Gdf530pgmoww Parts

The Fine Filter is an OEM part for GE dishwashers. Located at the bottom of the dishwasher tub, the fine filter traps small food particles and debris to prevent clogs in the wash pump and other components. It is a critical filter that helps optimize cleaning performance and protect internal mechanisms.

Symptoms of a bad fine filter include:

• Reduced or inefficient water spraying from the arms  
• Accumulation of debris inside the tub
• Foul odors emitting from the dishwasher
• Drainage or water flow issues 

Over time, particles can accumulate in the fine filter mesh causing it to become clogged. Choosing this genuine GE replacement ensures optimal filtration. It upgrades your dishwasher with a new filter to once again trap particles and keep the wash system running smoothly. This OEM GE part aligns with specifications for Crosley, KitchenAid, and select Kenmore dishwashers as well.
 

The Plastic Coarse Filter is an OEM replacement part for GE dishwashers. It refers to a screen fitted over the wash impeller that traps soil and food debris. Subject to constant exposure to water and detergents, plastic parts can wear down over many cycles. 

Symptoms of a bad coarse filter include:

• Clogged or blocked mesh no longer prevents large particles from entering the wash arm spray jets  
• Cracks along seams or mounting points where water can seep behind
• Brittle or broken crosspieces within the screen compromising structural integrity

Causes of failure relate to the chemical deterioration of plastic combined with physical stresses as debris repeatedly builds up and then dislodges during high-velocity rinse cycles.

This GE replacement part is also compatible with some Hotpoint and RCA models.

The Rack Roller is an OEM component compatible with GE dishwashers. Located on the rack guide rails inside the washer tub, it facilitates smooth gliding of rack shelving in and out for easy loading and unloading. 

Causes of failure can include cracked/warped rollers from years of continual movement, accumulation of debris preventing free motion, or detachment of roller heads compromising installation.

Symptoms include:

• Difficulty fully extending or retracting racks  
• Off-tracking of shelving from left to right rails
• Scratches or damage to dishware from improper rack functioning 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Sump Overmold and Gasket Service Kit is an OEM part for GE dishwashers. Containing both the sump overmold and new gaskets, this kit replaces critical components in the lower dishwasher tub assembly.  

Causes of a bad sump or gaskets can include deterioration of rubber materials over multiple years of use and high heat. Mineral buildup during the wash cycle may also damage sealing surfaces.

Symptoms of a bad Sump Overmold and Gasket Service Kit include:

• Leaks or water entry in the bottom of the dishwasher 
• Excess moisture inside cabinet panels
• Inefficient or incomplete drying performance 

This genuine GE part is compatible with select Hotpoint, RCA and some Kenmore models as well.

The Configured Service Machine Control Board is an OEM part compatible with GE dishwashers. As the central "brain", it manages all wash cycle functions including the wash motor, heating element, rinse arms, and the user interface. 

Symptoms of a bad control board include:

• The dishwasher fails to start cycles or run through completed sequences
• Error codes displayed related to component failures   
• User interface buttons becoming unresponsive or intermittent

Causes can involve moisture damage, physical impact, or normal aging of electronic components over time. Configuration issues may also develop requiring a programmed replacement.

This OEM replacement part is compatible also with Hotpoint, RCA and select Kenmore dishwashers.

The Clamp is an OEM replacement part for GE dishwashers. It holds and secures critical components such as tubing or hoses securely in place. Clamps play an important supporting role by fastening tubing and preventing kinking, both of which are essential for proper water flow and circulation within the dishwasher.

Causes of a bad clamp can include cracks, corrosion, or fatigue that causes the clamp to fail in its gripping function over time. Hoses or tubes may also wear down a clamp through constant vibration. 

Symptoms of a bad clamp include:

• Leaks from hoses, tubes or connections  
• Reduced water pressure or uneven spray patterns
• Moisture or water damage around connections
• Loose hoses that rub or chafe

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Float Mounting Tube O Ring is an OEM component specifically designed for GE dishwashers. This float mounting tube o-ring creates a watertight seal around a tube that helps monitor water levels using a float and switch assembly.  

Causes of a bad float mounting tube o-ring can include cracks, tears or warping that prevents proper sealing. Chemical exposure from regular dishwasher use can cause o-rings to degrade over time.

Symptoms of a bad Float Mounting Tube O Ring include:

• Water leaks in the area around the tube fitting  
• Moisture or water damage near water level monitoring components
• Irregular or improperly timed cycles from inaccurate water level readings
• Safety issues from undetected pooling or overflow of water

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Wire Harness is an OEM part for GE dishwashers. It is a critical wiring assembly that connects major components like the motor, heating element, and control board. Smooth signal transmission through the harness allows for optimized cycle progression.

Symptoms of a bad Wire Harness can include:

• Intermittent operation of certain functions 
• Repeated error codes related to specific components
• Strange odors emitting from the harness area
• Noticeably worn or cracked insulation on wires

Causes are often normal wear over countless vibration cycles, cracking and age-hardening of wires, or damage due to rodents or impact. 

