Fghd4261kw1 Parts

This drawer roller allows your refrigerator's bin or crisper drawer to glide smoothly along its track. Replacing a worn or missing roller helps restore easy opening and closing and prevents drawers from sticking or binding.

• Supports the drawer as it slides on the rail/track
• Helps correct stiff, rough, or noisy drawer movement
• Can reduce uneven sliding or a drawer that pops off the track
• Common wear item when drawers are overloaded or used heavily

• Unplug the refrigerator before servicing
• Remove the affected drawer to access the roller
• Note roller orientation and reuse existing fasteners if applicable
• Test drawer travel after replacement to ensure smooth operation

This evap coil cover protects the evaporator and helps direct airflow for more consistent cooling. It replaces damaged or missing covers to reduce frost buildup, keep debris away from the coil, and help prevent interior leaks. What it does:

• Shields the evaporator coil from ice, debris and accidental contact to protect coil fins.
• Helps channel airflow across the coil for improved cooling performance.
• Can reduce frost accumulation and related moisture or dripping symptoms.
• When cracked or missing, you may notice increased frost, water in the cabinet, or reduced cooling.

• Always disconnect power to the appliance before servicing.
• Remove interior liners or access panels to reach the evaporator; handle coil fins and insulation carefully.
• Reinstall any mounting clips, grommets, or insulation exactly as removed to maintain fit and sealing.

This anti-twist pin secures mating parts to stop unwanted rotation and keeps linked components aligned for reliable operation. Replace a worn or broken pin to restore proper fit and reduce twisting, rubbing and noise. What it does:

• Keeps connected components from rotating or shifting, preserving alignment and part engagement.
• Helps prevent rubbing, scraping, or noisy operation caused by a loose or missing pin.
• Replaces a damaged or worn locating/retention pin that can allow assemblies to bind or move out of position.
• Simple mechanical replacement that restores intended part geometry and fit.

• Disconnect power to the appliance before servicing to avoid electrical or motion hazards.
• Remove any covers or panels as needed to access the pin; keep track of fasteners and orientation.
• Install the pin in the same orientation as the original; components move freely and are properly engaged before reassembly.

This support beam is a structural cabinet brace that stabilizes the refrigerator's interior frame and restores proper alignment of doors, drawers and shelves, helping reduce sagging, vibration and unusual noises. What it does:

• Reinforces the cabinet/frame so internal components stay square and aligned
• Helps prevent doors and drawers from sagging or binding
• Reduces rattling or vibration caused by a bent or missing brace
• Common symptom indicators: visible bend or gap, uneven door fit, or persistent noise from the cabinet area

• Disconnect power and remove food/contents from the affected area before starting any repair
• Basic hand tools typically required; follow the manufacturer's service manual for correct fastener torque and placement
• Handle carefully to avoid scratching the finish; inspect surrounding mounting points and replace damaged fasteners as needed

The Hinge Assembly is an OEM replacement part for Frigidaire refrigerators. It is the mechanism that allows the refrigerator doors to open and close properly. The hinge assembly consists of metal brackets, pins, and bushings that connect each door to the fridge cabinet and facilitate smooth swinging movement. 

Causes of a bad hinge assembly can include wear from years of operation, excessive weight on door racks damaging components, or damage if the refrigerator is moved improperly.  

Symptoms of a bad hinge assembly include:

• Doors that do not close or align securely  
• Gaps that compromise the refrigerator seal 
• Noisy or rough door movement
• Doors difficult to open, especially when full or heavy

As a major moving component, hinges can degrade over time. Replace with this genuine OEM part to restore proper door function for Frigidaire refrigerators. It fits models also compatible with Electrolux, Gibson, Kelvinator, and Kenmore designs.

This replacement latch mounting screw secures the refrigerator door latch assembly so the door closes and seals properly. Installing a fresh mounting screw restores a solid latch connection and reduces door movement or rattling. What it does:

• Fastens the door latch assembly to the cabinet or door frame
• Keeps the latch aligned so the door closes and seals correctly
• Prevents loose or wobbly latch hardware and related rattling noises
• Helps address symptoms like a door that won't stay latched or minor door play

• Turn off power to the appliance or unplug before working near electrical components
• Use the correct screwdriver and thread the screw straight to avoid stripping
• Do not overtighten — snug is sufficient to hold the latch without deforming parts
• Test the door operation after installation

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread fastener sized #8-32, 3/8-inch length
• Secures control housings, trims, covers, and support brackets per model design
• Replaces missing, worn, or corroded screws that cause loose or rattling parts
• Helps maintain alignment and stability after service

• Unplug the appliance; shut off water if applicable
• Match thread size to the original and start by hand to avoid cross-threading
• Use the correct driver; do not overtighten, especially into plastic
• Verify component alignment and operation after fastening

• Thread size: #8-32
• Length: 3/8 inch

Replacement cover that restores appliance appearance and protects internal components from dirt and damage. Installs in place of a worn, cracked or missing cover to keep controls and wiring safely concealed and the unit looking finished. What it does:

• Protects the control area and internal components from spills, dust, and accidental contact.
• Hides and secures wiring and mounting points to prevent snagging or tampering.
• Restores the appliance's finished look when the original cover is scratched, cracked, broken, loose, or missing.
• Helps reduce the chance of debris entering sensitive areas that can affect performance.

