Frfs282laf1 Parts

This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:

• Secures panels, trim, or internal components to maintain proper alignment and stability.
• Stops rattling or vibration caused by loose or missing hardware.
• Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
• Small hardware solution for common fit and finish issues.

• Disconnect power and any water supply before starting work.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Keep track of small parts and work on a stable surface; magnetic trays help.

The Right Door Closer is an OEM part for Frigidaire refrigerators. It is responsible for ensuring that the refrigerator door closes securely and maintains a proper seal, keeping the cold air inside and your food fresh.

A bad right door closer can be caused by wear and tear, damage, or misalignment. When the closer becomes faulty, it can result in issues such as a loose or sagging door, difficulty in closing the door properly, or a compromised seal that leads to temperature fluctuations.

Symptoms of a bad right door closer include:

• Door not closing or sealing properly
• Condensation or frost buildup inside the refrigerator
• Noisy or squeaking door operation

Replace your faulty right door closer with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Hex washer head ,10-32 x 0.375. Ground

This solenoid is the electromagnetic actuator that moves or opens a valve or lever in compatible Frigidaire appliances, restoring correct mechanical action so the affected function operates reliably again. What it does:

• Converts electrical signals into mechanical movement to open/close a valve or actuate a latch
• Commonly controls water or ice fill, dispenser valves, or mechanical releases
• Replacing a failed solenoid can stop symptoms like no water/ice dispensing, valves not opening, or unresponsive mechanical actuators
• Designed to fit and perform like the original part when installed according to manufacturer instructions

• One solenoid

• Disconnect power (and water, if applicable) before starting any repair
• Inspect wiring and connectors for damage; test continuity with a meter

Replacement screw used to secure trim, brackets and panels on compatible Frigidaire appliances. Restores proper fit to reduce rattling and keep components from coming loose for safer, more reliable operation. What it does

• Secures panels, trim pieces and small brackets so parts stay aligned and flush.
• Stops rattling or vibration caused by missing or loose fasteners.
• Prevents components from shifting or falling out during normal use.
• Works wherever the OEM screw specified by the appliance diagram is required.

• Disconnect power (and water, if applicable) before starting any repair.
• Use the correct driver and size to avoid stripping the head or threads.
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic.
• If the new screw does not seat properly, confirm this is the correct OEM part before forcing it.

This is a replacement screw fastener used to secure panels, trim, or components on compatible Frigidaire appliances. It restores proper fit and prevents rattling or loose parts for safe, reliable operation. What it does:

• Secures panels, brackets, or trim pieces to keep components aligned and stable
• Prevents rattling, vibration noise, and gaps caused by missing or loose fasteners
• Restores proper assembly after service or part replacement
• Helps maintain safety by keeping covers and guards firmly attached

• One screw (single fastener)

• Disconnect power or unplug the appliance before servicing
• Use the appropriate driver to avoid stripping the head; do not overtighten
• Verify the screw matches the original in length and thread before installing

This replacement coil-cover gasket seals the refrigerator coil/cover area to help maintain proper airflow and reduce dust buildup around the condenser/evaporator cover. Restores the intended fit and helps maintain cooling efficiency. What it does:

• Seals the gap between the coil cover and cabinet to direct airflow over coils
• Helps prevent dust, debris and pet hair from collecting on coils
• Reduces vibration noise by cushioning the cover edge
• Commonly replaced when the gasket is torn, flattened, or missing, or when air leaks are noticed

• Inspect mating surfaces and remove old adhesive/residue before installing for a secure seal
• Use appropriate adhesive or clips if required by your model; follow OEM instructions
• Disconnect power to the appliance before servicing and avoid sharp edges on sheet metal

This is a replacement outer housing cover that restores the appliance's exterior protection and appearance. It shields internal components from debris and helps maintain a finished look for the unit. What it does:

• Covers and protects internal components from dust, dirt and incidental contact
• Restores a clean, finished exterior where the original cover was cracked, warped or missing
• Helps prevent small objects from falling into internal openings
• Reduces visible wear on the appliance for a neater installation

• Disconnect power to the appliance before starting any work
• Remove any retaining screws or clips holding the old cover in place; lift or slide out gently
• Align the replacement cover carefully and re-secure with original hardware

This light assembly restores interior illumination so you can see food and controls clearly. It replaces a broken, cracked, or non-working refrigerator interior light housing for reliable, even lighting inside the compartment. What it does:

• Provides interior illumination for refrigerator compartments.
• Replaces cracked or yellowed lens, damaged housing, or failed light socket.
• Fixes intermittent or non-working interior lights caused by a faulty assembly.
• Helps bulbs seat correctly and stay connected to the refrigerator wiring.

• Disconnect power to the refrigerator (unplug or shut off circuit) before installation.
• Handle the lens carefully to avoid scratching or cracking; bulbs may need replacing separately.
• Verify connector orientation and secure wiring harness to prevent loose connections.

This light assembly is the interior lamp housing that provides illumination inside the refrigerator, improving visibility for food storage and retrieval. It replaces damaged or non-functioning interior lighting components. What it does:

• Houses the refrigerator interior bulb and lens to direct light inside the compartment
• Restores interior illumination when the light is out, dim, or the housing is cracked
• Protects the bulb from spills and contact while ensuring even light distribution
• Works with the door switch to turn the light on and off as the door opens and closes

• Disconnect power to the appliance before inspecting or replacing the part
• Remove shelves or clips as needed to access the light assembly; handle lens and bulb carefully
• If bulb is separate, ensure correct replacement bulb is used and seated properly

This replacement drawer panel restores the front face of an inner refrigerator drawer so it looks and functions like new. It provides the finished surface users see and helps keep stored items contained. What it does:

• Replaces a cracked, faded, or damaged inner drawer front to improve appearance
• Restores a secure front edge so the drawer opens and closes properly
• Prevents gaps that can let items shift or become trapped under the drawer
• Matches the OEM fit and mounting points for a direct swap

• Unplug the appliance or disconnect power before working on the refrigerator.
• Remove the drawer per your model's service instructions to access mounting clips or screws.
• Handle the panel carefully to avoid scratching; align mounting tabs before pressing or fastening.
• If you encounter broken clips or fasteners, replace them with the correct parts rather than forcing the panel.

This replacement refrigerator door handle restores a secure grip for opening and closing the fridge door. It replaces a cracked, broken, or worn handle to improve usability and appearance. What it does

• Provides a solid grip to open and close the refrigerator door
• Replaces handles that are cracked, split, loose, or missing
• Helps the door latch and seal operate normally by supplying correct leverage
• Conserves the cabinet finish by covering damaged mounting areas

• One replacement door handle

• High-level, do-it-yourself friendly; handle attaches with hidden screws or clips behind trim—confirm fasteners before starting
• Disconnect power only if your model requires removing electrical trim or lights near the handle area
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the replacement

Color: Black/natural. Nylon