Gdf570sgjobb Parts

This replacement vent restores proper air flow for non-fan appliance models, helping exhaust heat and cooking odors while protecting internal components from debris. A direct-fit OEM-style vent for units that do not use a powered blower. What it does:

• Channels exhaust air and heat away from the appliance to maintain safe operating temperatures
• Helps prevent buildup of debris and grease in the vent opening
• Can reduce intermittent overheating and cooking odors caused by a damaged or missing vent
• Restores proper fit and appearance at the appliance vent outlet

• One replacement vent

• Disconnect power to the appliance before beginning any service
• Access may require removing the lower kick panel or outer cover
• Use basic hand tools; align clips or screw holes and avoid forcing the part into place

This vent (dark grey) replaces a damaged or faded exterior vent cover on compatible GE appliances, helping restore appearance and maintain proper airflow. Use it to address visible damage or improve a loose or rattling vent. What it does:

• Covers and protects an appliance vent opening while allowing airflow through the cabinet or housing.
• Helps prevent drafts and keeps debris, lint, and small pests from entering the appliance interior.
• Stops rattling or vibration caused by a cracked or loose vent cover.
• Restores the original look by replacing a faded, cracked, or broken vent piece.

• Disconnect power (and gas, if applicable) before service and work on a cool, unplugged appliance.
• Remove trim or access panels as needed; keep screws and parts organized for reassembly.
• Check fit and orientation before final fastening to ensure proper airflow and sealing.

This wiring harness assembly connects and routes power and control signals for the appliance's AC components, restoring reliable electrical connections and proper operation when the original harness is damaged or worn. What it does:

• Provides the factory wiring path for AC-related components so they receive correct power and signals
• Replaces frayed, damaged, or burnt wires that can cause intermittent operation or failures
• Helps eliminate symptoms such as components not powering on, intermittent operation, or electrical arcing at connections
• Ensures connector fit and terminal alignment for a secure electrical connection

• Disconnect power before beginning any repair to avoid electrical shock
• Note or photograph wire routing and connector positions before removal for correct reinstallation
• Secure harness with existing clips or fasteners to prevent chafing and strain on terminals

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.

This SCR 8-18 silicon-controlled rectifier replaces the control semiconductor that switches and regulates power to heating or motor circuits in compatible appliances, restoring proper power delivery and control. It's a direct-fit electrical replacement part. What it does

• Acts as a switching device on control boards to allow or block current flow when signaled.
• Regulates power delivered to heating elements or motor circuits to enable proper operation.
• Commonly linked to symptoms like no heat or intermittent heating, motors that won't start, or erratic control-board behavior.
• Helps restore reliable on/off control when a failed SCR is causing open or shorted conditions.

• One SCR 8-18 silicon-controlled rectifier (WD02X10160).

• Always disconnect power before servicing the appliance to avoid shock.
• Handle the part carefully; avoid touching leads and use anti-static precautions if available.
• Inspect surrounding connectors and wiring for damage; replace any corroded terminals.

This control box bottom is the lower housing piece that secures and protects the appliance control board and related components. It restores a stable mounting surface and helps keep electronics shielded from vibration and debris. What it does:

• Provides the lower half of the control box housing to support and protect the control board
• Keeps wiring and connectors routed and held in place to prevent strain
• Replaces cracked, broken or warped housing that can expose electronics
• Helps stop rattling or movement of the control assembly that can cause intermittent controls

• Control box bottom

• Power off and unplug the appliance before starting any repair
• Handle the control board and connectors carefully to avoid electrostatic or mechanical damage
• This part typically installs with screws or clips; retain fasteners and note their locations during disassembly
• Inspect and address the electronics before reassembly

A silicon-controlled rectifier (SCR) used on appliance control boards to regulate power to motors, igniters or other loads. Replacing a faulty SCR can restore proper power switching and steady operation of the driven component. What it does:

• Acts as a power-switching semiconductor in appliance electronic control circuits to allow current flow only when triggered.
• Enables controlled delivery of voltage/current to motors, igniters and similar loads on the control board.
• A failing SCR can cause symptoms such as no power to a motor or igniter, intermittent operation, or complete failure of the driven component.
• Match the SCR package and electrical ratings to the control board before replacing.

• Disconnect all power to the appliance before accessing control electronics to avoid shock or damage.
• Take electrostatic-discharge (ESD) precautions; handle the SCR by its body and avoid touching leads.
• Package orientation and electrical ratings on the control board and wiring before installation.

This is a stainless steel hex washer-head screw used to fasten and secure components. Its integrated washer head provides a broad bearing surface for a tight, durable hold in appliance assemblies.

