Gdt530ps0ss Parts

This main conduit is a molded protective channel that routes and shields the appliance's wire harness to help prevent chafing and moisture exposure. It keeps wiring organized for safer, more reliable operation. What it does:

• Protects wiring from abrasion, pinching, and contact with sharp edges
• Keeps harness routed neatly to reduce strain and prevent snagging
• Helps limit exposure to moisture and debris around electrical connections
• Can be replaced when conduit is cracked, split, or missing to restore proper protection

• Disconnect power to the appliance before beginning any work
• Remove access panels as needed to reach the existing harness conduit
• Slide or snap the conduit into place, ensuring the harness is fully seated and not pinched
• Inspect wiring for damage; repair or replace any frayed insulation before reassembly

This replacement screw fastens and secures appliance components where a 1/4-28 threaded flange screw with an internal hex washer head is required. It restores proper fit and helps prevent movement or rattling of panels and assemblies. What it does:

• Secures panels, brackets and components that use a 1/4-28 threaded flange screw
• Internal hex washer head allows a compact, low-profile drive for tight spaces
• Helps stop looseness, vibration noise, and misalignment when the original fastener is missing or worn
• Matches OEM fit and fastening form for reliable reassembly

• Disconnect power and follow all appliance safety procedures before servicing
• Use the correct hex driver/socket to avoid stripping the head
• Tighten to snug fit—do not overtighten to avoid damaging threads or mating parts
• Replace with identical part number to ensure proper fit and function

The Door Hinge Assembly Left is an OEM component specifically designed for GE dishwashers. This door hinge assembly is located on the left side of the dishwasher door and is responsible for securely and smoothly mounting the door while enabling its opening and closing motion.  

Causes of a bad Door Hinge Assembly Left include loose or stripped screws, worn out bearings or bushings, or bent or fatigued metal from repeated use. 

Symptoms of a bad door hinge assembly include:

• The door not latching or sealing properly
• Difficulty opening and closing the door  
• Excessive noise or vibration from the door
• Misalignment that causes the door to rub or interfere

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This grounding plate is a stamped metal bracket that provides a secure electrical ground connection for the appliance, helping protect components and reduce shock risk. It's a direct-replacement part used where the appliance chassis requires a dedicated grounding point. What it does:

• Provides a reliable chassis-to-ground connection for electrical safety.
• Maintains a stable grounding path for control boards and metal panels.
• Helps address symptoms such as intermittent electrical faults, tripped breakers, or grounding-related error codes when a damaged or missing bracket is suspected.
• Replaces a corroded, bent, or broken grounding/mounting plate to restore proper contact.

• One grounding plate

• Turn off power to the appliance at the breaker and unplug before servicing.
• Mount to the specified chassis location using the original screws or fasteners; ensure clean, bare metal contact for a good ground.
• Do not modify the part; if screw holes or fasteners are missing, replace with OEM-specified hardware.

This mount tub assembly secures the washer tub to the cabinet and helps keep the tub properly aligned during operation for stable, quieter performance. It replaces a worn or damaged tub mounting component to reduce movement and noise. What it does:

• Supports and centers the wash tub inside the washer cabinet.
• Dampens tub movement to reduce vibration and noise during spin cycles.
• Helps maintain proper tub alignment to prevent rubbing or banging.
• Commonly used when visible tub wear, excessive vibration, or noise occurs.

• Recommended for users familiar with appliance disassembly; disconnect power and water before starting.
• Inspect surrounding seals, mounts, and suspension components and replace if worn.
• Use appropriate tools and follow the washer's service manual for reassembly torque and alignment.

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This user interface harness connects the oven/dryer control console to the main wiring, restoring reliable signal and power between the control and components. It's used when the console wiring is damaged or intermittent. What it does:

• Routes signals and power from the control panel to the appliance's main control and components
• Replaces frayed, burnt, or broken console wiring that can cause intermittent or non-working controls
• Helps fix symptoms such as unresponsive buttons, faulty display/LED behavior, or inconsistent cycle starts
• Preserves factory routing and connector fit for correct electrical connections

• One user interface wiring harness assembly

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock or damage
• Handle connectors gently and match keyed plugs; do not force connections
• Inspect mating connectors on the control and console for damage before installing

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This bottom-front foam insulation piece replaces the damaged or missing pad under the refrigerator's front base to help maintain proper airflow and thermal separation for more consistent cooling and reduced condensation risk. What it does:

• Replaces worn or crushed insulation at the refrigerator's lower front to restore intended thermal barrier.
• Helps limit warm air intrusion at the cabinet base that can contribute to frost or uneven temperatures.
• Reduces risk of condensation on the cabinet floor and improve overall efficiency when installed correctly.
• Restores correct spacing and support for the lower access area to prevent drafts.

• Disconnect power and remove the toe grille or front access panel before attempting replacement.
• Handle foam carefully — avoid tearing and align the pad to fit flush with surrounding insulation.
• Use existing clips/adhesive or OEM-recommended fasteners; replace adhesives if brittle or missing.