Fghb2868td Parts

The Air Tower is an OEM part for Frigidaire refrigerators. It is responsible for distributing cold air throughout the refrigerator compartment.

A bad air tower can be caused by blockages, damage, or wear and tear over time. Signs of a faulty assembly include improper cooling, uneven temperature distribution, or frost buildup.

Symptoms of a bad air tower include:

• Inconsistent cooling 
• Frost accumulation 
• Poor temperature regulation

Replace your damaged or malfunctioning air tower with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Shelf Assembly is an OEM part for Frigidaire refrigerators. As an adjustable interior storage rack, it provides a durable surface to neatly organize food, beverages and other items within the refrigerator chamber. 

Causes of damage can include cracks, chips or breaks due to prolonged usage accumulating wear and tear, as well heavy packages exceeding weight ratings. Sharp edges present risk of cuts to hands and food packaging.

Symptoms of a faulty shelf assembly involve:

• Sagging or bowing shelves incapable of firmly supporting contents  
• Difficulty sliding in and out of refrigerator tracks
• Gaps or separation from support brackets compromising structural integrity

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models. 

This replacement door gasket seals the freezer compartment to help keep cold air in and warm air out, improving temperature stability and energy efficiency. It restores a tight seal for effective cooling and frost control. What it does:

• Creates an airtight seal around the freezer door to prevent cold air loss
• Helps reduce frost buildup and maintain consistent internal temperatures
• Can improve cooling performance and reduce run time from air leaks
• Common symptoms: visible gaps, torn or deformed gasket, frost buildup, or higher-than-normal appliance run time

• Remove the old gasket and clean mounting surface of dirt and old adhesive before installing
• Start at one corner, align the gasket, and press into the door channel evenly for a full seal
• Some gaskets seat better after a short warm water soak or gentle stretching—follow OEM guidance
• If magnets or mounting clips are present, confirm they are engaged.

This tube adapter connects and seals a refrigerator water line to the inlet or valve, restoring a secure water pathway for the ice maker or dispenser. Use it to stop leaks and re-establish reliable water flow. What it does

• Adapts and secures the appliance water tube to the inlet or valve, forming a leak-proof connection
• Restores proper water feed to the ice maker and/or water dispenser when the original adapter is damaged
• Helps prevent drips or steady leaks at the tube connection
• Works with standard refrigerator water tubing and compression fittings where specified

• One tube adapter

• Turn off the refrigerator power and shut off the household water supply before starting
• Remove the damaged adapter and clean tube ends; replace with this adapter using appropriate compression or push-fit method
• Tighten fittings to a snug, leak-free fit; avoid over-tightening plastic parts
• After installation, restore water and power, and check thoroughly for leaks

This anti-tip bracket secures the front of a freestanding range or oven to help prevent the appliance from tipping forward when the door is open. It provides a simple safety anchor that reduces tip-over risk and improves stability. What it does:

• Anchors the range to the floor or wall framing to resist forward tipping when the oven door is opened.
• Helps prevent appliance movement during normal use or when cookware is on the door.
• Addresses signs of a loose or shifting range: visible forward tilt, rocking at the front, or uneven gap between appliance and cabinetry.
• Works with the range's leveling and anti-tip system to maintain stable operation.

• One anti-tip bracket

• Install bracket to solid floor or wall framing per the appliance installation instructions; follow exact mounting locations and fastener types recommended by the manufacturer.
• Level the appliance and verify engagement with the bracket after sliding the range into place.
• Use appropriate fasteners for your floor/wall material.
• Disconnect power to the appliance before working in tight areas and follow all safety guidance in the owner's manual.

This door handle is a direct replacement designed to restore a secure, comfortable grip on a range or oven door so you can open and close it safely and easily. It matches OEM fit and appearance for easy repairs. What it does:

• Replaces a cracked, broken, worn or loose oven/range door handle
• Provides a stable grip for opening and closing the appliance door
• Restores proper handle alignment and improves user safety when handling the door
• Helps prevent further damage to the door trim or surrounding parts caused by a failing handle

• One replacement door handle

• Disconnect power to the appliance before beginning any repair to avoid electrical hazard
• Handle typically fastens with screws located under trim or a small access cover—use a screwdriver and keep fasteners handy
• Inspect mounting studs or brackets for damage and replace if needed for a secure fit

The Air Duct Seal is an OEM replacement part for Frigidaire refrigerators. It is a rubberized seal that creates an airtight connection between the refrigerator ductwork and internal fans/vents. This seal works to carefully direct chilled air to optimize freshness preservation in different fridge zones.

Causes of a bad air duct seal can include degradation over time from constant vibration and temperature fluctuations inside the fridge walls. 

Symptoms of a bad air duct seal include:

• audible leaks or whistling noises originating from duct areas
• inadequate air circulation causing temperature variations  
• buildup of frost or moisture near improperly sealed ducts

Replace with this genuine OEM seal to restore balanced air control for fresher stored foods. It fits refrigerator models also compatible with Electrolux, Gibson, Kelvinator, and Kenmore designs.

The Door Stop is an essential OEM replacement part for Frigidaire bottom-mount refrigerators. It functions to securely hold the refrigerator door fully open during loading and unloading of food items. 

Causes of a faulty door stop include cracking or warping due to years of resisting door closure force during access. Friction might also wear down moving lever components over time.

