Fgbm85kfa Parts

This is a genuine mounting screw used to secure appliance components and panels for a safe, stable fit. It replaces a lost or damaged fastener to restore proper alignment and reduce rattles or loose trim. What it does:

• Secures panels, trim, brackets or small assemblies to the appliance frame
• Prevents vibration-related noise and loose or sagging parts
• Restores proper fit after repair or disassembly
• Useful when the original screw is stripped, missing, or broken

• One mounting screw

• Use the correct screwdriver or bit to avoid stripping the head
• Power off and unplug the appliance before servicing when applicable
• Keep removed hardware organized to ensure correct reassembly
• If threads are damaged, replace with the specified OEM screw only

This small mounting retainer clip secures panels and components in place on your appliance, helping keep parts aligned and reducing rattles. A simple replacement when a worn or broken clip allows loose or misaligned panels. What it does:

• Holds trim, panels, or wiring channels in position to prevent movement and noise
• Restores proper fit where a cracked or missing clip lets parts sag or separate
• Helps maintain seals and component alignment for normal operation
• Works as a direct-fit replacement clip used on specified Frigidaire assemblies

• One mounting retainer clip

• Disconnect power before starting any repair to avoid shock or injury
• Access the clip location by removing the outer panel or trim per your model's service instructions
• Remove the broken clip and press or snap the replacement into the existing mounting slot until fully seated
• If fasteners are present, reuse OEM screws; do not force clips into damaged plastic

This replacement frame restores the appliance's front trim and secures the control/door area for a finished look and proper panel alignment. Use it to repair bent, cracked, or loose trim and return the unit to safe, stable operation. What it does:

• Replaces damaged or warped front cabinet trim to restore proper panel fit and appearance
• Secures the control panel/door edges and helps maintain correct alignment
• Prevents gaps that can collect dirt or interfere with door operation
• Common symptom: visible cracks, dents, separation or loose trim around the front panel

• One replacement frame

• Disconnect power to the appliance before starting any repair
• Remove exterior trim screws or clips holding the old frame; retain fasteners unless replacements are provided
• Handle edges and any attached glass or plastic carefully to avoid damage or injury

This fan blade mounts to the refrigerator fan motor to move air through the appliance for proper cooling and temperature circulation. Replaces a worn or damaged blade to restore airflow and improve cooling efficiency. What it does:

• Spins on the fan motor to circulate air across the evaporator or condenser coils
• Restores proper airflow when a cracked or broken blade causes reduced cooling
• Helps stop vibration or rattling caused by bent or missing blades
• Can reduce motor strain from an imbalanced or damaged blade

• Disconnect power to the appliance before starting any repair
• Remove access panels and fan shroud to reach the blade; keep track of mounting hardware
• Replace carefully to avoid bending the blade; ensure correct orientation on the motor shaft

This temperature control thermostat regulates the refrigerator's cooling cycle to help maintain set temperatures in the fresh food compartment. Replaces a failed thermostat to restore proper compressor cycling and temperature control. What it does:

• Senses cabinet temperature and cycles the compressor on and off to maintain the selected setting.
• Stops cooling when the set temperature is reached and restarts cooling as temperatures rise.
• Commonly used when the refrigerator is running constantly, not cooling, or temperatures are inconsistent.
• Works with the control knob/capillary assembly to provide user-adjustable temperature control.

• Disconnect power to the appliance before attempting service.
• Access typically requires removing the control knob and control housing; handle the capillary tube gently to avoid kinks.
• Verify correct replacement location and routing before reassembly; test operation after restoring power.

This transformer supplies low-voltage power to the refrigerator's control circuits so electronic components receive stable power for reliable operation. Replace a failed transformer to restore power to controls and related functions. What it does

• Converts line voltage to low-voltage power used by control boards and electronic modules.
• Commonly linked to symptoms like non-working control displays, no response from dispenser or ice controls, or intermittent electronic behavior.
• Works as a direct replacement part when the original transformer fails or shows electrical faults.
• Designed to mount and wire into the appliance's control compartment per OEM configuration.

• One transformer

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Verify wiring locations and harness orientation before removal; label connectors if needed.
• Use proper tools and follow the appliance's service manual for access and mounting instructions.

