Frfs282laf1 Parts

This light assembly provides interior refrigerator illumination so you can see food and settings clearly. It restores a working interior lamp and replaces broken, cracked, or non-lighting housings for safer, more convenient use. What it does

• Houses the interior lamp and socket to deliver overhead illumination inside the fresh food compartment
• Restores lighting when the fixture is cracked, loose, scorched, or the lamp fails to come on
• Ensures proper mounting and alignment of the bulb for consistent light coverage
• Helps prevent accidental contact with the bulb and protects wiring inside the compartment

• One light assembly

• Disconnect power to the appliance before starting any repair to avoid shock
• Handle lens and socket carefully; avoid forcing clips or screws to prevent breakage
• Replace the bulb with the manufacturer-recommended type and wattage; do not exceed specified limits

This grille clip is a small plastic retainer that secures a refrigerator grille or trim piece to the cabinet, keeping the front panels aligned and preventing rattles or gaps for a tidy appearance. What it does:

• Secures the lower/front grille or trim to the appliance cabinet to hold it in place
• Prevents grille movement, rattling, or sagging that can occur with worn clips
• Helps maintain a tight fit between trim and cabinet for a finished look
• Simple replacement part when existing clip is cracked, broken, or missing

• One grille clip

• Typically snaps into place; inspect mating slot and clip orientation before installing
• Replace any damaged adjacent clips for even support and fit
• Work carefully to avoid damaging the grille or surrounding trim

This replacement refrigeration tube routes water between the dispenser/valve and internal components to restore reliable water flow and drainage. It's a simple, low-cost part that helps stop leaks and restore proper water delivery. What it does

• Channels water from the inlet valve to internal lines or dispenser components
• Replaces cracked, kinked, or clogged tubing that can cause leaks or reduced flow
• Helps stop visible drips under or inside the refrigerator when the original tube fails
• Works as a direct-fit service part when the OEM tube is damaged

• One replacement tube as shown

• Disconnect power and shut off the water supply before beginning any work
• Inspect fittings and clamps; replace any damaged fasteners to prevent leaks
• Route the tube following original path; avoid sharp bends and pinch points

This molded evaporator cover replaces the plastic trim that protects and directs airflow over the freezer evaporator; it helps maintain even cooling and keeps ice and debris away from the coil assembly. Fits the OEM mounting locations for a proper seal. What it does

• Protects the evaporator coil from loose food and debris that can impede airflow.
• Directs cold air through the freezer compartment for more consistent temperatures.
• Helps reduce frost build-up on the evaporator by maintaining proper airflow patterns.
• Restores proper fit and appearance where the original cover is cracked, warped, or missing.

• One evaporator cover

• Disconnect power to the appliance before starting any repair.
• Remove screws or fasteners holding the old cover; handle tabs carefully to avoid breaking mounting clips.
• Defrost and dry the area if there is ice buildup before installing the new cover.
• Reassemble panels and verify there are no gaps that could allow air leaks or contact with moving components.

This is a replacement appliance switch used to complete or interrupt a circuit for lights, controls, or safety features. It restores proper on/off function so features respond when the switch is pressed or released. What it does:

• Acts as a user-operated electrical contact to turn a circuit on or off
• Commonly used for door lights, control panels, or interlock functions
• Works as a direct mechanical/electrical replacement when the original switch fails

• One replacement switch

• Disconnect power to the appliance before attempting replacement
• Verify orientation and connector fit; do not force terminals
• Dispose of the old switch per local electronic-waste guidelines

This shelf channel mounting bracket secures the shelf channel to the appliance cabinet so shelves stay level and stable. It replaces a broken or worn mount to restore proper shelf alignment and support. What it does

• Secures the shelf channel to the cabinet frame so shelves sit flush and don't tilt.
• Prevents shelf movement or sagging caused by a loose or cracked mount.
• Helps maintain safe storage by keeping items from sliding off tilted shelves.
• Fits where the original channel mount has cracked, worn, or snapped.

• Designed for simple replacement—remove the shelf and channel to access the mounting bracket.
• Use appropriate hand tools; avoid over-tightening fasteners which can crack plastic components.
• Disconnect power and remove stored items from the shelf area before beginning work.
• If mounting locations are damaged, assess surrounding supports; replace any additional broken hardware.

This replacement freezer basket provides an easy way to organize and access frozen foods inside the freezer compartment. It restores usable storage space and keeps items contained for neater, more efficient freezing. What it does:

• Holds and organizes frozen food items to prevent shifting and stacking
• Slides or lifts into the freezer compartment for easy access to contents
• Helps improve visibility so you can find items faster
• Works as a direct-fit replacement for the matching factory basket when the old one is cracked or damaged

• One freezer basket

• Remove food and shelves as needed for clear access before installing
• Slide or set the basket into the freezer compartment until it seats securely
• Do not force into place; check orientation and positioning of rails or ledges
• For safety, unplug the appliance or disconnect power before working inside the freezer

The Dispenser Drip Tray is an OEM part for Frigidaire refrigerators. It is located under the water and ice dispenser to catch any drips or spills that occur during use.

