Fghb2866pena Parts

This replacement fan shroud screw secures the evaporator/condenser fan shroud to the appliance, helping keep the fan assembly stable for proper airflow and quiet operation. Use it to replace stripped or missing mounting hardware. What it does:

• Secures the fan shroud or mounting bracket to the appliance cabinet or fan assembly
• Helps prevent fan wobble, rubbing, and airflow disruption caused by a loose shroud
• Restores proper clearance between fan blades and shroud to reduce noise and wear

• High-level replacement—remove power to the appliance before starting work
• Use appropriate-size driver to avoid stripping the screw head
• Inspect surrounding hardware and shroud for damage; replace any damaged parts before reassembly

This replacement can dispenser fits inside the refrigerator door to hold and dispense canned beverages, restoring neat storage and easy single-can removal. Designed to match OEM fit and door-rack function for compatible models. What it does:

• Holds a stack of cans securely in the door to maximize shelf space
• Allows one-can-at-a-time dispensing for easier access and organization
• Prevents cans from rolling or shifting during door open/close
• Restores proper door storage if original dispenser is cracked, broken, or missing

• High-level installation: remove door shelf or trim as needed, unclip old dispenser, and snap new dispenser into place
• No special tools typically required; use a flat screwdriver or trim tool to release clips if needed
• Handle parts gently to avoid cracking the door trim; do not force clips
• Disconnect power only before working near electrical components

This tube connector is a small water-line fitting that joins refrigerator water and ice-maker tubing, restoring a secure path for water flow. It helps stop leaks and regain consistent water delivery to the dispenser or icemaker. What it does:

• Joins two sections of refrigerator water tubing to maintain a watertight connection
• Stops leaks at a damaged or worn tube joint
• Restores water flow to the ice maker or dispenser when a broken connector is the cause
• Compatible with rigid and soft tubing in typical refrigerator plumbing layouts

• One tube connector

• Shut off the refrigerator water supply before servicing
• Inspect tubing ends and replace damaged tubing or seals as needed
• Use proper fittings and tighten to manufacturer torque; avoid over-tightening

Air duct insulation that fits over the refrigerator air duct to reduce condensation and help direct airflow for more consistent cooling. Replaces worn or torn duct insulation to help prevent moisture buildup and improve efficiency. What it does:

• Wraps around the refrigerator air duct to insulate and reduce condensation
• Helps maintain consistent air temperature as it moves between compartments
• Reduces moisture and frost buildup on the duct and surrounding components
• Restores original fit where torn, compressed, or missing insulation causes issues

• Before starting, disconnect power to the appliance to avoid electrical hazards
• Remove access panels per your model's service instructions to reach the duct
• Slide or wrap the insulation around the duct, ensuring full coverage and a snug fit
• Replace any damaged fasteners or adhesive strips; test operation and check for proper airflow after reassembly

The Insulation is an OEM part for Frigidaire refrigerators. Thin sheets of insulation are installed throughout the cabinet walls and interior surfaces to optimize temperature control. The insulation acts as a barrier, preventing cold air from escaping and warm air from entering the refrigerator and freezer compartments.

Causes can be normal breakdown of material over many years, exposure to moisture, or accidental damage compromising insulation integrity.

Symptoms of bad insulation include:

• Fluctuating interior temperatures
• Slower cooling recovery after door openings
• Presence of condensation or frost outside walls or doors
• Higher energy bills from inefficient containment

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Keep your fridge sealing tightly with this replacement door gasket. It restores the refrigerator door seal to help maintain proper cooling, reduce energy use, and limit moisture and frost buildup for consistent food storage. What it does:

• Seals the refrigerator door to prevent cold air leakage and maintain set temperature
• Helps reduce frost buildup and condensation inside the fresh-food compartment
• Lowers strain on the compressor caused by escaping cold air
• Commonly replaced when you notice warm spots, persistent moisture, visible gaps, or a door that won't seat properly

• Disconnect power and remove food from the door area before replacing the gasket
• Inspect the gasket mounting channel for debris or damage and clean before installing
• Avoid sharp tools that could tear the gasket during removal or installation
• After installing, allow the gasket to form and check the door seal; door may need to be closed slowly for final seating

This lower basket kit replaces a damaged lower dish rack to support plates, bowls and cookware in the dishwasher and restore proper loading and cleaning. It provides a stable, organized lower rack for everyday dishwashing. What it does

• Holds and separates dishes, bowls and cookware in the dishwasher's lower cavity for thorough washing.
• Restores proper rack alignment and stability when tines are bent or sections are damaged.
• Replaces worn or missing lower rack components that cause noisy rolling or improper drainage.
• Helps prevent dishes from contacting the spray arm or each other during wash cycles.

• One lower basket kit.

• Remove power and empty the dishwasher before replacing the rack.
• Slide out the old lower rack and set the new kit into the lower track; wheels/tines typically snap into place.
• Inspect for sharp edges or rust; replace the kit if structural corrosion is present.

A replacement door air filter trim that secures and covers the refrigerator's air filter assembly, keeping the filter in place and maintaining a finished interior appearance. Restores proper fit and helps the filter seal correctly. What it does:

• Secures the air filter cartridge inside the refrigerator door so it stays properly positioned.
• Helps maintain an even airflow path through the filter for odor control and air circulation.
• Replaces cracked, warped, or missing trim that creates gaps or prevents the filter from seating.
• Improves the door interior finish by covering the filter opening.

• Disconnect power to the appliance before starting service to avoid electrical risk.
• Remove food and door bins as needed for access; handle parts gently to avoid damage.
• Trim typically snaps or screws into place—retain any original fasteners if present.
• Inspect related components and replace as necessary.

This OEM-style refrigerator shelf divider keeps items separated and organized so groceries stay in place and drawers/shelves stack neatly. It replaces a cracked, warped, or missing divider to restore proper storage separation. What it does:

• Separates food and containers to prevent shifting and contact between items
• Restores intended shelf/drawer organization and usable space
• Helps keep contents from sliding when doors open or close
• Useful when the original divider is cracked, broken, or missing

• One replacement divider

• High-level replacement: remove the shelf or drawer as needed, align the divider in its mounting slots, and press into place
• Use caution handling glass shelves or sharp edges; wear gloves to protect hands
• Check fit and alignment before returning contents to avoid interference with door or drawer movement
• If mounting clips or tracks are damaged, replace those parts rather than forcing the divider

This upper hinge cover is a molded plastic trim piece that protects and conceals the refrigerator door hinge assembly while keeping the cabinet opening neat. It restores the finished appearance and helps prevent dirt buildup around the hinge. What it does:

• Covers and protects the upper door hinge area from dust, debris, and incidental contact
• Conceals hinge hardware for a clean, factory appearance
• Replace if cracked, broken, missing, or if the hinge area looks exposed or unsightly
• Matches OEM fit and shape to maintain proper clearance around the hinge

• High-level: installation typically requires removing or supporting the door; follow the appliance manufacturer's service instructions
• Use basic hand tools; take care not to damage surrounding trim or paint
• Always disconnect power to models with connected electronics before doing service that could affect wiring