Frigidaire Fafs4272lw-Ww Parts

This main electronic control board manages refrigerator functions and restores user control to the appliance. Replaces a failed board to return digital controls, cycles, and timed components to normal operation. What it does:

• Receives and processes user inputs from the control panel and directs functions like cooling cycles and defrost.
• Controls compressor, fans, and defrost timing so the refrigerator maintains proper temperature regulation.
• Powers and updates the display and user interface; often replaced when the display or buttons become unresponsive.
• Common symptom fix: intermittent or complete loss of control panel response, erratic cooling behavior, or failure to initiate defrost cycles.

• One main electronic control board

• Disconnect power to the appliance before beginning any repair to avoid electric shock.
• Handle the board by the edges and avoid static discharge; wear an anti-static wrist strap if available.
• Verify connector orientation and seating before restoring power; do not force connectors.

A simple wire-fastening cable tie that secures wiring and small hoses to prevent rubbing, snagging, or loose routing inside the appliance. Helps keep components organized for safer, quieter operation. What it does

• Secures wiring bundles and small hoses to chassis or brackets to prevent abrasion and movement
• Helps stop intermittent shorts or electrical noise caused by wires rubbing or contacting other parts
• Keeps airflow and moving parts clear by holding wiring away from fans and belts
• Useful when replacing or re-routing harnesses during repairs

• Always disconnect power before working on the appliance.
• Loop tie around wiring or hose, pull to secure snugly, and trim excess tail; do not overtighten.
• Replace ties that are brittle or damaged; use the same routing as the original harness.
• Dispose of trimmed ends and avoid sharp edges that could cut wiring insulation.

Keep your washer protected during a move. This shipping bolt secures the washer's tub and suspension during transport. Replace missing bolts before relocating the appliance to help prevent vibration damage, leaks, and broken suspension components.

• Locks the tub assembly to minimize movement while the washer is shipped or relocated
• Helps prevent damage to shocks/suspension, outer tub, and hose connections during a move
• Use for transport only; remove all shipping/transit bolts before operating the washer
• If a move was done without shipping bolts, post-move symptoms may include excessive vibration, banging, or leaks

• Unplug the washer, shut off water, and drain/empty the unit before installing shipping hardware
• Refer to your model's installation guide for the required number and locations; install all shipping bolts specified for your model
• Tighten each bolt until snug; do not overtighten
• Remove all shipping bolts after relocation and keep them for future moves; never run the washer with shipping bolts installed

This is a #8 screw, 0.500 inch long, used to secure panels and components in appliances. It provides a correct-fit fastener for repairs where the original #8 x 1/2" screw was required, restoring proper assembly and stability. What it does:

• Fastens trim, panels, brackets and small components where a #8 x 1/2" screw is specified
• Holds parts securely to prevent rattling, gaps or loose panels
• Replaces worn, stripped or missing screws to restore proper fit
• Appropriate for common interior and exterior appliance mounting points

• Use the correct screwdriver (typically Phillips) and avoid over-tightening to prevent strip or damage
• Disconnect power and follow appliance manufacturer safety instructions when accessing internal parts

This is a replacement bolt fastener that secures interior and exterior appliance components for stable operation and safe use. It restores proper fit where a worn or missing bolt causes looseness or rattling. What it does:

• Secures panels, brackets, or assemblies to prevent shifting and vibration
• Restores proper alignment for doors, drawers, or mounted components
• Helps stop rattling, squeaks, or visible gaps caused by a missing or damaged fastener
• Provides a durable connection when the original bolt is stripped, corroded, or lost

• One replacement bolt

• Use the correct size socket or wrench to avoid rounding the head
• Hand-start threads to prevent cross-threading; tighten until snug—do not overtighten
• Disconnect power and empty affected areas if working near electrical components or sharp edges
• Replace with the exact OEM bolt for best fit and function

This clamp secures flexible hoses and small-diameter tubing to fittings, helping prevent leaks and keeping connections tight for reliable appliance operation. Use it where a compact, durable clamp is required for water or drain lines. What it does:

• Holds hoses or tubes firmly to inlet/outlet fittings to reduce leaks
• Prevents hoses from slipping off during normal use or vibration
• Helps maintain proper fluid flow by keeping connections sealed
• Useful for water lines, drain hoses, and small appliance tubing

• One clamp

• Turn off and unplug the appliance and shut off water supply before starting
• Inspect the hose and fitting; replace any damaged hose before installing clamp
• Position clamp over the hose/fitting and tighten evenly for a snug fit without crushing the hose

A replacement mounting nut that secures components and fasteners on compatible Frigidaire appliances. Restores proper fastening to stop loose panels, trim, or hardware from shifting and reduces vibration or rattling during operation. What it does

• Secures threaded bolts, studs, or components to hold panels, brackets, or assemblies in place
• Stops loose or wobbling trim, handles, or panels that cause noise or misalignment
• Replaces a stripped, corroded, or missing nut that prevents proper fastening
• Works wherever the original OEM nut is used to retain appliance parts

• One replacement mounting nut

• Turn power off or unplug the appliance before accessing fasteners
• Use the correct sized wrench or socket to avoid rounding the nut
• Tighten securely but avoid overtightening to prevent thread damage
• Replace any stripped studs or mating hardware for a reliable repair

This replacement access cover restores the appliance's exterior protection and helps keep internal components shielded from dust and moisture. It provides a clean finished appearance and maintains safe operation when installed correctly. What it does:

• Replaces a damaged or missing access cover to protect internal parts from debris and accidental contact
• Helps prevent moisture and dust from reaching electrical and mechanical components
• Restores the appliance's finished look and secures components behind the cover
• Can resolve issues where a broken cover prevents safe use or proper panel alignment

• One replacement access cover

• Disconnect power (unplug appliance or switch off circuit breaker) before beginning any work
• Follow OEM disassembly steps for the specific model; keep fasteners and trim for reuse unless damaged
• Use appropriate tools and avoid forcing clips or tabs to prevent cracking the new cover