• One replacement cover.

• Disconnect power (unplug or shut off circuit breaker) before attempting any service.
• Basic hand tools are typically required; support the cover while removing fasteners to avoid dropped parts.
• Handle edges carefully to avoid cuts and to prevent scratching adjacent surfaces.
• Refer to the appliance's service manual or model-specific instructions for exact removal and reinstallation steps.

The Water Tube Kit is an OEM part for Frigidaire refrigerators. As an integral part of the ice maker system, the flexible tubing transports water from the external water supply to the internal ice maker assembly. 

Symptoms of a bad water tube kit include: 

• Slow or incomplete ice production when the ice maker is engaged
• Water leaks detected inside the refrigerator compartment  
• Disconnection between the external water source and ice maker assembly

Causes may involve cracked or split tubing from repeated flexing during years of use, degraded connectors coming loose from vibrations, or punctures from impact or rodent damage.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This electronic control board replaces the oven's main control module to restore user interface and timed bake/clock functions. It provides the control logic that manages heating cycles and display feedback for the range. What it does:

• Serves as the oven's primary control module, interpreting commands from the touchpad or knobs
• Controls bake/broil elements, timers, and display outputs through relay/signaling circuits
• Common symptoms: blank or unresponsive display, no heat or heating cycles won't start, or controls do not respond
• Replaces a failed or intermittent board that causes erratic oven behavior

• One electronic control board assembly

• Disconnect power at the breaker before beginning service to avoid shock or injury
• Handle the board carefully and avoid touching connector pins or components; static discharge can damage electronics
• Verify wire harness orientation and secure all connectors before restoring power.

The Hinge Assembly is an OEM replacement part for Frigidaire refrigerators. It is the mechanism that allows the refrigerator doors to open and close properly. The hinge assembly consists of metal brackets, pins, and bushings that connect each door to the fridge cabinet and facilitate smooth swinging movement. 

Causes of a bad hinge assembly can include wear from years of operation, excessive weight on door racks damaging components, or damage if the refrigerator is moved improperly.  

Symptoms of a bad hinge assembly include:

• Doors that do not close or align securely  
• Gaps that compromise the refrigerator seal 
• Noisy or rough door movement
• Doors difficult to open, especially when full or heavy

As a major moving component, hinges can degrade over time. Replace with this genuine OEM part to restore proper door function for Frigidaire refrigerators. It fits models also compatible with Electrolux, Gibson, Kelvinator, and Kenmore designs.

Replacement water tube that carries water to your refrigerator's dispenser and ice maker. Restores proper water flow and helps stop leaks or poor dispenser/ice maker performance when the original tube is damaged or clogged. What it does:

• Directs water from the inlet/fill valve to the dispenser and/or ice maker.
• Replaces cracked, split, or clogged tubing that can cause leaks or reduced water flow.
• Helps address symptoms such as visible leaks, no water from the dispenser, or an ice maker that won't fill.
• Fits inline with existing fittings and clamps.

• Shut off the refrigerator power and water supply before beginning work.
• Remove necessary panels or shelving for access; handle tubing and fittings carefully to avoid damage.
• Inspect and replace any worn clamps, gaskets, or fittings.
• After installation, restore water and power, check all connections for leaks, and run the dispenser/ice maker to confirm proper operation.

The Air Tower is an OEM part for Frigidaire refrigerators. It is responsible for distributing cold air throughout the refrigerator compartment.

A bad air tower can be caused by blockages, damage, or wear and tear over time. Signs of a faulty assembly include improper cooling, uneven temperature distribution, or frost buildup.

Symptoms of a bad air tower include:

• Inconsistent cooling 
• Frost accumulation 
• Poor temperature regulation

Replace your damaged or malfunctioning air tower with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This replacement door gasket seals the freezer compartment to help keep cold air in and warm air out, improving temperature stability and energy efficiency. It restores a tight seal for effective cooling and frost control. What it does:

• Creates an airtight seal around the freezer door to prevent cold air loss
• Helps reduce frost buildup and maintain consistent internal temperatures
• Can improve cooling performance and reduce run time from air leaks
• Common symptoms: visible gaps, torn or deformed gasket, frost buildup, or higher-than-normal appliance run time

• Remove the old gasket and clean mounting surface of dirt and old adhesive before installing
• Start at one corner, align the gasket, and press into the door channel evenly for a full seal
• Some gaskets seat better after a short warm water soak or gentle stretching—follow OEM guidance
• If magnets or mounting clips are present, confirm they are engaged.