Fg4h2272 Uf Parts

This is the icemaker housing assembly that supports and protects the icemaker's internal components, helping maintain proper water routing and structural alignment for reliable ice production. Fits select top- and side-mount refrigerator icemakers. What it does:

• Provides the structural shell that holds the icemaker module and related components in place
• Directs water toward the fill tube and ice mold to help form ice properly
• Shields internal components from debris and helps prevent water leaks around the icemaker area
• Resolves symptoms such as loose or misaligned icemaker, leaking near the icemaker, or inconsistent ice formation

• Icemaker housing assembly (1)

• Disconnect power and water supply before starting any repairs
• Handle plastic housing carefully to avoid cracking tabs or mounting points
• Reuse or replace mounting screws and seals as needed; verify proper alignment before restoring power

This bin assembly is a replacement refrigerator drawer that restores usable storage space and helps keep produce and smaller items organized. It fits into the refrigerator compartment and provides a removable, easy-to-clean storage surface. What it does:

• Replaces a cracked, broken or missing refrigerator drawer so items stay contained
• Restores proper product support and helps prevent items from sliding or falling
• Provides a smooth sliding/removable drawer for easy access to stored food
• Visible, rigid bin construction designed for everyday fridge use

• One bin assembly

• Install by sliding the bin into the existing cabinet rails until it seats; your model's manual for exact placement
• No special tools typically required; remove all food and shelves as needed for access
• Handle carefully to avoid cracking the plastic; wear gloves if necessary to prevent cuts from edges
• If the original mounting rails or supports are damaged, replacement of those parts may be required for secure installation

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread fastener sized #8-32, 3/8-inch length
• Secures control housings, trims, covers, and support brackets per model design
• Replaces missing, worn, or corroded screws that cause loose or rattling parts
• Helps maintain alignment and stability after service

• Unplug the appliance; shut off water if applicable
• Match thread size to the original and start by hand to avoid cross-threading
• Use the correct driver; do not overtighten, especially into plastic
• Verify component alignment and operation after fastening

• Thread size: #8-32
• Length: 3/8 inch

This wire harness connects the range or oven's control and internal components to provide reliable electrical routing and secure connector connections. Replacing a damaged harness restores proper power and signal delivery for controls and lights. What it does:

• Routes power and signals between the control board and internal components (burners, ignitors, lights, switches)
• Ensures secure connector connections to prevent intermittent operation
• Commonly replaces frayed, melted, or broken wiring that can cause loss of function
• Resolves symptoms like no display, intermittent power, burners or lights not working, or tripped breakers

• One pre-assembled wire harness with factory-style connectors

• Disconnect all power (unplug or switch off breaker) before servicing to avoid shock or injury
• Route wires according to original harness path and secure with clips or ties to avoid heat or abrasion

This left-hand door closer replaces the refrigerator/freezer door closer that helps the door swing closed smoothly and stay aligned for a proper seal. Restores reliable closing and reduces door sag or misalignment. What it does:

• Guides and supports the left-side door as it closes to prevent slamming and ensure proper latch engagement
• Helps maintain an even seal to preserve internal temperature and reduce energy loss
• Reduces door sag, rubbing, or uneven gaps caused by worn or broken closers
• Works with the existing hinge/door hardware to control door motion

• High-level replacement — remove the door trim/inner panel to access the closer if required
• Keep screws and brackets organized; verify orientation for left-hand side before fastening
• Disconnect power to the appliance or follow manufacturer's safety guidance when working near electrical components

This name plate is the exterior ID label that restores the appliance's factory identification and appearance. It replaces a faded, torn, or missing label so the unit is easier to identify and looks finished. What it does:

• Provides the factory identification label used for appliance identification and service reference
• Restores the appliance's exterior appearance where the original label was damaged or missing
• Helps owners model/serial information displayed on the appliance surface
• Fits the location originally occupied by the manufacturer's label (surface-mount style)

• One replacement name plate

• Install using the original fasteners or adhesive; do not force or bend the plate
• Clean and dry the mounting area before installation for proper adhesion or fit
• Disconnect power to the appliance before working in areas that expose electrical components
• If original mounting hardware is missing or damaged, use like-for-like replacements rated for appliance use

This harness with reed switch detects a magnetic field and provides a ready-made wiring connection for the appliance's door/sensor circuit, restoring reliable sensing and signal routing. What it does

• Contains a reed (magnetic) switch in-line with a multi-conductor harness to detect open/closed or presence/absence of a magnetic field
• Replaces a damaged or faulty sensor harness that can cause intermittent or no signal to the control board
• Common symptoms: appliance not sensing door/cover, controls not responding, or features tied to the sensor fail to activate
• Designed to mate with the factory connector set and routing used by the original equipment

• One complete harness with reed switch

• Verify power is disconnected before accessing wiring or replacing the harness
• Handle the reed switch and connectors gently to avoid damage; secure harness with original clips or fasteners

This refrigerator door gasket seals the cabinet to keep cold air in and warm air out, helping the appliance maintain proper temperatures and efficiency. It replaces a worn, torn, or distorted seal to reduce frost and spoilage risk. What it does:

• Creates an airtight seal around the refrigerator door to prevent cold air leaks
• Helps maintain consistent internal temperatures for food safety
• Reduces frost buildup and excessive compressor run time caused by leaking seals
• Restores proper door closure when the original gasket is cracked, warped, or split

• Inspect the cabinet sealing surface and remove old gasket adhesive or debris before installing
• Warm the gasket (per OEM guidance) or let it sit at room temperature to make it pliable for easier installation
• Press the gasket firmly into the channel, working around the door evenly to avoid gaps
• Disconnect power before working near electrical components

The Right Door Closer is an OEM part for Frigidaire refrigerators. It is responsible for ensuring that the refrigerator door closes securely and maintains a proper seal, keeping the cold air inside and your food fresh.

