Fgmc2766k Parts

A push-button door switch that tells the appliance when the door is open or closed so lights, fans, or controls respond correctly. Replaces a worn or broken door-actuated switch to restore normal operation and interior lighting. What it does:

• Detects door open/closed position to control interior lights or related circuits
• Stops lights from staying on when the door is closed, preventing unnecessary power use
• Restores proper cycling of door-dependent functions and controls
• Commonly used when lights fail to turn on/off or when door-operated features are intermittent

• One replacement push-button door switch

• Disconnect power before servicing to avoid shock or damage
• Access typically requires removing interior trim or the light housing—keep fasteners for reassembly
• Verify switch orientation and terminal connections match the original before connecting

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

This hex flange nut secures components where a broader bearing surface is needed to resist loosening and distribute load. It fits 10-32 threaded studs and is used on fastened assemblies in appliances. What it does:

• Provides a secure threaded connection for 10-32 screws and studs
• Flange spreads clamping force to reduce panel or bracket damage
• Hex shape allows tightening with a wrench for a reliable hold
• Commonly replaces worn or missing nuts that cause loose panels or rattling

• One hex flange nut

• Use the correct 10-32 screw or stud and hand-start threads to avoid cross-threading
• Tighten with an appropriately sized wrench; do not overtighten to prevent thread or part damage
• Disconnect power and follow appliance safety instructions before servicing
• Replace only like-for-like; confirm size and thread match your application

This mounting bracket secures appliance components in place to restore stable operation and alignment. It's a simple, durable replacement that helps prevent loose parts and rattling for safer, quieter performance. What it does:

• Provides structural support for internal components and assemblies
• Holds panels, modules or hardware in correct alignment to prevent movement
• Helps eliminate rattling, vibration noise, or loose-fitting parts
• Restores proper fit where a worn or broken bracket allowed misalignment

• Turn off power to the appliance and unplug before beginning work
• Remove only the panels or fasteners necessary to access the old bracket
• Reuse original fasteners or replace with equivalent-size hardware; tighten securely

This spacer positions and supports components to maintain proper alignment and clearance in the appliance. It prevents rubbing and ensures panels or parts sit correctly for reliable operation. What it does:

• Keeps panels, brackets or assemblies spaced correctly to prevent contact and wear
• Restores proper alignment to reduce vibration, noise or rubbing symptoms
• Maintains clearance for airflow or moving parts where specified
• Provides a stable mounting point for adjacent components

• One spacer

• Install in the location shown in the service diagram and secure with the original fasteners
• Disconnect power to the appliance before beginning service to avoid shock or injury
• If the original spacer shows damage or distortion, replace it to restore correct fit

This replacement refrigerator water filter cartridge helps restore clean tasting water and ice by trapping common impurities. Designed as a direct-fit replacement to maintain your fridge's filtered water supply and improve taste clarity. What it does:

• Filters particulates and common contaminants to improve water and ice taste
• Helps reduce visible sediment and cloudiness from the dispenser and ice maker
• Restores normal dispensing performance when an old filter causes off-flavors or odors
• Supports consistent filtered water flow when installed and maintained

• Turn off the water supply and follow the refrigerator's filter-replacement instructions before starting
• Push/rotate or slide per your model's procedure until the filter locks in place; ensure a secure seal
• Run water through the dispenser for a short time after installation to flush air and initial carbon fines
• Replace regularly per the refrigerator manufacturer's recommendation or sooner if flow decreases or taste returns

This cover is a protective trim piece that shields and neatly finishes exposed components on your appliance. Replacing a cracked or missing cover restores protection and a clean, factory look while helping prevent accidental contact with internal parts.

• Conceals and protects wiring, mechanisms, or mounting hardware from dust and incidental contact
• Restores proper fit and finish for a clean appearance
• Helps ensure components remain secured and unobstructed
• Common symptoms include cracks, broken tabs, discoloration, or a missing/loose cover

• Disconnect power before servicing; shut off water supply if working near water lines
• Retain and reuse original screws or clips; transfer any clips from the old part if applicable
• Align tabs/slots and secure without overtightening to avoid damage
• The cover sits flush and doesn't interfere with doors, drawers, or moving parts

The Range Lamp Assembly is an OEM part for Frigidaire stoves and ranges. It consists of the halogen light bulb, lens cover, and wiring harness necessary to illuminate the oven cavity. This lamp assembly provides light to the cooking and baking space, making it easier to view food and monitor cooking progress.  

Symptoms of a bad range lamp assembly include:

• The oven light not turning on at all  
• Dim, flickering, or intermittent light
• Burned out or blown light bulb
• Cracks or damage to the lens cover

Causes of failure can be a burned out light bulb, broken wiring, or damage from impact or heat over time. 

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This thermostat is a temperature-sensing switch that helps your appliance maintain the set temperature by opening and closing the circuit as conditions change. Replacing a weak or failed thermostat restores consistent cycling and stable performance. What it does:

• Monitors temperature and opens/closes its electrical contacts to control the circuit
• Helps the unit cycle on and off to maintain an even, target temperature
• A failed thermostat may cause temperature swings, short/long cycling, constant running, or no cycling at all

• 1 thermostat

• Disconnect power (and gas, if applicable) before servicing
• Access the thermostat location per your model; note wire positions and transfer any brackets/insulators from the original
• Make secure wire connections and route leads away from sharp, hot, or moving parts
• Reassemble covers, restore power, and verify proper cycling and temperature regulation

Replacement water-line tube that routes water inside the refrigerator to the ice maker or dispenser, helping restore proper water flow and reduce leaks. Designed to match factory routing so the line fits and seals correctly at the connections. What it does:

• Carries water from the cabinet valve to the ice maker or dispenser.
• Restores normal dispenser flow and ice production when the tube is cracked, pinched, or clogged.
• Helps stop visible leaks or pooling caused by damaged or misrouted tubing.
• Matches factory bends for correct routing and clearance behind panels.

• Disconnect power and shut off the water supply before starting any work.
• Remove shelves or panels as needed for access; watch for sharp edges.
• Check and replace any worn clamps or fittings; tighten connections and test for leaks with water on before reassembling.

This replacement lever is the small actuator that engages control linkages so doors, latches or dispenser mechanisms move and stay in position. Replacing a worn or broken lever restores reliable mechanical operation and alignment. What it does:

• Transfers motion from a handle or control cam to the linked mechanism
• Helps door/latch/dispenser engage and stay in the correct position
• A damaged or cracked lever can cause sticking, poor latching, or intermittent operation
• Commonly fails from wear, impact, or plastic fatigue

• Disconnect power to the appliance before beginning work to avoid injury
• Removal typically requires basic hand tools; keep fasteners for reuse
• Handle small plastic parts carefully to avoid damage during installation
• Test the mechanism through a full cycle after installation to ensure proper engagement

This Tube Assembly routes water inside the refrigerator to the dispenser and ice-maker, restoring proper water flow and preventing leaks when the original line is damaged. Reliable replacement for delivery and fill connections. What it does:

• Transports water from the inlet to the ice maker/dispenser assembly
• Replaces cracked, kinked, or leaking tubing that causes puddles or low water flow
• Helps restore normal ice production and dispenser operation when the tube is the fault
• Matches OEM routing and connector types for correct fit and seal

• One tube assembly as shown

• Disconnect power and shut off the water supply before starting
• Remove ice maker or access panel as needed to reach routing; follow OEM service instructions
• Inspect fittings and replace any damaged clamps or seals; avoid kinking the new tube
• After installation, turn on water, check for leaks, and run dispenser/ice cycles to confirm proper flow