Fgp305kw1 - Roper Parts

This factory fastener secures appliance panels, brackets, and internal components so everything stays aligned and quiet. Replacing a missing or damaged screw restores a tight fit and helps reduce vibration, rattles, and wear.

• Fastens metal or plastic parts to the cabinet/frame
• Maintains alignment of covers, ducts, housings, and brackets
• Replace if the head is stripped, threads are worn, or hardware is missing
• Symptoms can include loose or misaligned panels, rattling/vibration noises, or parts that won't stay secured

• Disconnect power and shut off gas/water before service.
• Match the screw to the original location and reuse existing holes/mounts.
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening.
• Use the correct driver bit to prevent stripping the head.

This appliance screw secures panels, brackets, and internal components. Replacing a stripped or missing screw keeps parts tight and aligned, reducing vibration and preventing noise for reliable day-to-day operation.

• Secures mounting points for panels, brackets, or assemblies
• Replaces stripped, rusted, or missing hardware to restore a solid attachment
• Helps reduce rattling, vibration, and misalignment from loose fasteners
• Maintains proper fit so components operate as intended

• Disconnect power; turn off water or gas before service
• Match the screw to its original location and replace one at a time
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver type/size specified for your model

Almond. Size: 13 oz. can. Acrylic appliance paint.

Factory replacement screw that secures appliance components and hardware. Use it to replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and help prevent loosening or damage from vibration.

• Fastens brackets, panels, or internal parts at the original mounting points
• Replaces worn or missing hardware to correct loose or misaligned components
• Helps reduce vibration-related noise and movement
• Matches the original thread and length specified for the application

• Disconnect power; shut off water or gas if applicable before servicing
• Compare to the original for thread and length match before installation
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• Reuse any original spacers/washers if present; replace if damaged

Replacement door handle that restores a secure grip and smooth opening for compatible Whirlpool appliances. Designed to match factory fit and mounting locations to replace cracked, loose, or damaged handles. What it does:

• Provides a sturdy grip for opening and closing the appliance door.
• Replaces cracked, broken, bent, or loose handles that interfere with normal use.
• Matches factory mounting points for a secure, stable replacement.
• Restores function and helps prevent further wear around the door edge.

• Typical installation uses common hand tools (screwdriver or hex driver); follow manufacturer diagrams for correct orientation.
• Disconnect power or unplug the appliance before working near electrical components or sealed areas.
• Align handle over mounting posts, install fasteners securely, and avoid overtightening to prevent damage.

Color: Almond

Color: White. Size: 2 oz. can. Porcelain touch-up paint.

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

This sheet-metal pan-head screw secures appliance panels, brackets, and components to the cabinet or frame. Replacing a missing or damaged screw restores a tight fit and helps stop rattles, misalignment, and loosening.

• Fastens sheet-metal panels, covers, ducts, and brackets to the appliance chassis
• Helps keep components aligned and secure during operation
• Replace if the original is missing, rusted, stripped, or damaged
• Common symptoms: loose or vibrating panels, gaps or misaligned parts, hardware that won't tighten

• Disconnect power; shut off gas or water supply before servicing
• Support the panel or part being attached; hand-start threads to avoid cross-threading
• Use the correct driver bit; tighten snugly but do not overtighten into sheet metal
• If multiple matching screws secure a part, consider replacing them as a set for consistent hold

This is a standard replacement thermostat knob for ranges and ovens that restores manual temperature control and provides a secure, easy-grip interface. It replaces a cracked, faded, or missing knob so you can set heat levels reliably. What it does:

• Fits over the oven/range temperature control shaft to allow user adjustment of heat settings.
• Replaces knobs that are cracked, stripped, loose, or missing and won't turn properly.
• Restores a positive tactile grip for accurate setting selection.
• Matches original control ergonomics for intuitive operation.

• One thermostat knob

• Disconnect power to the appliance before servicing to avoid electrical or burn hazards.
• Most installations are push-on: pull the old knob straight off the control shaft and push the new knob on until seated.
• If the knob is retained by a set screw or adapter, retain or reinstall the screw/adapter as originally configured.
• Do not force the knob; verify correct shaft orientation and fit before applying pressure.

This is a replacement screw used to secure panels, trim, or small components on compatible Whirlpool appliances. Installing the correct fastener restores proper fit and helps stop rattles or loose trim. What it does:

• Secures trim, panels, or control components to prevent movement and rattling
• Replaces missing or damaged hardware that can cause gaps or loose parts
• Helps maintain proper alignment of panels and movement-free operation
• Used wherever a factory screw of this size and head style is specified

• Always disconnect power (and water, if applicable) before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Install by hand until threads engage, then tighten snugly—do not overtighten
• Keep removed hardware organized before final reassembly

Color: Black. Includes two double grates.

The Oven Liner Touch Up Paint is an OEM part for Whirlpool ovens. This 2 oz warm white touch-up paint is designed to cover minor scratches, chips, and blemishes on the oven liner, restoring its appearance and protecting it from further damage. 

Causes of a bad oven liner include exposure to high temperatures, accidental impacts, and abrasive cleaning materials, which can lead to scratches, chips, and discoloration. Over time, these imperfections can worsen, making it necessary to use touch-up paint to maintain the oven liner’s integrity.

Symptoms of a bad oven liner include:

• Visible scratches or chips on the oven interior
• Discoloration or fading of the liner
• Increased difficulty in cleaning the oven liner
• Potential rust or corrosion in affected areas

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures appliance panels, brackets, and components. Using the specified #10-16 x 1/2-inch fastener restores a tight, rattle-free fit and helps prevent vibration, misalignment, and premature wear when a screw is missing, stripped, or damaged.

• Provides a secure mechanical connection at designated mounting points
• Replaces missing, rusty, or stripped screws
• Helps eliminate loose panels, gaps, and rattles
• Maintains alignment of covers, trim, and brackets

• Disconnect power and shut off gas/water before servicing
• Support the part being fastened to avoid misalignment
• Start threads by hand to prevent cross-threading; tighten snugly—do not overtighten
• Reinstall only in locations specified for this size screw

Note: This part is one screw, order quantity needed.

This clip secures the oven's bottom panel to the range chassis so the floor of the oven stays properly seated during cooking and cleaning. Replacing a missing or bent clip stops rattles and keeps the panel locked in place. What it does:

• Holds the oven bottom panel securely in position
• Helps prevent the panel from lifting, shifting, or rattling
• Restores proper fit after cleaning or service
• Replace if the clip is missing, bent, or broken

• 1 clip

• Disconnect power and allow the oven to cool completely; shut off gas supply for gas models
• Remove oven racks and the bottom panel per your model's instructions
• Install the clip at the designated mounting point and ensure the panel edge seats under the clip
• Wear cut-resistant gloves; sheet-metal edges can be sharp