Symptoms of a bad door stop are:

• Refrigerator door unable to safely prop fully open  
• Door slowly closing partially while items are retrieved
• Visible wear marks or loss of lubrication where door pivots

This authentic OEM replacement is compatible for Frigidaire, Electrolux and Kenmore models. 

This left-hand door closer replaces the refrigerator/freezer door closer that helps the door swing closed smoothly and stay aligned for a proper seal. Restores reliable closing and reduces door sag or misalignment. What it does:

• Guides and supports the left-side door as it closes to prevent slamming and ensure proper latch engagement
• Helps maintain an even seal to preserve internal temperature and reduce energy loss
• Reduces door sag, rubbing, or uneven gaps caused by worn or broken closers
• Works with the existing hinge/door hardware to control door motion

• High-level replacement — remove the door trim/inner panel to access the closer if required
• Keep screws and brackets organized; verify orientation for left-hand side before fastening
• Disconnect power to the appliance or follow manufacturer's safety guidance when working near electrical components

This grille clip is a small plastic retainer that secures a refrigerator grille or trim piece to the cabinet, keeping the front panels aligned and preventing rattles or gaps for a tidy appearance. What it does:

• Secures the lower/front grille or trim to the appliance cabinet to hold it in place
• Prevents grille movement, rattling, or sagging that can occur with worn clips
• Helps maintain a tight fit between trim and cabinet for a finished look
• Simple replacement part when existing clip is cracked, broken, or missing

• One grille clip

• Typically snaps into place; inspect mating slot and clip orientation before installing
• Replace any damaged adjacent clips for even support and fit
• Work carefully to avoid damaging the grille or surrounding trim

This molded evaporator cover replaces the plastic trim that protects and directs airflow over the freezer evaporator; it helps maintain even cooling and keeps ice and debris away from the coil assembly. Fits the OEM mounting locations for a proper seal. What it does

• Protects the evaporator coil from loose food and debris that can impede airflow.
• Directs cold air through the freezer compartment for more consistent temperatures.
• Helps reduce frost build-up on the evaporator by maintaining proper airflow patterns.
• Restores proper fit and appearance where the original cover is cracked, warped, or missing.

• One evaporator cover

• Disconnect power to the appliance before starting any repair.
• Remove screws or fasteners holding the old cover; handle tabs carefully to avoid breaking mounting clips.
• Defrost and dry the area if there is ice buildup before installing the new cover.
• Reassemble panels and verify there are no gaps that could allow air leaks or contact with moving components.

Color: Black

This ice container holds and stores ice made by the freezer's icemaker so you have accessible, neatly contained ice for dispensing and use. Durable molded plastic keeps ice contained and aligned for smooth dispensing. What it does

• Collects and stores ice produced by the icemaker, preventing loose cubes from scattering
• Guides ice toward the dispenser area or door bin for reliable access
• Replaces cracked, warped, or discolored bins that can catch on the dispenser or allow spillage
• Helps maintain sanitary storage by keeping ice separated from other freezer items

• One ice container / ice bin

• Disconnect power to the appliance before any service to avoid risk of injury
• Remove the old ice bin by sliding it out from the freezer compartment; align and slide the new bin into place
• Handle the bin carefully to avoid cracking; do not force into position
• If the ice dispenser doesn't operate after install, check the icemaker and dispenser components separately

This shelf channel mounting bracket secures the shelf channel to the appliance cabinet so shelves stay level and stable. It replaces a broken or worn mount to restore proper shelf alignment and support. What it does

• Secures the shelf channel to the cabinet frame so shelves sit flush and don't tilt.
• Prevents shelf movement or sagging caused by a loose or cracked mount.
• Helps maintain safe storage by keeping items from sliding off tilted shelves.
• Fits where the original channel mount has cracked, worn, or snapped.

• Designed for simple replacement—remove the shelf and channel to access the mounting bracket.
• Use appropriate hand tools; avoid over-tightening fasteners which can crack plastic components.
• Disconnect power and remove stored items from the shelf area before beginning work.
• If mounting locations are damaged, assess surrounding supports; replace any additional broken hardware.

This cabinet corner trim is a direct-replacement trim piece that restores a finished edge and protects the appliance cabinet corner from chips, dings, and moisture. It improves appearance and keeps the cabinet edge sealed. What it does:

• Covers and protects the exposed cabinet corner to prevent further chipping or damage
• Restores a clean, finished look where the original corner trim is cracked, broken, or missing
• Helps reduce gaps that can collect dirt or moisture along the cabinet edge
• Fits into the cabinet trim profile to hold adjacent trim pieces in place when intact

• Disconnect power to the appliance before starting work if trim removal requires access behind panels.
• Remove the damaged trim carefully — some styles snap off, others are secured with clips or screws; keep hardware if reusable.
• Align the replacement trim with the cabinet edge and press or fasten into place until seated; avoid forcing plastic to prevent cracking.

This cabinet corner trim is a replacement corner piece that restores the finished edge of the appliance cabinet for a clean, protected look. It helps cover damaged or worn corners and improves the cabinet's appearance. What it does:

• Replaces a cracked, chipped or missing cabinet corner trim to restore a smooth finished edge
• Protects the cabinet corner from dings, moisture, and dirt buildup
• Improves cosmetic appearance by covering exposed cabinet edges
• Keeps adjacent panels aligned and reduces visible gaps around the cabinet corner

• Disconnect power to the appliance before working near electrical components
• Remove any damaged trim and clean the mounting area before installing the new piece
• Trim may snap into place or secure with screws/adhesive depending on model—use appropriate fasteners