Fg4h2272 Uf Parts

This manifold routes and distributes supply within the appliance to the connected components. Replacing a cracked or leaking manifold restores proper flow and helps maintain safe, reliable operation across the system.

• Channels supply from the inlet to multiple connection points
• Provides threaded ports for model-specific fittings and connections
• Helps maintain consistent flow to downstream components
• Typical failure signs: leaks, visible cracks, stripped threads, or multiple components not receiving supply

• Disconnect power and shut off the appliance's supply before servicing.
• Access and replace the manifold per your model's service instructions; transfer any brackets or fittings from the original as required.
• Use manufacturer-approved sealants only where specified; do not overtighten threaded joints.
• Restore supply and check every connection for leaks before returning the appliance to service.

The Evaporator Fan Blade is an OEM component specifically designed for Frigidaire brand refrigerators. This fan blade is located within the evaporator coil assembly and works to circulate cold air throughout the refrigerator compartment. 

Symptoms of a bad fan blade include: 

• Excessive heat buildup inside refrigerator sections
• Inability to sufficiently cool foods or maintain temperatures  
• Vibration or grinding noises emanating from rear wall
• Complete lack of air circulation felt at vents

Causes for replacement include wear and tear of plastic components over many years of constant spinning motion, cracks, or breakage from foreign object interference.

This genuine OEM Frigidaire part is also compatible with some Kelvinator and Admiral models.

This replacement electrical switch controls power to a specific function in your appliance. By opening or closing the circuit, it lets the selected feature turn on and off reliably when you actuate the control.

• Completes or breaks the circuit to start/stop its assigned component
• Restores responsive on/off or selector operation at the control
• Common failure symptoms: feature won't start or won't shut off, intermittent operation, loose/stuck actuator, or heat discoloration on the old switch
• Used in control, console, or door areas depending on model design

• Disconnect appliance from power before servicing
• Access the switch location per your model; remove knob/panel if applicable
• Photograph wire positions and note terminal labels (COM/NO/NC) if present; transfer wires one at a time to the new switch
• Secure mounting, ensure tight connectors, reassemble, restore power, and test operation

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling

This inverter is the electronic control that powers and regulates the refrigerator's variable-speed compressor. When it fails, the compressor may not run, leading to little or no cooling even though interior lights and fans can still operate.

• Converts household AC to the proper power for the compressor and varies speed per the main control's commands
• Helps maintain stable temperatures during normal operation
• Failure may result in warm sections, compressor not running, or intermittent cooling
• Often suspected when fans run but the compressor stays off and the compressor windings test good

• Disconnect power before servicing; the inverter can retain a charge briefly after unplugging.
• Mount the module securely and ensure all keyed connectors are fully seated; route wires away from hot or moving parts.

The Door Switch is an OEM part for Frigidaire refrigerators. It is a basic on/off switch located inside the refrigerator door frame that controls power to interior lights. 

When the door is opened, the magnet inside activates the switch, illuminating LED lights inside the refrigerator and freezer compartments for convenience. This allows for ease of accessing and identifying items without additional switches.

Causes of a bad door switch can include normal wear over time, moisture exposure, or impact damage.

Symptoms of a bad door switch include:

• Lights not turning on when the door is opened
• Lights remaining on continuously even when the door closed  
• Inability to shut off lights manually 

Replacing the switch with a Frigidaire OEM part ensures the refrigerator's interior lights function properly based on the door position. It also helps optimize energy usage. This replacement is compatible with models by Electrolux, Gibson, Kelvinator, and Kenmore.

This replacement panel restores a clean, finished look and proper coverage on your appliance. It replaces a damaged or missing panel so controls and internal components are properly protected and the exterior looks right again.

• Provides the correct finished surface for the designated area of the appliance
• Helps protect internal components from spills, dirt, and impact
• Resolves issues like missing/loose panel, cracked or dented finish, or gaps in the exterior
• Designed to match the original fit and appearance for the applicable models

• Disconnect power before beginning any repair
• Handle the panel carefully to avoid scratching or bending the finish
• Retain and transfer original screws/clips as needed; install evenly without over-tightening
• Verify alignment and door/console operation after installation

Replacement door magnet that helps the refrigerator or freezer door stay closed for a tighter seal and more consistent cooling. Restores magnetic hold so doors close reliably and reduce warm spots. What it does

• Provides magnetic hold for the door liner so the door stays shut during normal use
• Helps maintain the gasket engagement to preserve internal temperature
• Common symptom: door not staying closed, food warming, or frost build-up near the door
• Used in door/gasket assembly where magnets secure the seal

• Turn off power to the appliance or unplug before removing door trim or accessing internal components
• Remove door liner or gasket per service instructions to access and replace the magnet; keep fasteners and seals intact
• Press or seat magnet into its channel or mounting location; use the OEM fastener or adhesive method specified by the manufacturer

The Water Inlet Valve is an OEM part for Frigidaire refrigerators featuring dispensed water and ice. Located inside the cabinet behind the exterior paneling, the inlet valve controls flow into the water filtration system and ice maker assembly. 

