Gdf51opsross Parts

This is a stainless steel hex washer-head screw used to fasten and secure components. Its integrated washer head provides a broad bearing surface for a tight, durable hold in appliance assemblies.

• Secures panels, brackets, and hardware to prevent looseness and vibration
• Restores proper fastening when originals are stripped, missing, or corroded
• Stainless construction helps resist rust in moisture-prone areas
• Common symptoms of a needed replacement include rattling, loose panels, or missing hardware

• Disconnect power and, if applicable, shut off water before servicing
• Use the correct nut driver or socket for the hex head to avoid stripping
• Replace any damaged or missing fasteners in matched pairs or sets for even clamping
• Do not overtighten; snug to manufacturer torque guidance when available

This door spring provides hinge tension for a dryer door, helping it stay closed and operate smoothly. It replaces a worn or broken spring to restore proper door alignment and reliable closing action. What it does:

• Applies consistent tension to the dryer door hinge so the door closes securely.
• Helps prevent the door from sagging or hanging open due to a weakened spring.
• Reduces door misalignment that can interfere with dryer operation or sealing.
• Commonly replaced when the door feels loose, won't stay closed, or sags.

• Disconnect power to the appliance before beginning any work.
• Use care when removing/installing spring components—springs are under tension and can snap.
• Keep track of any clips, screws, or hinge parts removed and reinstall in the original order.

This foam vent insert seals and cushions the dryer vent opening to reduce airflow leaks, vibration noise, and lint bypass. It helps maintain proper venting and stops drafts for more efficient drying and quieter operation. What it does:

• Forms a compressible seal around the dryer vent outlet to limit air and lint escape
• Cushions the vent connection to reduce rattling and vibration noise
• Helps prevent drafts from entering the cabinet when the dryer is off
• Supports consistent airflow path for better drying performance

• Designed for snap-in or press-fit installation at the vent opening; your model diagram for location
• Turn off and unplug the appliance before accessing the vent area
• Inspect surrounding vent and ductwork for damage or excessive lint; replace if needed

This manual floor plate is the replacement cover that mounts at the appliance base to protect internal components and provide a finished surface. It restores the dryer's base appearance and helps prevent debris from entering the cabinet. What it does:

• Covers and protects the lower cabinet opening and components from dust and lint
• Helps maintain proper clearance and a finished look at the dryer base
• Replaces damaged, bent, or missing base plates that allow debris entry
• Can reduce rattles or vibration caused by a loose or warped floor plate

• One floor plate

• Disconnect power (and gas, if applicable) before servicing to avoid shock or injury
• Remove the dryer front or lower access panel per manufacturer instructions to access mounting screws
• Use correct-size screws and tighten to manufacturer torque; avoid over-bending the plate during installation

Left side roller cover.

This floor plate is the OEM-style replacement that fits under the oven cavity to protect internal components and provide a stable cooking surface. Restores proper support and helps maintain even heat distribution in the lower oven area. What it does

• Covers and protects the oven's lower cavity from spills, drips, and falling debris
• Helps funnel heat and airflow for more consistent baking and roasting performance
• Prevents direct contact between food/drips and heating components
• Reduces corrosion and wear to inner oven parts caused by spills

• One floor plate as shown

• Designed to be installed in the lower oven cavity; for exact placement
• Remove power (unplug or shut off breaker) and allow the oven to cool before servicing
• Use appropriate gloves to avoid sharp edges; avoid forcing the part into place

The Screw is an OEM part for GE dishwashers. This screw is designed for various applications, including securing and fastening components in your GE appliance.

A bad screw can result in issues such as loose or unstable components, improper functioning, or even potential damage to other parts. Causes of a bad screw can include wear and tear over time, improper installation, or exposure to extreme conditions.

