Gdf51opsross Parts

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This 4-button control panel membrane switch replaces a worn or unresponsive front-panel button assembly to restore control input on the appliance. It provides direct tactile buttons for common cycle and function selections. What it does:

• Replaces the appliance's 4-button user interface so button presses register correctly
• Restores reliable touch/press input when existing buttons are sticky, cracked, or non-responsive
• Works as the primary input surface for start, stop, cycle select, or similar basic commands
• Helps avoid miscommands caused by damaged or worn button contacts

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Installation typically requires removing the console or control bezel to access the switch assembly
• Handle the membrane carefully; avoid folding or creasing the flex contact area

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

A replacement plastic wire tie used to secure wiring harnesses and small tubing inside appliances, keeping wires organized and away from moving parts or hot surfaces for safer operation and reduced noise. What it does:

• Holds wiring and small hoses in place to prevent rubbing, chafing, or contact with moving components
• Helps stop wire harnesses from vibrating or rattling during operation
• Reduces risk of electrical shorts caused by loose or misplaced wires
• Keeps wiring routed neatly for easier servicing and inspection

• Disconnect power to the appliance before servicing
• Position wires, loop the tie around them, tighten to secure, and trim excess tail
• Do not overtighten; avoid cutting into insulation
• Keep wire routing clear of sharp edges, high-heat areas, and moving parts

This light shield is a molded plastic diffuser that protects and disperses the interior appliance light for clearer, gentler illumination. It replaces damaged or missing shields to keep the bulb covered and light evenly distributed. What it does:

• Covers and protects the interior light bulb from contact with food, spills, and debris
• Diffuses and softens the bulb output for more even interior lighting
• Helps prevent direct glare from the bulb and reduces hot spots
• Common symptom: cracked, melted, missing, or rattling shield that exposes the bulb

• One light shield

• Disconnect power to the appliance before attempting replacement
• Remove bulb carefully to access and seat the shield; avoid excessive force
• Use only the exact replacement part designed for your model to ensure proper fit
• If the existing mounting clips or brackets are damaged, replace them before reinstalling the shield

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.