Symptoms of a bad inlet valve include:

• Erratic dispenser water flow rates  
• Ice maker failures or water leaks inside cabinet
• Mineral accumulation inside filter chamber  
• Inability to regulate consistent temperature/pressure

Causes of a bad valve can be worn diaphragms, obstructed ports, or damage from mineral buildup over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This fan motor-and-blade assembly restores airflow in compatible Frigidaire refrigerators and freezers to help maintain even temperatures and reduce warm spots. It replaces a failed fan to improve circulation and appliance performance. What it does:

• Circulates air inside the fresh food and freezer compartments for more even cooling.
• Moves air across cooling components to help prevent localized frost and warm zones.
• Replaces noisy, stalled, or non-spinning fans that cause reduced cooling or unusual sounds.
• Supports proper airflow so the appliance can maintain set temperatures more consistently.

• Disconnect power before starting—unplug the appliance or shut off the circuit breaker.
• Access typically requires removing interior panels or the rear evaporator cover; retain fasteners.
• Handle blades carefully to avoid bending; ensure electrical connectors are fully seated.

The Evaporator Fan Motor is an OEM part for Frigidaire refrigerators. It functions to circulate cold air throughout the refrigerator compartment by drawing air across the evaporator coil. Consistent air circulation helps maintain even temperatures.

Symptoms of a bad evaporator fan motor include inconsistent temperatures inside the refrigerator. Sections may be warmer or colder than expected. Icing or frost patterns could indicate improper air flow as well.  

Causes of a bad evaporator fan motor include:

• Fluctuating temperatures within the refrigerator
• Increased frost or ice buildup  
•  Food not staying chilled as expected  
• Abnormal noises coming from the fan area

This Frigidaire replacement is compatible with some Electrolux, Amana, and Kenmore models too. 

The Fan Assembly is an OEM part for Frigidaire refrigerators. It is a crucial component that circulates cool air throughout the refrigerator, ensuring proper temperature regulation and maintaining food freshness.

A bad fan assembly can be caused by wear and tear, motor failure, or blockage. Signs of a faulty assembly include an increase in temperature inside the refrigerator, unusual noises coming from the fan, or poor cooling performance.

Symptoms of a bad fan assembly can include:

• An increase in temperature 
• Unusual noises coming from the fan 
• Poor airflow and uneven cooling

Replace your damaged or malfunctioning fan assembly with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Handle Screw is an OEM part for Frigidaire refrigerators. It is a fastener or screw used to securely attach the refrigerator door handle. Properly installed handles allow for easy opening and closing of refrigerator doors with minimal effort. 

Causes of a bad Handle Screw include damage or wear over time and corrosion that causes the screw to seize or strip. 

Symptoms of a bad Handle Screw are:

• Loose or wobbly door handles
• Difficulty opening the refrigerator door  
• Handles detaching from the door
• Doors that will not stay closed securely

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This mullion assembly replaces the vertical center trim between refrigerator doors to restore a finished appearance and help maintain a proper door seal. It's the correct replacement when the center trim is cracked, warped, or missing. What it does:

• Replaces damaged or broken center mullion trim to restore door fit and appearance
• Helps close the gap between doors to support proper gasket sealing and reduce cold-air leakage
• Stops rattling or door misalignment caused by a worn or broken mullion
• Restores the finished look of the door center where the mullion mounts

• Disconnect power to the appliance before starting any repair and remove food from door area as needed
• Remove any screws, clips, or door trim pieces holding the old mullion and carefully detach it before installing the new assembly
• Align new mullion, secure fasteners snugly (avoid overtightening), and confirm doors close and seal correctly

Replacement solenoid that restores electromechanical action for the appliance component it controls, helping restore reliable operation when a worn or failed solenoid prevents movement or actuation. What it does:

• Converts electrical input into mechanical motion to move or hold a controlled mechanism.
• Energizes to engage the component and de-energizes to release it.
• Common symptoms of a failing solenoid: the controlled function doesn't respond, intermittent operation, or a humming/no-movement sound.
• Used as a direct replacement for a failed or sticking solenoid to return normal operation.

• Always disconnect power to the appliance before starting work.
• If the solenoid controls water, shut off the water supply before replacing.
• Match wiring connectors and mounting points; secure the part in the original orientation.
• After installation, restore power/water and test the controlled function for proper operation.

The Bucket Assembly is an OEM part for Frigidaire refrigerators. It stores and dispenses ice cubes from the freezer's icemaker, providing a convenient and accessible storage solution for ice.

A bad bucket assembly can be caused by damage, wear and tear, or malfunctioning components. Signs of a faulty assembly include difficulty in dispensing ice, leaks or drips from the dispenser area, or the ice bucket not fitting properly.

Symptoms of a bad bucket assembly can include:

• Difficulty in dispensing ice cubes 
• Cracks or breaks on the bucket
• The ice bucket not fitting properly 

Replace your damaged or malfunctioning bucket assembly with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.