Fghf2366-Pf3 Parts

Replacement shaft bushing that supports and reduces wear on a rotating shaft or pivot, helping restore smooth, quiet movement and reduce wobble where the original bushing has worn or failed. What it does

• Provides a low-friction bearing surface for a rotating shaft or pivot to prevent metal-on-metal wear.
• Restores proper alignment and reduces shaft wobble that can cause noise or uneven operation.
• Helps stop squeaks, grinding, or rough movement caused by a worn or damaged bushing.
• Protects housing and shaft from accelerated wear by keeping components centered.

• Disconnect power or unplug the appliance before beginning any repair.
• Remove access panels and any fasteners needed to reach the worn bushing; support the shaft while removing the old bushing.
• Inspect the shaft and mating surfaces for wear or damage and clean before installing the new bushing.
• Press the new bushing into place gently and evenly; avoid excessive force. Reassemble and test operation before returning the appliance to service.

This lower door hinge restores proper pivot and alignment so a refrigerator or freezer door opens and closes smoothly. It replaces a worn or damaged hinge to reduce sagging and improve the door seal. What it does:

• Supports the bottom of the appliance door and provides the pivot point for opening and closing
• Corrects door sag, uneven gaps, and misalignment that can prevent the door from sealing
• Reduces rubbing, catching, or scraping when the door moves
• Helps maintain proper door alignment to protect the gasket and improve cooling efficiency

• One lower door hinge

• Always unplug the appliance or disconnect power before beginning repairs
• Support the door fully before removing hinge fasteners; door may be heavy—use a second person or support stand
• Keep track of mounting hardware and any shims/plates for reassembly; tighten screws securely but do not overtighten

This freezer drawer bracket secures and supports the freezer drawer, keeping it aligned and stable for smooth operation. It replaces a worn or broken bracket to stop drawer sagging and misalignment. What it does:

• Holds the freezer drawer in place and supports the drawer track
• Restores proper drawer alignment for smooth opening and closing
• Helps eliminate drawer sag, catching, or uneven movement
• Works with factory mounting points to maintain intended fit

• Disconnect power before starting and remove food from the drawer area
• Remove the drawer and any trim panels to access the bracket mounting screws
• Reuse original fasteners unless specified otherwise; align bracket before tightening

This stop is a small mounting hardware component that positions and limits movement of a nearby part, helping keep doors and panels aligned and preventing overtravel. It's a simple replacement that restores correct stopping action. What it does:

• Provides a fixed contact point to stop or limit movement of a door, panel or linkage
• Keeps parts aligned and prevents banging or overtravel
• Worn or broken stops can cause rubbing, misalignment, or noisy operation
• Restoring the stop often eliminates play and improves fit and function

• Disconnect power or unplug the appliance before starting any repair
• Remove any panels or trim needed to access the mounting location
• Replace the stop using the original fastener(s); hand-tighten then secure as needed

The air filter housing covers and protects the air filter.

This upper hinge cover protects and finishes the refrigerator door hinge area on the right side, restoring appearance and helping keep hinge components free of dust and debris. Designed as a direct replacement for the OEM right-side hinge cover. What it does:

• Covers the upper door hinge area to improve cosmetic appearance and hide hardware
• Helps keep dust, crumbs, and moisture away from hinge components
• Prevents accidental contact with hinge edges while opening and closing the door
• Restores the original look after hinge repairs or replacements

• One upper hinge cover for the right (RH) side, gray

• Disconnect power to the appliance or unplug before servicing to prevent electrical hazards
• Handle carefully to avoid scratching the finish; align clip/fastener locations before snapping into place

This door gasket seals the refrigerator door to help maintain proper temperature and reduce energy loss. It replaces a worn, torn, or compressed seal to improve cooling performance and food safety. What it does:

• Creates an airtight seal between the door and cabinet to keep cold air in and warm air out
• Helps prevent frost build-up and reduces moisture inside the compartment
• Can stop visible gaps that allow warm air and odors to enter
• Restores consistent temperatures for better food preservation

• One refrigerator door gasket

• Handle gently to avoid stretching or tearing; follow the appliance manufacturer's alignment and fastening steps
• Clean the door flange and gasket channel before installation for a proper seal
• Some gaskets require heating (hair dryer) or a short break-in period to fully seat; follow your model's instructions

This replacement door gasket seals the refrigerator compartment to keep cold air in and warm air out, helping maintain consistent temperatures and reduce energy use. It fits along the cabinet opening and forms the primary seal between door and cabinet. What it does:

• Creates an airtight seal to help maintain internal cooling and reduce compressor runtime
• Prevents warm, moist air from entering and causing frost build-up or condensation
• Helps keep food fresher by maintaining stable temperatures
• Common symptom: visible cracks, gaps, or torn edges around the door perimeter
• Common symptom: warm spots inside the fridge, excessive frost, or higher energy use

• Unplug or disconnect power to the appliance before starting any repair
• Remove the old gasket and clean the sealing surface thoroughly before installing the new gasket
• Some installations require basic hand tools; check the appliance's service guide for detailed steps
• If adhesive or clips are used, follow OEM instructions

This replacement basket trim restores the finished edge and secure fit of a dishwasher basket, helping prevent rubbing and keeping dishes positioned for proper cleaning. It replaces worn or cracked trim for a neater, safer rack. What it does:

• Covers and protects the edge of a dishwasher basket to reduce wear and snagging
• Helps keep the basket aligned and items from catching on the rack
• Restores a finished appearance to a worn or damaged basket edge
• Simple, passive part that prevents small movement and chipping of dishware

• One basket trim piece

• Disconnect power and water to the appliance before starting any repair
• Most trims snap or slide onto the basket; remove the rack to access the damaged area
• Use basic hand tools if clips or screws are present; avoid forcing parts to prevent breakage
• If clips are broken, inspect neighboring fasteners and replace as needed for a secure fit