This replacement lever restores reliable manual control of the appliance component it attaches to, letting the door, dispenser or mechanism operate smoothly and predictably. Durable molded construction resists wear from normal use. What it does

• Replaces a broken, cracked or worn lever that no longer engages or pivots correctly
• Restores proper mechanical linkage so doors, latches or dispensers can open and close as intended
• Prevents slipping, binding or intermittent operation caused by damaged lever geometry
• Matches the OEM shape to fit mounting posts and pivots without modification

• One replacement lever

• Disconnect power (and water if applicable) before starting any repair
• Remove the panel or housing that covers the lever mounting area to access fasteners and clips
• Keep small screws and clips organized; lever typically secures on a post or with a retaining clip

This evaporator fan motor circulates cold air through the freezer and refrigerator compartments to maintain even cooling. Replacing a failed fan motor restores proper airflow and helps prevent temperature drift and frost buildup. What it does:

• Spins the evaporator fan blade to move cold air across the evaporator coil and into the cabinet.
• Supports even temperature distribution between freezer and fresh-food sections.
• Common symptom link: cabinet running warmer or uneven temperatures.
• Common symptom link: excessive noise or a fan that does not spin.

• Disconnect power to the appliance before servicing to avoid electric shock.
• Handle the motor and fan blade carefully to avoid bending the blade or damaging the shaft.
• Secure all fasteners and harnesses.
• After installation, restore power and confirm the fan runs quietly and that airflow is restored.

This replacement refrigerator water filter cartridge helps restore clean tasting water and ice by trapping common impurities. Designed as a direct-fit replacement to maintain your fridge's filtered water supply and improve taste clarity. What it does:

• Filters particulates and common contaminants to improve water and ice taste
• Helps reduce visible sediment and cloudiness from the dispenser and ice maker
• Restores normal dispensing performance when an old filter causes off-flavors or odors
• Supports consistent filtered water flow when installed and maintained

• Turn off the water supply and follow the refrigerator's filter-replacement instructions before starting
• Push/rotate or slide per your model's procedure until the filter locks in place; ensure a secure seal
• Run water through the dispenser for a short time after installation to flush air and initial carbon fines
• Replace regularly per the refrigerator manufacturer's recommendation or sooner if flow decreases or taste returns

This replacement grill restores the appliance's front vent trim and appearance while helping keep the vent opening protected from debris. Use it to replace cracked, broken, or visibly worn grills that rattle or look damaged. What it does

• Covers the front vent/air opening and provides a finished trim around the area
• Helps keep debris and small objects out of the vent opening
• Replaces cracked or broken grills that can cause rattling or loose fit
• Restores a consistent, finished appearance to the appliance front

• Disconnect power (or gas supply where applicable) before servicing the appliance.
• Many grills secure with screws or snap-in tabs behind the lower access panel or oven door; remove panels carefully to reach mounting points.
• Handle mounting tabs gently to avoid breaking them during removal or installation.

This replacement motor restores power to the appliance's fan or blower assembly so airflow and cooling performance resume. Use it to replace a failed or noisy motor and get your appliance running normally again. What it does

• Spins the fan/blower or driven component to circulate air or operate the mechanism.
• Replaces motors that stall, hum, or do not run at all.
• Can resolve reduced airflow, warm compartments, or uneven cooling when motor failure is the cause.
• Designed to match the appliance's original motor function and mounting.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Verify the motor part number and physical fit against the unit before installation.
• Basic hand tools required; access may require removing panels or shelves.

This replacement electrical wire harness routes power between components so your appliance can run reliably. It restores connectivity for circuits affected by damaged or worn wiring. What it does

• Carries electrical current between internal components to restore power and signal continuity.
• Replaces frayed, cut, or burnt wiring that can cause intermittent operation or component failure.
• Helps eliminate arcing, visible burn marks, or loose-disconnect issues at terminals.
• Matches original connector types and color-coded leads for a straightforward swap.

• Always disconnect power before starting any repair to avoid shock or injury.
• Verify connector orientation and wire colors match the original before finalizing connections.
• Route and secure the harness away from moving parts and hot surfaces to prevent wear.