Gdt530ps0ss Parts

Note: This kit contains both the Circulation Pump and Drain Pump along with a harness and clamps. Due to a factory revision, the pumps are no longer offered individually.

The Clamp is an OEM replacement part for GE dishwashers. It holds and secures critical components such as tubing or hoses securely in place. Clamps play an important supporting role by fastening tubing and preventing kinking, both of which are essential for proper water flow and circulation within the dishwasher.

Causes of a bad clamp can include cracks, corrosion, or fatigue that causes the clamp to fail in its gripping function over time. Hoses or tubes may also wear down a clamp through constant vibration. 

Symptoms of a bad clamp include:

• Leaks from hoses, tubes or connections  
• Reduced water pressure or uneven spray patterns
• Moisture or water damage around connections
• Loose hoses that rub or chafe

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Friction Washer is an OEM component specifically designed for GE dishwashers. This friction washer is a thin circular part that creates resistance through surfaces rubbing together. It is often used beneath a mounting nut to prevent components from loosening during operation.  

Symptoms of a bad friction washer include loose or separating connections where the washer is installed, such as:

• Drain pump mounting fittings that become detached    
• Water connections that leak at the threaded joints
• Door handle mounts that allow play in the mechanism

Causes of failure can be cracks, wear or deformities in the washer that reduce its friction capabilities over time. Vibrations from use may also cause premature wear.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This dishwasher hose clamp secures internal hoses to pumps or fittings, helping prevent leaks and disconnections. Replace a weakened or damaged clamp to restore a tight, reliable seal at the connection.

• Provides clamping pressure to hold a hose on pump, sump, or drain fittings
• Helps stop water leaking at hose joints
• Resolves: loose or disconnected hoses, water under the unit/base, or poor draining from a slipped drain hose
• Replaces worn, rusted, or deformed clamps after service

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward as needed for access; place a towel or pan to catch residual water
• Seat the hose fully, then compress or tighten the clamp per its design; position just behind the hose barb bead
• Run a short cycle and inspect for leaks at the connection

This sump latch secures the filter/cover at the bottom of the dishwasher tub, locking the sump assembly in place to maintain proper water circulation and filtration while helping keep debris out of the wash pump.

• Locks the sump/filter cover securely to the tub opening
• Helps maintain consistent water flow and wash performance
• Helps prevent large debris from reaching the pump and spray system
• Typical signs it's worn or broken: cracked/missing latch, filter cover won't stay locked, leaking around the sump area, reduced cleaning results

• Disconnect power and shut off water supply before servicing
• Remove the lower rack (and spray arm/filter as needed) to access the latch
• Release and remove the damaged latch; seat components and lock the new latch securely
• Reassemble and run a brief test to check operation and for leaks

This vent gasket seals the dishwasher's door vent to keep steam and splashes inside the tub. Replacing a worn seal helps prevent leaks around the vent area and maintains proper moisture control during wash and dry cycles. What it does:

• Seals the vent housing to the inner door liner
• Helps prevent water and steam from escaping at the vent opening
• Addresses leaks or drips from the top/vent area of the door
• Replace if the original gasket is torn, flattened, brittle, or misshapen
• Helps maintain the intended airflow path through the vent assembly

• 1 vent gasket

• Disconnect power to the dishwasher before servicing
• Remove inner door panel screws to access the vent assembly
• Note gasket orientation; clean mating surfaces and seat the new gasket evenly without stretching
• Reassemble and run a short cycle to check the vent area for leaks

The Tine Block is an OEM component specifically designed for GE dishwashers. It refers to the horizontal arm that rotates during the wash cycle, hitting dishes with jets of water from hidden nozzles. Over many cycles of use, normal wear and tear can cause some degradation.

Causes of a bad tine block can include mineral and chemical buildup inside the nozzles over time, reducing water spray pressure.

Symptoms of a bad tine block include:  

• Poor water coverage of dishes failing to adequately rinse away soils
• Diminished cleaning performance as water pressure weakens
• Clogged or kinked supply hoses preventing consistent flow to nozzles

Replace yours today with this genuine GE OEM component to restore optimized washing. Proper spray coverage is needed to remove baked-on residues. This GE replacement part is compatible with Hotpoint, RCA, and select Kenmore models.

The Drain Hose is an OEM part for GE dishwashers. It removes wastewater from the dishwasher during each wash cycle.

A bad drain hose can occur due to wear and tear, blockages, or damage from kinks or leaks. If you notice symptoms such as water not draining properly from the dishwasher, leaks around the hose connection, or foul odors coming from the dishwasher, it may be time to replace this part.

