Fghn2844lf Parts

This inner oven door glass replaces a cracked or cloudy panel and restores a clear view into the oven while helping maintain heat inside the cavity. Fits models that use the original OEM inner door glass panel. What it does

• Replaces damaged or broken inner oven door glass to restore visibility and containment
• Reduces heat loss by restoring the proper door seal and insulation area
• Helps prevent contact with hot oven components when installed correctly
• Useful when glass is cracked, chipped, or severely scratched and affecting appearance or function

• Requires removal of the oven door; for safe disassembly steps
• Handle with care—wear gloves and eye protection to avoid cuts from broken glass
• Inspect door clips, seals, and screws and replace any damaged hardware before reassembly

This grille clip is a small plastic retainer that secures a refrigerator grille or trim piece to the cabinet, keeping the front panels aligned and preventing rattles or gaps for a tidy appearance. What it does:

• Secures the lower/front grille or trim to the appliance cabinet to hold it in place
• Prevents grille movement, rattling, or sagging that can occur with worn clips
• Helps maintain a tight fit between trim and cabinet for a finished look
• Simple replacement part when existing clip is cracked, broken, or missing

• One grille clip

• Typically snaps into place; inspect mating slot and clip orientation before installing
• Replace any damaged adjacent clips for even support and fit
• Work carefully to avoid damaging the grille or surrounding trim

This molded evaporator cover replaces the plastic trim that protects and directs airflow over the freezer evaporator; it helps maintain even cooling and keeps ice and debris away from the coil assembly. Fits the OEM mounting locations for a proper seal. What it does

• Protects the evaporator coil from loose food and debris that can impede airflow.
• Directs cold air through the freezer compartment for more consistent temperatures.
• Helps reduce frost build-up on the evaporator by maintaining proper airflow patterns.
• Restores proper fit and appearance where the original cover is cracked, warped, or missing.

• One evaporator cover

• Disconnect power to the appliance before starting any repair.
• Remove screws or fasteners holding the old cover; handle tabs carefully to avoid breaking mounting clips.
• Defrost and dry the area if there is ice buildup before installing the new cover.
• Reassemble panels and verify there are no gaps that could allow air leaks or contact with moving components.

This housing is the replacement cabinet housing that provides structural support and protects internal components, restoring proper fit and appearance. It helps stabilize assemblies and keeps wiring and parts shielded from damage. What it does:

• Replaces a cracked, broken, or dented cabinet housing to restore structural integrity
• Protects internal components and wiring from debris and accidental contact
• Helps reduce rattling or movement caused by damaged housing
• Restores the appliance's proper fit and alignment for panels and doors

• One housing

• Disconnect power to the appliance before starting any repair
• Use appropriate hand tools; support adjacent panels to avoid stress on clips or fasteners
• Watch for sharp edges; wear gloves and eye protection

This replacement rear compressor base roller supports the refrigerator compressor on the cabinet rear base, helping keep the compressor properly seated and reducing wear from vibration and movement. What it does

• Provides a rolling support under the compressor to keep it aligned and off the cabinet floor
• Helps reduce vibration and rattling that can occur from a loose or worn compressor mount
• Prevents compressor body from dragging or scraping the cabinet base
• Commonly replaced when the roller is cracked, worn flat, missing, or causing noise

• Disconnect power to the appliance before starting any work
• Support or secure the compressor and cabinet before removing the old roller to avoid sudden movement
• Basic hand tools usually required; inspect mounting hardware and replace any damaged fasteners
• Do not attempt sealed-system repairs.

This rubber compressor mounting grommet cushions and isolates the compressor to reduce vibration and noise that can transfer to the cabinet. It helps maintain stable compressor positioning for quieter, smoother operation. What it does:

• Absorbs compressor vibration to lower noise and rattling
• Dampens movement that can cause abrasion or wear on mounting hardware
• Helps maintain proper alignment of the compressor assembly
• Common symptom: excessive buzzing, vibration, or rattling from the back of the appliance

• Always disconnect power to the appliance before servicing.
• Support the compressor before removing mounts to prevent shifting or damage.
• Inspect surrounding mounts and hardware; replace any worn or damaged pieces.

