Gcrg3060adb Parts

This evaporator fan cover protects the refrigerator evaporator fan assembly and helps direct airflow for proper cooling. It's a molded replacement part that restores the original airflow path and prevents debris contact with the fan. What it does:

• Shields the evaporator fan and motor from ice buildup and loose debris
• Directs airflow across the evaporator for even cooling in the freezer compartment
• Helps reduce fan noise by stabilizing airflow around the fan housing
• Commonly replaced when cracked, broken mounting tabs are present, or airflow is obstructed

• One fan cover

• Disconnect power before accessing the evaporator compartment to avoid shock and fan injury
• Remove food and evaporator access panels per model service instructions before replacing the cover
• Handle clips and mounting tabs gently—use proper fasteners if any original hardware is damaged
• If you encounter ice buildup on the evaporator, fully defrost and address the underlying cause before reassembly

This valve mounting screw secures refrigerator water/ice valve assemblies and their mounting brackets, helping keep the valve stable and properly aligned. A simple replacement to address loose or vibrating valve hardware. What it does:

• Secures the valve mounting bracket to the appliance cabinet or valve body
• Fits standard 1/4-20 threaded valve mounting points
• Restores secure mounting when original screw is loose, missing, or stripped
• Helps reduce vibration-related noise and the risk of valve movement that can lead to leaks

• Disconnect power and shut off the water supply before servicing
• Start the screw by hand to avoid cross-threading, then tighten until snug
• Do not over-tighten; replace if threads are stripped or damaged

This cabinet insulation helps reduce heat transfer inside the refrigerator, supporting stable temperatures and efficient cooling. Replacing damaged or missing insulation can improve temperature control and reduce frost buildup. What it does:

• Fills gaps between the cabinet and liner to slow heat transfer and maintain internal cold
• Helps the appliance reach and hold set temperatures more consistently
• Reduces condensation and excess frost on interior surfaces
• Can improve compressor run-time and overall energy efficiency when intact

• Disconnect power before starting
• Remove food and shelving from the compartment before accessing the insulation
• Handle insulation carefully to avoid tearing; secure per manufacturer routing and adhesive points
• Dispose of old insulation per local regulations

This surface burner replaces a worn or damaged cooktop heating element so your range can heat cookware reliably. It restores normal cooking performance for electric ranges with a removable cooktop element design. What it does:

• Heats cookware on the cooktop to cook or boil food
• Replaces elements that fail to heat, heat weakly, or heat unevenly
• Stops arcing or sparking when the element is cracked or damaged
• Works with the range's burner receptacle and control switch to regulate temperature

• Disconnect power to the range at the breaker before servicing
• Allow the cooktop and element to fully cool before attempting removal
• Element typically plugs into a burner receptacle and lifts out; secure fit and correct orientation are required
• If wires or the receptacle are damaged, replace damaged components

This replacement glide restores smooth, supported movement for a refrigerator or freezer drawer. It prevents catching and uneven travel so drawers open and close reliably and stay properly aligned. What it does

• Replaces a worn or broken drawer glide to restore smooth sliding motion
• Supports the drawer to prevent sagging or misalignment during use
• Reduces rubbing, scraping, and noisy operation when opening or closing the drawer
• Helps prevent the drawer from sticking or coming off its track

• One glide

• High-level swap: remove the drawer to access the glide, unfasten the old piece, then secure the new glide in the same position
• Use appropriate hand tools; avoid forcing parts to prevent cabinet or track damage
• Wear gloves to protect hands and disconnect power if working near electrical components
• Replace fasteners before reinstalling the drawer

A replacement cooktop surface burner that restores even heat for stovetop cooking. Simple swap restores a damaged or worn burner head so pots and pans heat properly. What it does

• Replaces a worn, cracked, or corroded cooktop burner head to restore safe, even heating
• Helps eliminate weak or uneven flames and heat spots during cooking
• Works with the burner cap and grate to provide a stable cooking surface
• Matches OEM shape and mounting for a straightforward replacement