Symptoms of a bad drain hose include:

• Improper drainage of water from the dishwasher
• Leaks around the hose connection
• Foul odors coming from the dishwasher

Replace your worn-out or damaged Drain Hose with this genuine OEM GE part to restore your dishwasher. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This control board clip secures the dishwasher's electronic control board to its mounting location, keeping it properly seated during operation. Replacing a damaged or missing clip helps prevent vibration, movement, and wire-connector strain.

• Holds the electronic control board firmly in its designated mount or housing
• Helps prevent board movement, rattling, and connector stress from vibration
• Replace if the clip is cracked, deformed, or missing
• Symptoms include a loose control assembly, rattling noises, or a board that won't stay seated

• Disconnect power at the breaker before servicing
• Access the control area; support the board when removing/installing the clip
• Handle the control board by the edges and observe ESD precautions
• Ensure the new clip is fully seated and the board is secure before reassembly

The DC Wire Harness Assembly is an OEM part for GE dishwashers. It provides proper electrical connections within the dishwasher, allowing parts to receive electricity to operate effectively. It connects the main control board to other important components such as the motor, pump, and sensors.

A bad DC wire harness assembly can lead to electrical malfunctions or failures within your dishwasher. Causes of a bad wire harness can include wear and tear over time, exposure to moisture or heat, or damage.

Symptoms of a bad DC wire harness assembly include:

• Intermittent or complete loss of power to the dishwasher
• Error codes or error messages displayed on the control panel
• Malfunctioning or unresponsive components such as the motor or pump
• Visible signs of wear, fraying, or damage to the wire harness

Replace your worn-out or damaged DC wire harness assembly with this genuine OEM GE part to restore your dishwasher. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This dielectric shield is a small heat-resistant insulator that protects ignition wiring and components from heat and prevents electrical arcing near burners. It helps maintain reliable spark ignition and reduces risk of shorts or damage from high temperatures. What it does:

• Shields spark module wires and electrode areas from direct heat exposure
• Helps prevent arcing and electrical shorts that can interrupt ignition
• Reduces risk of melted or damaged wire insulation near burners or ovens
• Commonly replaced when cracked, deformed, or showing burn marks that affect ignition

• Disconnect power (and gas if applicable) before servicing electrical or ignition components
• Inspect surrounding wiring and connectors; replace any damaged insulation or terminals
• Reinstall using original mounting hardware and ensure the shield fully covers the wire/electrode area

This rear third-rack end cap replaces the plastic end piece that secures the dishwasher's third rack to its track, restoring proper alignment and smooth sliding. Ideal for replacing cracked, broken, or missing rear end caps. What it does:

• Secures the third rack to the rear track so the rack stays aligned during use
• Provides a smooth contact point for the rack to slide on and reduces binding or catching
• Replaces cracked, broken or missing rear end caps that can cause rack drift or instability
• Common symptoms this part can fix: rack falls off track, rear rack sits unevenly, scraping or rough movement when sliding the rack

• Disconnect power to the dishwasher before beginning repairs for safety
• Pull the third rack out to access the end cap; remove the old cap and snap the replacement into place
• No special tools are typically required; a flat screwdriver can help if the old cap is stuck
• After installation, slide the rack in and out a few times to ensure secure fit and smooth movement

The Shelf Cup is an OEM component specifically designed for GE dishwashers. It is a rack shelf to provide stability for stemmed glasses. Subject to chemical deterioration and physical stresses, shelf cups can crack or warp over time. 

Symptoms of a bad shelf cup include:

• Cup no longer securely holds stemmed glasses in place during washing 
• Cracks along weakened seams 
• Deformation preventing proper nesting of stemware bases

Causes of shelf cup degradation relate to continuous exposure to hot water and washing chemicals combined with the physical stresses of loading and unloading stemware.

Replace yours today with this genuine GE OEM part to maintain rack integrity. Proper glass support ensures unobstructed wash spray coverage. This GE replacement part is compatible with some Hotpoint, RCA, and Kenmore models.

The Door Hinge Assembly right is an OEM component specifically designed for GE dishwashers. This door hinge assembly is located on the right side of the dishwasher door and is responsible for securely and smoothly mounting the door while enabling its opening and closing motion.  

Causes of a bad Door Hinge Assembly Right include loose or stripped screws, worn out bearings or bushings, or bent or fatigued metal from repeated use. 

Symptoms of a bad door hinge assembly include:

• The door not latching or sealing properly
• Difficulty opening and closing the door  
• Excessive noise or vibration from the door
• Misalignment that causes the door to rub or interfere

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.