A single replacement mounting screw used to secure trim, panels, or components on compatible Frigidaire appliances. Restores a lost or stripped fastener so panels and parts sit firmly and safely. What it does

• Secures trim pieces, control panels, brackets, or small appliance components
• Replaces missing or damaged screws that cause loose or rattling parts
• Helps restore proper alignment so doors and panels close and seal correctly
• Useful when reassembling after maintenance or part replacement

• Inspect matching hole and threads; replace with like-size screw to avoid damage
• Use correct screwdriver or driver bit to prevent stripping the head
• Do not overtighten; snug until secure
• Disconnect power to the appliance before accessing internal panels or components

This condenser tube spacer positions and secures the refrigerator's condenser tubing to maintain proper tube spacing and airflow. Replacing a worn or broken spacer helps reduce vibration, rattling, and rubbing that can damage tubing over time. What it does:

• Holds condenser tubing in the correct position to preserve airflow and cooling efficiency
• Cushions tubing to limit vibration and reduce rattling noises
• Prevents tubing from rubbing against the cabinet or other components, lowering wear risk
• Helps reduce the chance of tubing fatigue that can lead to damage

• Disconnect power to the appliance before accessing rear panels or condenser components.
• Handle condenser tubing gently; avoid kinking, bending, or putting stress on lines during installation.
• Installation may require removing the back or lower access panel to reach the condenser assembly.

A replacement bushing that supports a rotating shaft and reduces wear between moving metal parts, restoring smooth, quiet operation. Fits OEM specification to ensure proper alignment and long-lasting performance. What it does:

• Cushions and guides a rotating shaft or drum to prevent metal-on-metal contact
• Reduces noise, vibration, and wobble caused by worn support surfaces
• Helps maintain proper shaft/drum alignment for even operation
• Limits premature wear to adjacent bearings, seals, and housing

• One bushing

• Disconnect power before starting any repair and follow OEM disassembly instructions
• Replacement typically requires access to the motor/shaft or drum housing; some disassembly may be necessary
• Inspect adjacent bearings and seals and replace if worn to prevent repeat failures

This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:

• Secures panels, trim, or internal components to maintain proper alignment and stability.
• Stops rattling or vibration caused by loose or missing hardware.
• Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
• Small hardware solution for common fit and finish issues.

• Disconnect power and any water supply before starting work.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Keep track of small parts and work on a stable surface; magnetic trays help.

Hex washer head ,10-32 x 0.375. Ground

This replacement screw secures select refrigerator door handles to the door. A worn or missing screw can leave the handle loose or detached, making the door difficult to open and potentially stressing other components.

• Holds the door handle firmly to the door
• Helps restore proper door operation and safe grip
• Designed to fit designated mounting points for compatible models

• Unplug the refrigerator before beginning work
• Open the door to access the handle mounting points
• Use the correct screwdriver/Allen tool to avoid stripping the head
• Start threads by hand and tighten snugly—do not overtighten

This is a replacement screw used to secure panels, trim and other appliance components to restore proper fit and reduce rattling. It matches the OEM part form and fastening function for compatible Frigidaire appliances. What it does:

• Secures panels, brackets or trim to maintain proper alignment and appearance
• Replaces missing, stripped or damaged screws that cause loose parts or vibration
• Helps prevent rattling and keeps components seated for safe operation
• Restores original fastening where a worn or corroded screw failed

• Disconnect power to the appliance before beginning any repair to avoid electrical hazard
• Use the correct screwdriver or driver bit and hand-start threads to avoid cross-threading
• Tighten until snug; avoid overtightening which can strip threads or damage panels
• If thread damage is present, replace with the correct OEM fastener (do not force)

Replacement screw used to secure trim, brackets and panels on compatible Frigidaire appliances. Restores proper fit to reduce rattling and keep components from coming loose for safer, more reliable operation. What it does

• Secures panels, trim pieces and small brackets so parts stay aligned and flush.
• Stops rattling or vibration caused by missing or loose fasteners.
• Prevents components from shifting or falling out during normal use.
• Works wherever the OEM screw specified by the appliance diagram is required.

• Disconnect power (and water, if applicable) before starting any repair.
• Use the correct driver and size to avoid stripping the head or threads.
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic.
• If the new screw does not seat properly, confirm this is the correct OEM part before forcing it.

This is a replacement screw fastener used to secure panels, trim, or components on compatible Frigidaire appliances. It restores proper fit and prevents rattling or loose parts for safe, reliable operation. What it does:

• Secures panels, brackets, or trim pieces to keep components aligned and stable
• Prevents rattling, vibration noise, and gaps caused by missing or loose fasteners
• Restores proper assembly after service or part replacement
• Helps maintain safety by keeping covers and guards firmly attached

• One screw (single fastener)

• Disconnect power or unplug the appliance before servicing
• Use the appropriate driver to avoid stripping the head; do not overtighten
• Verify the screw matches the original in length and thread before installing