Symptoms of a bad Screw include:

• Components becoming loose or detached
• Parts not securely fastened
• Unusual noises or vibrations during operation
• Visible signs of damage or wear on the screw

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This latch cam engages the door latch mechanism so the appliance door closes and stays secure during cycles. A worn or broken cam can prevent the door from latching or cause the door to feel loose. What it does

• Rotates with the latch to lock the door securely during operation
• Ensures the latch striker catches and holds the door closed
• Common symptom: door won't stay latched or appliance won't start
• Common symptom: door feels loose, noisy, or intermittently opens during cycles

• One latch cam

• Disconnect power before starting any repair to avoid shock or injury
• Inspect surrounding latch components and replace any visibly damaged parts
• Use basic hand tools; keep track of small fasteners and alignment during reassembly
• Test door operation several times after installation to ensure secure engagement

This silicon controlled rectifier (SCR) switches and regulates power to heating or motor circuits, helping the appliance control temperature and run cycles reliably. It's a direct-fit electronic switching component used in a variety of control systems. What it does:

• Acts as an electronic switch to regulate AC power to heating elements or motors
• Helps control temperature output and maintain consistent cycle performance
• Can prevent unwanted continuous current flow when functioning properly
• Commonly replaced when ovens, ranges, or dryers fail to heat or cycle correctly

• One silicon controlled rectifier (SCR) as shown

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the SCR by its body; avoid touching terminals and static-sensitive areas
• Verify proper orientation and secure mounting; follow OEM wiring and torque practices

This user interface board controls the appliance's front-panel buttons and service-configured functions, restoring reliable button response and menu control. Designed to replace a failed 4-button interface for models that use this configured service board. What it does:

• Registers button presses and sends commands to the main control board
• Restores responsive front-panel controls when buttons are unresponsive or intermittent
• Helps resolve control-related errors, unresponsive displays, or menu/navigation failures
• Works with service-configured settings tied to the appliance's control system

• One user interface board (4-button, configured service)

• Disconnect power before servicing to avoid shock or damage
• Handle the board carefully; avoid electrostatic discharge (use a grounded strap if available)

This inner door assembly replaces a damaged or worn inner panel to restore a secure, insulated door interface and proper sealing. It fits into the existing door frame to help resolve door rattling, poor closure, or visible inner-door damage. What it does:

• Replaces the appliance's inner door panel to restore structural integrity and improve sealing.
• Helps stop door rattling, unusual vibration, or gaps caused by a cracked or bent inner door.
• Restores the inner surface that supports door hardware and seals.
• Enables proper alignment for the outer door and latch operation when the inner panel is the cause of failure.

• One inner door assembly

• Disconnect power to the appliance before starting any repair.
• Handle door components carefully—sharp edges or glass may be present.
• Basic tools (screwdriver, socket) typically required; follow service manual for disassembly/reassembly steps.

Replacement control box top that restores the protective cover for the appliance control housing, keeping wiring and electronics enclosed for a cleaner appearance and safer operation. What it does:

• Covers and protects the control housing and internal wiring from dust, spills, and accidental contact
• Helps secure control components in place and maintain the appliance's factory appearance
• Commonly replaced when the original cover is cracked, broken, missing, or shows visible damage
• Can prevent loose wiring from catching or being accidentally disturbed

• One control box top

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Remove any screws or retainers securing the existing cover and lift off the old top; keep fasteners if reinstalling
• Align the replacement top and secure with the original fasteners; ensure wiring is routed and seated before closing

This panel control assembly replaces the washer's user console to restore button and display control, helping return cycle selection and status feedback to normal. Designed as a direct-fit OEM-style control for affected units. What it does

• Receives user inputs (buttons/knobs) and sends cycle commands to the washer's control system.
• Controls and displays cycle status, time remaining, and option selections.
• Resolves symptoms like unresponsive buttons, blank or erratic display, or inability to select cycles.
• Works with the washer's main control to manage start/pause and option functions.

• One panel control assembly (console) as shown.

• Disconnect power before servicing to avoid shock or damage.
• Handle the assembly carefully to avoid damaging ribbon cables and connectors.
• Check connector alignment and secure mounting when installing; test basic functions before full reassembly.
• If display or control issues persist after replacement, check the main control and wiring harness for faults.

The Lower rack roller and stud assembly is an OEM part for GE dishwashers. It supports smooth movement of the lower dish rack in and out of the tub.

Causes of a bad roller and stud assembly can include wear from repeated extension/retraction of the rack. Mineral buildup may also impede smooth operation over time.

Symptoms of a bad roller and stud assembly include:

• Difficulty fully extending or retracting the lower dish rack  
• Noisy squeaking or grinding noises when moving the rack
• Rack that does not glide easily or gets stuck partially out

Replacing the roller and stud assembly with this genuine GE part restores convenient access to dishes on the lower rack. Its quality ball bearings and durable construction enhance usability cycle after cycle.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.