• Turn off the gas supply (for gas cooktops) or disconnect power before servicing
• Remove grate and burner cap, swap the faulty burner for the replacement, then reassemble
• Inspect burner ports and ignition area; clean debris before reinstallation

This small protective cap covers and protects exposed appliance hardware, keeping dirt and moisture out while preventing accidental contact. It's a simple replacement that restores a finished appearance and helps maintain part integrity. What it does:

• Covers and protects an exposed shaft, tab, or fastener from debris and wear
• Helps prevent accidental contact with sharp or moving parts
• Restores the finished look of the appliance where the original cap was lost or damaged
• Simple, passive part—no electrical or mechanical function to reconfigure

• One replacement protective cap

• Always unplug the appliance or disconnect power before servicing
• Remove the damaged cap by hand or with a gentle pry tool; press the replacement into place until fully seated
• Small part—keep away from children and pets; loss is common during disassembly

This electronic control circuit board manages a range of appliance functions, translating user inputs and sensor signals into controlled operation. Replacing a failed board restores correct control, display responses, and electronic features. What it does:

• Receives input from buttons/knobs and sends commands to motors, valves, or heating elements
• Interprets sensor signals to maintain normal cycles and safety interlocks
• Drives the user interface and display; a faulty board can cause blank or erratic displays
• Stops or prevents operation when control electronics fail, causing no-start or stalled cycles

• One circuit board assembly

• Disconnect power (unplug or shut off breaker) before starting any repair
• Take photos of wiring and connector locations before disconnecting to ensure correct reassembly
• Handle the board by its edges and avoid static discharge; use anti-static precautions if available
• If mounting hardware or connectors are damaged, replace them rather than forcing a fit.

This bake element is the oven's lower heating element that provides steady, even heat for baking and roasting. Replacing a worn or damaged element restores proper oven heating and consistent cooking results. What it does

• Heats the oven cavity during bake cycles to maintain set temperatures.
• Replaces a broken or burnt-out lower element causing no heat.
• Helps correct uneven baking or undercooked dishes when the element is failing.
• Works with the oven's control and thermostat to regulate bake temperature.

• One bake (lower) oven heating element — exact fit as shown.

• Disconnect power to the appliance before attempting any service; this part operates on live voltage.
• Access typically requires removing the oven racks and the back panel or cavity access screws.
• Inspect terminal connections and insulation; replace any damaged wiring or hardware.

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

A motor bracket that secures the motor assembly to the appliance chassis to keep the motor aligned and stable. Replaces a worn or damaged bracket to reduce movement and help restore normal operation. What it does:

• Provides a stable mounting point for the motor to prevent excessive movement
• Keeps the motor correctly aligned with related components
• Helps reduce noise, vibration, and rubbing caused by a loose or broken bracket
• Prevents further wear on motor mounts and connected parts by holding the motor securely

• One motor bracket

• Disconnect power before beginning any repair to avoid electrical shock
• Support the motor assembly while removing and installing the bracket to prevent strain on wiring or components
• Retain and reuse any original mounting hardware only if undamaged; replace stripped or corroded fasteners

This glide is a replacement drawer slide that helps the refrigerator or freezer drawer open and close smoothly and stay aligned. It restores stable drawer movement and reduces sticking or uneven travel. What it does:

• Guides the drawer along its track for smooth, controlled opening and closing
• Keeps the drawer aligned to prevent rubbing, binding, or uneven movement
• Replaces worn or damaged glides that cause sticking, sagging, or noisy operation
• Works as a structural support point for the sliding drawer assembly

• One replacement glide

• Basic hand tools are typically all that's needed; remove the drawer to access the glide
• Compare the old glide to this part before installing to confirm fit and orientation
• Keep fingers clear of pinch points; wear gloves if needed and follow appliance power-off safety
• If fasteners are stripped or broken, replace them with OEM-equivalent hardware