Gdf52opsj Parts

This small plastic clip secures a refrigerator's wiring conduit or harness to the cabinet, keeping wires routed and protected from abrasion. It helps reduce strain on connections and prevents wires from contacting moving parts. What it does:

• Holds wiring conduit or harness in place to maintain neat routing
• Prevents wires from rubbing on sharp edges or moving components
• Reduces strain on electrical connections that can cause intermittent faults
• Helps maintain safe separation between wiring and high-heat or mechanical areas

• Turn power off at the appliance and unplug before inspecting or replacing wiring clips
• Remove access panels only as needed to reach the clip; avoid stressing surrounding wires
• Snap the clip into the original mounting slot or replace any damaged fasteners for a secure fit
• If wires show damage or burns, replace the wiring/harness

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This coarse plastic filter is a replacement strainer that helps keep large debris out of the appliance's water path, protecting internal valves and pumps and helping maintain proper water flow. What it does:

• Catches large particles and sediment before they reach valves, hoses or pumps
• Helps reduce debris-related flow restrictions that can cause poor fill or drain performance
• Reduces the chance of valve damage or clogging from large contaminants
• Commonly replaced when debris is visible or when water flow is noticeably reduced

• One coarse plastic filter/strainer

• Turn off power and water supply before starting any repair
• Access location and removal steps vary by model; follow the parts diagram
• Inspect and clean the housing before installing the new filter; rinse the filter under running water
• Ensure the filter is seated correctly and check for leaks after restoring power and water

The Control Panel Assembly is an OEM part for GE dishwashers. This part provides a user-friendly interface for selecting various wash cycles, options, and settings. It allows you to navigate through the available options and adjust your dishwasher settings to meet your specific needs.

A bad control panel assembly can occur due to wear and tear, electrical malfunctions, or physical damage. If you notice symptoms such as unresponsive buttons, error codes on the display, or the panel not functioning properly, it may be time to replace this part.

Symptoms of a bad control panel assembly include:

• Unresponsive buttons or touchpad
• Error codes on the display
• Panel not functioning properly

Regain control over your GE dishwasher's settings by replacing the faulty control panel assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This Outer Door Service Assembly is an OEM part for GE dishwashers. It forms the external part of the dishwasher door, providing both a protective and aesthetic function. Ensuring that the door closes securely to prevent water leaks and maintain optimal operating conditions.

The need for a replacement outer door service assembly can arise from physical damage, wear over time, or aesthetic degradation. A compromised outer door can lead to operational issues and impact the appearance of the appliance.

Symptoms of a faulty  Outer Door Service Assembly include:

• Difficulty in closing or securing the dishwasher door.
• Visible dents, scratches, or wear that diminish the appearance and functionality.
• Water leakage or poor sealing during operation.
• Misalignment affects the overall operation of the dishwasher.
• Unusual noises or resistance when opening or closing the door.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This control panel assembly replaces the dryer's main user interface so you can restore responsive buttons, cycle selection, and display feedback. It provides the mounted switches and overlay needed for normal panel operation and user control. What it does

• Houses the push buttons, display window, and circuit board that register user inputs and communicate cycle commands
• Restores unresponsive or erratic button behavior, missing display segments, or incorrect cycle selections
• Reestablishes proper electronic signaling between the console and the dryer's control system
• Helps stop intermittent or nonfunctional control responses tied to a damaged or worn panel assembly

• One control panel assembly as shown

• Disconnect power before beginning service to avoid shock hazard
• Handle the PCB and ribbon connectors carefully to prevent static or connector damage
• Some disassembly of the appliance console is required; follow the manufacturer service manual for step-by-step instructions

Note: Left side hinge

This door foam block cushions and seals the appliance door, helping reduce vibration and prevent drafts or leaks where the door meets the cabinet. It replaces worn or damaged foam to restore a tight, even door fit and quieter operation. What it does:

• Replaces the foam block located on the appliance door to restore proper sealing and contact
• Helps reduce noise and vibration caused by door movement or uneven contact
• Minimizes air or water leakage at the door seal when original foam is compressed or degraded
• Simple, passive component—no electrical function

• Install by removing the door trim or access panel per your model's service instructions
• Ensure the mounting surface is clean and dry before placing the foam for best adhesion and fit
• Use basic hand tools; avoid forcing the foam into place to prevent tearing
• Disconnect power and follow manufacturer safety guidance before servicing the appliance

This button tree is the control-panel button assembly that restores tactile button function and reliable input for your appliance's user interface. It provides a direct replacement for worn, sticky, or unresponsive control buttons. What it does

• Replaces the row/cluster of push-button switches used to select cycles, options, or settings.
• Restores button responsiveness and consistent electrical contact when some keys fail or stick.
• Helps resolve intermittent or non-working buttons that prevent normal control operation.
• Works with the existing control board and membrane—does not include electronic control.

• Disconnect power (unplug appliance or shut off breaker) before starting any work.
• Access typically requires removing the control panel or trim; keep fasteners organized.
• Handle the assembly carefully to avoid bending contacts or damaging alignment tabs.

This button tree is the user-interface button assembly for the appliance control panel, restoring tactile buttons and reliable selector input so you can make program selections and start cycles easily. What it does:

• Provides the tactile button contacts used by the control panel to register user presses
• Replaces cracked, missing or unresponsive buttons that prevent selections or starting cycles
• Restores reliable electrical contact between the front buttons and the control board
• Helps eliminate intermittent or no-response behavior from the panel buttons

• Disconnect power before attempting any repair to avoid shock or damage
• Access typically requires removing the control panel or console; keep track of screws and clips
• Handle the button tree and any ribbon or harnesses carefully to avoid tearing contacts