• Secures panels, brackets, and hardware to prevent looseness and vibration
• Restores proper fastening when originals are stripped, missing, or corroded
• Stainless construction helps resist rust in moisture-prone areas
• Common symptoms of a needed replacement include rattling, loose panels, or missing hardware

• Disconnect power and, if applicable, shut off water before servicing
• Use the correct nut driver or socket for the hex head to avoid stripping
• Replace any damaged or missing fasteners in matched pairs or sets for even clamping
• Do not overtighten; snug to manufacturer torque guidance when available

This tub trim replaces the decorative and protective ring around the appliance tub opening to restore a finished look and help keep the door seal aligned. It's a direct-fit cosmetic trim for specified GE tubs. What it does

• Covers the gap between the tub and door opening for a clean finished appearance
• Protects the tub edge and door seal from wear and fabric snags
• Helps maintain a snug seal by holding gasket edges in place
• Fixes issues like visible damage, cracks, or missing trim that affect appearance

• One tub trim (black/stainless) as shown

• Disconnect power and, if applicable, water supply before starting repairs
• Installation typically requires removing the door or front panel and snapping or screwing the trim into place — have basic hand tools ready
• Wear gloves to protect hands from sharp edges during removal/installation

This foam vent insert seals and cushions the dryer vent opening to reduce airflow leaks, vibration noise, and lint bypass. It helps maintain proper venting and stops drafts for more efficient drying and quieter operation. What it does:

• Forms a compressible seal around the dryer vent outlet to limit air and lint escape
• Cushions the vent connection to reduce rattling and vibration noise
• Helps prevent drafts from entering the cabinet when the dryer is off
• Supports consistent airflow path for better drying performance

• Designed for snap-in or press-fit installation at the vent opening; your model diagram for location
• Turn off and unplug the appliance before accessing the vent area
• Inspect surrounding vent and ductwork for damage or excessive lint; replace if needed

This floor plate is the OEM-style replacement that fits under the oven cavity to protect internal components and provide a stable cooking surface. Restores proper support and helps maintain even heat distribution in the lower oven area. What it does

• Covers and protects the oven's lower cavity from spills, drips, and falling debris
• Helps funnel heat and airflow for more consistent baking and roasting performance
• Prevents direct contact between food/drips and heating components
• Reduces corrosion and wear to inner oven parts caused by spills

• One floor plate as shown

• Designed to be installed in the lower oven cavity; for exact placement
• Remove power (unplug or shut off breaker) and allow the oven to cool before servicing
• Use appropriate gloves to avoid sharp edges; avoid forcing the part into place

This control panel assembly replaces the user interface on compatible GE laundry appliances to restore button control and display feedback. It gives back normal cycle selection and control responsiveness for reliable operation. What it does:

• Replaces the front user interface and button cluster so touchpads and keys register commands
• Restores readable display and status indicators used for cycle selection and options
• Resolves symptoms like unresponsive buttons, incorrect cycle selection, or lack of display feedback
• Interfaces with the appliance's main control to send user commands during operation

• Disconnect power before starting; ensure the appliance is unplugged or breaker is off
• Handle the panel and any attached ribbon cables gently to avoid damage
• Minor disassembly of the top or front panel may be required—keep track of screws and fasteners

This block foam door is an insulated panel that fits inside the appliance door to help reduce heat transfer and maintain consistent internal temperatures. It restores door insulation for more efficient cooling and temperature stability. What it does:

• Provides thermal insulation inside the door to reduce heat gain or loss
• Helps prevent frost buildup and cold spots by improving temperature consistency
• Supports efficient compressor cycling and can reduce energy waste when functioning properly
• Common symptom: uneven temperatures, visible condensation or frost on the door, or reduced cooling performance

• One block foam door

• Disconnect power before servicing and follow the appliance manufacturer's disassembly instructions
• May require removing the inner door liner and fasteners to access and replace the foam; keep hardware for reassembly
• Handle carefully to avoid damaging the foam or door liner; use appropriate hand protection

This latch cam engages the door latch mechanism so the appliance door closes and stays secure during cycles. A worn or broken cam can prevent the door from latching or cause the door to feel loose. What it does

• Rotates with the latch to lock the door securely during operation
• Ensures the latch striker catches and holds the door closed
• Common symptom: door won't stay latched or appliance won't start
• Common symptom: door feels loose, noisy, or intermittently opens during cycles

• One latch cam

• Disconnect power before starting any repair to avoid shock or injury
• Inspect surrounding latch components and replace any visibly damaged parts
• Use basic hand tools; keep track of small fasteners and alignment during reassembly
• Test door operation several times after installation to ensure secure engagement

This silicone light pipe guides an appliance's indicator or control panel light to the front-facing bezel so lights appear bright and centered. It restores proper light transmission for clearer, easier-to-read controls. What it does:

• Transmits LED or bulb light from the lamp housing to the control surface or bezel
• Helps ensure indicator lights and touch-control icons appear centered and visible
• Commonly replaced when the lens is cracked, torn, missing, or deformed
• Can resolve symptoms like dim, distorted, or missing panel illumination

• Disconnect power before servicing any electrical or control components
• Remove the control panel or bezel per your model's service instructions to access the light pipe
• Handle the silicone gently—avoid stretching or pinching that could deform the part
• Ensure the light pipe is fully seated in its housing and the bezel is reinstalled to prevent light leaks

Replacement control box top that restores the protective cover for the appliance control housing, keeping wiring and electronics enclosed for a cleaner appearance and safer operation. What it does:

• Covers and protects the control housing and internal wiring from dust, spills, and accidental contact
• Helps secure control components in place and maintain the appliance's factory appearance
• Commonly replaced when the original cover is cracked, broken, missing, or shows visible damage
• Can prevent loose wiring from catching or being accidentally disturbed

• One control box top

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Remove any screws or retainers securing the existing cover and lift off the old top; keep fasteners if reinstalling
• Align the replacement top and secure with the original fasteners; ensure wiring is routed and seated before closing