A bad dispenser drip tray can be caused by wear and tear, damage, or improper cleaning. When the drip tray becomes faulty, it can result in issues such as water or liquid pooling on the dispenser area or leaking onto the floor.

Symptoms of a bad dispenser drip tray include:

• Water or liquid pooling on the dispenser area
• Leaks or drips from the dispenser onto the floor
• Difficulty in removing or cleaning the tray due to damage

Replace your faulty dispenser drip tray with this genuine OEM Frigidaire part to restore your dispenser area. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This light assembly replaces the refrigerator interior lamp housing to restore interior illumination and safe bulb mounting. It provides a secure lens and socket assembly so the interior light functions correctly and stays protected. What it does:

• Houses and secures the interior lamp socket and lens for the refrigerator compartment
• Protects the bulb from contact with stored items and helps diffuse light for better visibility
• Restores proper lamp alignment and electrical connection when the old housing is cracked or broken
• Helps prevent loose bulbs and reduces risk of accidental bulb damage

• Disconnect power to the appliance before servicing to avoid electrical shock
• Use appropriate screwdriver or trim tool to remove the old housing; handle the lens carefully to avoid scratching or breaking
• Wear gloves and eye protection when handling bulbs or broken parts

This mullion assembly is the vertical door trim that covers the gap between refrigerator doors and provides a finished appearance while helping maintain a tighter seal. Replacing a cracked or warped mullion restores the look and reduces drafts. What it does

• Covers the vertical gap between doors and provides a finished trim piece.
• Helps maintain an improved door seal and reduces cold-air leakage around the door edge.
• Prevents visible damage or gaps that can allow moisture, frost, or odors into the cabinet.
• Restores proper door alignment appearance when the original mullion is dented, cracked, or warped.

• One mullion assembly.

• Disconnect power to the appliance before removing door panels or working near electrical components.
• Remove any door bins/trim as needed, then unfasten mounting screws or clips holding the mullion and lift out; reverse to install.
• Use care to avoid scratching door surfaces; gently align and seat clips/screws so the trim sits flush.

This replacement cover protects the refrigerator control panel and internal components while restoring a finished look. It keeps switches and wiring shielded from spills, dust and accidental contact for safe, reliable operation. What it does

• Covers and protects control panel area and related components
• Helps prevent moisture, food debris and accidental contact with switches or wiring
• Restores finished appearance when original cover is cracked, broken or missing
• Compatible with factory mounting points for a secure fit

• One replacement cover

• Disconnect power to the appliance before replacing any parts
• Remove any retaining screws or clips and gently lift old cover away from mounting points
• Align new cover with mounting tabs and secure with the original fasteners
• Inspect adjacent components for damage and replace as needed

This replacement tube routes water inside the refrigerator to the ice maker or dispenser, restoring reliable water flow and helping prevent leaks. It's a direct-fit plumbing tube used where the factory line is damaged or worn. What it does

• Carries water from the internal water line to the ice maker or dispenser
• Helps stop leaks caused by cracked, kinked, or corroded tubing
• Restores normal filling when the ice maker or dispenser is not getting water
• Works as the OEM replacement part specified for the fridge's internal water routing

• Disconnect power and shut off the household water supply before starting.
• Inspect and clean connection fittings; replace clamps or seals if damaged.
• Use proper tubing cutters and avoid sharp bends or kinks when routing the tube.

This replacement screw secures select refrigerator door handles to the door. A worn or missing screw can leave the handle loose or detached, making the door difficult to open and potentially stressing other components.

• Holds the door handle firmly to the door
• Helps restore proper door operation and safe grip
• Designed to fit designated mounting points for compatible models

• Unplug the refrigerator before beginning work
• Open the door to access the handle mounting points
• Use the correct screwdriver/Allen tool to avoid stripping the head
• Start threads by hand and tighten snugly—do not overtighten

A single replacement mounting screw used to secure trim, panels, or components on compatible Frigidaire appliances. Restores a lost or stripped fastener so panels and parts sit firmly and safely. What it does

• Secures trim pieces, control panels, brackets, or small appliance components
• Replaces missing or damaged screws that cause loose or rattling parts
• Helps restore proper alignment so doors and panels close and seal correctly
• Useful when reassembling after maintenance or part replacement

• Inspect matching hole and threads; replace with like-size screw to avoid damage
• Use correct screwdriver or driver bit to prevent stripping the head
• Do not overtighten; snug until secure
• Disconnect power to the appliance before accessing internal panels or components

This condenser tube spacer positions and secures the refrigerator's condenser tubing to maintain proper tube spacing and airflow. Replacing a worn or broken spacer helps reduce vibration, rattling, and rubbing that can damage tubing over time. What it does:

• Holds condenser tubing in the correct position to preserve airflow and cooling efficiency
• Cushions tubing to limit vibration and reduce rattling noises
• Prevents tubing from rubbing against the cabinet or other components, lowering wear risk
• Helps reduce the chance of tubing fatigue that can lead to damage

• Disconnect power to the appliance before accessing rear panels or condenser components.
• Handle condenser tubing gently; avoid kinking, bending, or putting stress on lines during installation.
• Installation may require removing the back or lower access panel to reach the condenser assembly.