Fgsc2335tf9 Parts

This coil cover seal is a molded gasket that fits around the evaporator/coil cover to help keep airflow directed and reduce moisture and frost buildup. It restores the cover's sealing surface for more consistent cooling performance. What it does:

• Seals the evaporator/coil cover to help maintain proper airflow through the coil
• Helps reduce frost or ice buildup by keeping moist air away from cold coil surfaces
• Can prevent water dripping or pooling inside the cabinet near the coil
• Restores a tighter seal after a cracked, torn, or compressed gasket reduces effectiveness

• Disconnect power to the appliance before starting any repair
• You may need to remove the evaporator/coil cover or access panel to reach the seal
• Clean the mating surfaces and dry thoroughly before installing the new seal
• Handle the gasket gently and press evenly to seat; avoid stretching or sharp tools that could damage the part

This defrost drain pan collects water from the refrigerator's automatic defrost cycle and channels it safely to the evaporator area for evaporation, helping prevent leaks and water pooling beneath the appliance. What it does:

• Collects and channels defrost water away from the freezer/refrigerator cabinet
• Prevents water from pooling under the unit, which can cause floor damage or odor
• Helps proper evaporation of defrosted water at the compressor/evaporator location
• Reduces risk of ice build-up from standing water in the cabinet

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove lower access panels or kickplate to reach and replace the pan
• Inspect and clear the drain tube and heater while replacing the pan for best results
• Handle gently to avoid bending or cracking the pan

This lower kickplate grille covers the refrigerator's toe-kick opening to protect components and finish the appliance's front. It restores appearance and maintains proper airflow through the cabinet bottom. What it does:

• Covers and protects the lower front area and components behind the toe kick
• Helps direct airflow under the cabinet where condenser/venting passages are located
• Replaces cracked, broken, bent, or missing lower grille pieces that leave the opening exposed
• Restores a finished look to the appliance front

• One lower kickplate grille

• Disconnect power to the appliance before starting any work
• Remove the old kickplate by releasing retained clips or fasteners, then align and secure the replacement
• Use gentle pressure to avoid bending the grille or damaging adjacent finishes
• Replace with OEM-specified hardware

This genuine replacement screw secures appliance components and restores proper fit and stability. Use it to replace a missing or damaged fastener and stop panels, trim, or parts from shifting or rattling during normal use. What it does:

• Fastens and holds panels, brackets, or small components in place
• Restores secure attachment when an original screw is missing, damaged, or stripped
• Helps eliminate vibration, rattling, or loose-fitting parts
• Matches the OEM fit and function for reliable reassembly

• Use correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and remove food or contents from appliance areas as needed before servicing
• If fastener threads are damaged, replace with the exact OEM screw rather than forcing installation

The Condenser Coil is an OEM part for Frigidaire refrigerators. The condenser coil works to expel heat from inside the refrigerator and transfer it to the outdoor condenser unit. Proper functioning of the condenser coil is vital for cooling efficiency and maintaining the desired temperatures inside the refrigerator and freezer compartments.

Causes of a bad condenser coil can include a buildup of dirt and dust over time obstructing airflow, or physical damage from handling that compromises the coil integrity.

Symptoms of a bad condenser coil include:

• Inefficient or ineffective cooling
• Higher compressor run times and electricity usage
• Fluctuating interior temperatures
• Frost or ice buildup in unusual areas
• Unusual noises from the refrigeration system

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is a replacement electrical plug used to reconnect a wiring harness to an appliance component, restoring a secure electrical connection and helping stop intermittent power loss or component failure. What it does:

• Provides a secure electrical connection between wiring and the appliance component
• Replaces a cracked, burned, or loose plug that can cause intermittent operation
• Helps restore power to the affected component when failure is due to a faulty connector
• Prevents arcing or poor contact that can lead to overheating or component malfunction

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle wiring and terminals carefully; do not force connectors into place
• If wiring or terminals are damaged, repair or replace them rather than relying solely on a new plug

This gray, magnetic freezer door gasket seals the perimeter of the door to keep cold air in and moisture out, helping maintain proper temperatures and reduce frost buildup for dependable food preservation.

• Forms an airtight magnetic seal between the freezer door and cabinet
• Helps stabilize internal temperature and humidity to limit frost and ice
• Common signs of failure: cracks or warping; condensation around the door; frost near the gasket; door not closing flush
• Restores sealing performance when the original gasket hardens or shrinks

• Unplug the refrigerator before servicing; use caution around sharp edges
• Warm the new gasket (warm water or low heat) to make it pliable
• Seat corners into the door retainer first, then work along the sides for an even fit
• Verify an even seal all around (dollar-bill test) and adjust gasket or door alignment as needed

This dairy door is the flip-up cover for the refrigerator's dairy compartment on the fresh-food door. It keeps butter and cheese covered and contained, restoring a clean, finished look when the original cover is cracked or missing.

• Covers the dairy compartment and hinges open for easy access
• Helps keep small dairy items contained and organized on the door
• Replaces a cracked, warped, discolored, loose, or missing cover
• Closes properly when seated on the original hinge posts

• Disconnect power before servicing
• Remove the old cover by releasing its tabs from the hinge posts
• Align the new cover with the hinge posts and press to snap into place
• Avoid forcing brittle plastic; allow the part to reach room temperature before installation

This replacement freezer shelf restores a sturdy, level surface in the freezer compartment, helping you organize and support frozen foods safely. Replace a broken or missing shelf to regain capacity and neat, reliable storage.

• Provides a flat, stable surface for frozen items
• Seats securely on the factory shelf supports for proper fit
• Helps maintain intended spacing and airflow between levels
• Typical symptoms: cracked or broken shelf, sagging, won't sit level, or missing

• Disconnect power before working inside the appliance
• Remove food items and the old shelf; retain any reusable supports
• Align the new shelf with side rails or ledges and slide/settle into place
• Ensure the shelf is fully seated before reloading and avoid overloading

This water fill cup directs the incoming water from the valve into the ice maker mold so the ice tray fills cleanly. It helps restore reliable ice production by guiding water where it's needed and reducing spills. What it does:

• Funnels water from the fill valve into the ice maker mold for even fills
• Prevents water from splashing or leaking inside the ice maker cavity
• Helps stop underfilled or overflowing ice trays that cause poor ice production
• Works with the ice maker's fill cycle to maintain consistent ice sizes

• One fill cup

• Disconnect power to the refrigerator and shut off the water supply before starting
• Handle the cup gently; align tabs/slots and press into place until it snaps securely
• Inspect and replace any worn seals or gaskets you encounter during installation

This glass shelf assembly replaces a damaged or missing refrigerator shelf to restore stable storage and contain spills. It gives a level surface for deli items, produce, and containers while keeping the interior organized. What it does:

• Provides a sturdy glass surface for storing food and containers
• Helps contain spills and makes cleanup easier
• Restores proper spacing and support for refrigerator items
• Replaces cracked, chipped, or missing shelves to improve safety and usability

• Handle the glass with care and wear cut-resistant gloves during installation
• Align shelf edges with cabinet tracks or supports and slide into place until fully seated
• Do not force the shelf; check for proper fit and level before loading
• Avoid overloading; distribute weight evenly and do not place hot items directly on the glass