A bad right door closer can be caused by wear and tear, damage, or misalignment. When the closer becomes faulty, it can result in issues such as a loose or sagging door, difficulty in closing the door properly, or a compromised seal that leads to temperature fluctuations.

Symptoms of a bad right door closer include:

• Door not closing or sealing properly
• Condensation or frost buildup inside the refrigerator
• Noisy or squeaking door operation

Replace your faulty right door closer with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This condenser shroud is the molded cover that protects the refrigerator condenser coil and helps direct airflow for efficient cooling performance. It replaces damaged or missing shrouds to restore proper condenser protection and airflow routing. What it does

• Covers and protects the condenser coil from debris and accidental contact
• Helps channel airflow across the condenser for efficient heat dissipation
• Prevents objects from obstructing the condenser fins, which can reduce cooling
• Fits into the lower rear cabinet area to maintain proper component positioning

• One condenser shroud

• Remove power to the appliance before accessing the condenser area
• Handle carefully to avoid bending or damaging condenser fins and mounting tabs
• Typical installation uses existing screws or clips; confirm all fasteners are present and secure

This door gasket seals the refrigerator door to keep cold air in and warm air out, helping maintain proper temperatures and reduce energy use. It replaces a worn or torn seal to restore appliance performance. What it does:

• Creates an airtight seal around the refrigerator door to prevent cold air loss
• Helps stop frost buildup and reduces condensation inside the compartment
• Reduces compressor run time and energy waste caused by a failing seal
• Commonly replaced when the seal is cracked, torn, flattened, or no longer seals

• Always disconnect power to the appliance before starting any repair
• Clean the door channel and remove old adhesive or debris before installing the new gasket
• Press the gasket into the channel evenly; start at one corner and work around the door for a consistent seal
• If needed, warm the gasket slightly to make it more pliable for installation; avoid using open flames or excessive heat

This replacement refrigerator door gasket restores a tight seal to help keep cold air in and warm air out, improving cooling performance and helping prevent frost and moisture buildup around the door. What it does:

• Creates an airtight seal around the refrigerator door to maintain interior temperature
• Helps reduce frost buildup in the freezer and prevents moisture intrusion
• Minimizes energy loss from warm air entering the cabinet
• Can stop small leaks and cold-air drafts caused by a torn or worn seal

• Inspect the door and mounting channel for damage or debris before installing
• Warm and flex the gasket as needed for easier positioning; follow OEM bedding/adhesive instructions if applicable
• Replace with matching gasket orientation; incorrect fit can cause poor sealing
• Disconnect power only if removal requires heating elements or light assembly—otherwise follow standard safety precautions

This water tank assembly is the molded reservoir that stores and supplies water for the appliance's dispenser and ice-making system, restoring proper water flow and reducing leaks from a damaged reservoir. What it does:

• Holds and delivers water to the dispenser and/or ice maker as part of the unit's water system
• Replaces cracked, warped, or leaking reservoirs that cause visible leaks
• Restores normal water flow when a damaged tank prevents dispensing or filling
• Helps resolve intermittent filling or low-water symptoms related to the reservoir itself

• Disconnect power and shut off the water supply before starting work
• Handle the reservoir carefully to avoid damage to fittings and seals
• Replace any worn gaskets or hoses and test for leaks after installation

This replacement door gasket seals the refrigerator door to help maintain consistent internal temperature and reduce energy loss. It restores a tight seal to improve cooling performance and help prevent frost buildup when the original seal is worn or damaged. What it does:

• Creates an airtight seal between the door and cabinet to keep cold air in and warm air out
• Helps reduce frost buildup, condensation, and excessive compressor run time when the original gasket is failing
• Restores proper door alignment and contact along the door perimeter for consistent cooling
• Commonly replaced when the seal is cracked, torn, flattened, or no longer holds suction

• One door gasket

• Designed for drop-in replacement; remove the old gasket and press the new gasket into the door channel evenly
• Warm the gasket if needed to help it flex and seat; follow manufacturer instructions for any heat treatment
• Inspect mounting channel and door for damage before installing; replace any damaged trim or clips as needed
• Unplug the appliance or disconnect power prior to installation and allow interior components to cool

This shaft is a direct-replacement support pin that restores proper alignment and rotation in compatible Frigidaire appliances. It helps return worn or damaged supports to factory fit so components turn smoothly. What it does

• Supports and aligns a rotating component so it turns true and without excessive wobble
• Transfers rotational force from the motor/drive to the drum or rotor
• Common symptom: loud noise or scraping during operation
• Common symptom: drum or component feels loose or wobbly when spun by hand

• Disconnect power before starting any repair.
• Access may require removing panels or the appliance drum; keep track of fasteners.
• Inspect mating bearings, bushings, and seals; replace if worn to prevent premature wear of the new shaft.