Replace yours today with this genuine OEM GE part to ensure reliable system communication. With its precise design and durable construction, the Wire Harness facilitates fully integrated performance wash after wash. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Friction Washer is an OEM component specifically designed for GE dishwashers. This friction washer is a thin circular part that creates resistance through surfaces rubbing together. It is often used beneath a mounting nut to prevent components from loosening during operation.  

Symptoms of a bad friction washer include loose or separating connections where the washer is installed, such as:

• Drain pump mounting fittings that become detached    
• Water connections that leak at the threaded joints
• Door handle mounts that allow play in the mechanism

Causes of failure can be cracks, wear or deformities in the washer that reduce its friction capabilities over time. Vibrations from use may also cause premature wear.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This dishwasher hose clamp secures internal hoses to pumps or fittings, helping prevent leaks and disconnections. Replace a weakened or damaged clamp to restore a tight, reliable seal at the connection.

• Provides clamping pressure to hold a hose on pump, sump, or drain fittings
• Helps stop water leaking at hose joints
• Resolves: loose or disconnected hoses, water under the unit/base, or poor draining from a slipped drain hose
• Replaces worn, rusted, or deformed clamps after service

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward as needed for access; place a towel or pan to catch residual water
• Seat the hose fully, then compress or tighten the clamp per its design; position just behind the hose barb bead
• Run a short cycle and inspect for leaks at the connection

This sump latch secures the filter/cover at the bottom of the dishwasher tub, locking the sump assembly in place to maintain proper water circulation and filtration while helping keep debris out of the wash pump.

• Locks the sump/filter cover securely to the tub opening
• Helps maintain consistent water flow and wash performance
• Helps prevent large debris from reaching the pump and spray system
• Typical signs it's worn or broken: cracked/missing latch, filter cover won't stay locked, leaking around the sump area, reduced cleaning results

• Disconnect power and shut off water supply before servicing
• Remove the lower rack (and spray arm/filter as needed) to access the latch
• Release and remove the damaged latch; seat components and lock the new latch securely
• Reassemble and run a brief test to check operation and for leaks

This AC harness assembly carries incoming line voltage through the dishwasher to the control and other components. Replacing a damaged or heat-stressed harness restores safe, reliable power distribution and can resolve dead controls, no-start, or intermittent power issues.

• Distributes AC power from the dishwasher's power connection to the control and key components
• Provides correct wire routing with factory-terminated connectors for a secure fit
• Replace if wires are cut or melted, or if terminals show heat damage or looseness
• Common symptoms: won't power up or start, dead controls, intermittent power loss

• Disconnect power at the circuit breaker before servicing; verify power is off
• Remove toe-kick and access panels to reach the harness; note original routing and clips
• Move one connector at a time to the new harness; seat fully without forcing and avoid pinching
• Use the model's wiring diagram to confirm connections; secure wiring and reinstall panels

This vent gasket seals the dishwasher's door vent to keep steam and splashes inside the tub. Replacing a worn seal helps prevent leaks around the vent area and maintains proper moisture control during wash and dry cycles. What it does:

• Seals the vent housing to the inner door liner
• Helps prevent water and steam from escaping at the vent opening
• Addresses leaks or drips from the top/vent area of the door
• Replace if the original gasket is torn, flattened, brittle, or misshapen
• Helps maintain the intended airflow path through the vent assembly

• 1 vent gasket

• Disconnect power to the dishwasher before servicing
• Remove inner door panel screws to access the vent assembly
• Note gasket orientation; clean mating surfaces and seat the new gasket evenly without stretching
• Reassemble and run a short cycle to check the vent area for leaks

The Drain Hose is an OEM part for GE dishwashers. It removes wastewater from the dishwasher during each wash cycle.

A bad drain hose can occur due to wear and tear, blockages, or damage from kinks or leaks. If you notice symptoms such as water not draining properly from the dishwasher, leaks around the hose connection, or foul odors coming from the dishwasher, it may be time to replace this part.

Symptoms of a bad drain hose include:

• Improper drainage of water from the dishwasher
• Leaks around the hose connection
• Foul odors coming from the dishwasher

Replace your worn-out or damaged Drain Hose with this genuine OEM GE part to restore your dishwasher. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The DC Wire Harness Assembly is an OEM part for GE dishwashers. It provides proper electrical connections within the dishwasher, allowing parts to receive electricity to operate effectively. It connects the main control board to other important components such as the motor, pump, and sensors.

A bad DC wire harness assembly can lead to electrical malfunctions or failures within your dishwasher. Causes of a bad wire harness can include wear and tear over time, exposure to moisture or heat, or damage.

Symptoms of a bad DC wire harness assembly include:

• Intermittent or complete loss of power to the dishwasher
• Error codes or error messages displayed on the control panel
• Malfunctioning or unresponsive components such as the motor or pump
• Visible signs of wear, fraying, or damage to the wire harness

Replace your worn-out or damaged DC wire harness assembly with this genuine OEM GE part to restore your dishwasher. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.