drawer track properly so contents open and close without sticking or binding. What it does:

• Guides the drawer along its track so it slides in and out smoothly
• Keeps the drawer aligned to prevent tipping or catching on the cabinet
• Replaces a worn, cracked, or missing slider that causes scraping or uneven movement
• Reduces noise from dragging or rubbing during opening and closing

• One slider

• Disconnect power to the appliance before starting any repair
• Remove the affected drawer or bin to access the slider; note orientation for reassembly
• Slide or snap the new slider into the existing track; some sliders secure with a small screw or tab
• Test the drawer movement after installation and re-seat any retaining clips as needed

This is a replacement mounting screw used to secure components on compatible Frigidaire appliances. It restores proper fit and prevents loose panels or parts from rattling or shifting during operation. What it does:

• Secures panels, brackets, or small appliance parts to maintain proper alignment
• Prevents vibration-related noise caused by loose fasteners
• Replaces lost or stripped screws to restore safe, stable assembly
• Simple hardware replacement to keep appliance components secure

• One replacement mounting screw

• Power off and unplug the appliance before servicing to avoid shock or injury
• Use the proper screwdriver and align parts before tightening; do not overtighten
• Replace only the exact fastener specified by the manufacturer for that location
• If threads are damaged, inspect the mating part and repair or replace as needed

This adjustable leveling foot replaces a worn or damaged refrigerator leg to stabilize and level the appliance for proper door alignment and even cooling. It helps restore a steady, wobble-free base and maintains safe operation. What it does

• Supports and levels the fridge to prevent rocking or uneven doors.
• Lets you adjust appliance height to align doors and improve seal.
• Helps correct tilting that can cause drainage or cooling issues.
• Restores a solid contact point between the appliance and the floor.

• Typically installs at the cabinet base or corner; verify correct location before tightening.
• Use basic hand tools; adjust height gradually while checking level.
• Disconnect power only if working near electrical components; otherwise no electrical disconnection required.
• Wear gloves to protect hands and avoid pinch points when lifting or supporting the appliance.

This is a replacement refrigerator door gasket that helps restore a tight seal to the door, improving temperature control and reducing frost buildup and energy loss. What it does:

• Seals the refrigerator door edge to keep cold air in and warm, moist air out
• Helps prevent frost buildup and excessive compressor runtime
• Can resolve symptoms like warm interior temps, visible gaps when door is closed, or moisture/ice along the door seal
• Restores proper door closing and magnetic seal engagement when undamaged

• Disconnect power or unplug the appliance before servicing to avoid electrical hazard
• Remove the old gasket completely, clean the gasket channel, and press the new gasket into the channel evenly
• Verify the gasket is fully seated around the door and check for uniform contact when the door is closed
• Follow the manufacturer's instructions carefully

This baffle assembly replaces a damaged or missing dryer drum baffle to restore proper tumbling and airflow. It helps keep clothes separated and supports even drying performance. What it does

• Directs airflow and circulation inside the dryer drum for more consistent drying
• Lifts and tumbles clothes so items dry evenly and avoid bunching
• Reduces drum contact noise from loose or broken baffles
• Prevents garments from getting trapped behind the drum where applicable

• Disconnect power (and gas supply, if applicable) before starting any repair
• Access requires removing the dryer cabinet or drum per your model's service instructions
• Typical tools: screwdriver or nut driver; follow OEM instructions for fastener torque and alignment

This replacement cover restores the appliance's exterior appearance and helps protect internal components from dust and debris. It fits over the designated cabinet area for a finished, safe look. What it does:

• Protects internal parts from dust, moisture, and accidental contact
• Restores a clean, finished exterior where the original cover is dented, cracked, or missing
• Helps keep wiring and components concealed and secured
• Prevents small objects from entering service areas

• Disconnect power (and water, if applicable) before starting any repair
• Remove any adjacent trim or retaining fasteners to access the cover
• Use appropriate hand tools and avoid over-tightening fasteners

This is a replacement mounting screw used to secure appliance panels and small components so parts stay firmly in place during normal use. Installing the correct screw restores proper fit and reduces rattles or loose trim. What it does:

• Fastens panels, brackets, or trim to the appliance frame
• Keeps components aligned to prevent vibration and noise
• Replaces a lost or stripped screw to restore secure attachment
• Helps maintain safe, stable operation by holding parts where they belong

• One replacement mounting screw

• Disconnect power and water before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can damage threads or panels
• Keep removed fasteners organized so you reinstall them in the original locations