Gdt530ps0ss Parts

The Button is an OEM replacement part for GE dishwashers. It is a simple yet essential component responsible for allowing users to select wash cycles and activate various dishwasher functions. The button interfaces directly with the electronic control board to initiate commands.

Causes of a bad button include normal wear and tear through frequent use over time as well as possible malfunctions in the electrical switching components.

Symptoms of a bad button include:

• Failure to activate the intended function when pressed
• Unresponsive or non-functional buttons 
• Difficulty selecting desired wash cycles
• Cracked, faded, or illegible button labeling

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The handle asm is an OEM replacement part for stainless steel GE dishwashers. This handle assembly is responsible for allowing users to easily open and close the dishwasher door. 

Causes of a bad handle asm can include wear and tear from repeated use, damage from accidental impacts, or loose or broken mounting components. Over time, normal everyday use can cause handles to become loose, cracked, or nonfunctional. 

Symptoms of a bad handle asm include:

• The handle being loose, wobbly, or detached from the door 
• Cracking or splitting of the handle material
• Difficulty opening or closing the dishwasher door
• Inability to securely latch the door closed

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The User Interface Control Board (8 Button) is an OEM part for GE dishwashers with electronic controls. It houses the main board that coordinates signaling between all internal components and external buttons/displays.

Causes of a faulty control board can include water exposure damaging circuits or normal wear through constant flexing where ribbon cables attach. As the dishwasher’s central processor, boards experience stress from every cycle.

Symptoms include:

• Cycle cancelation or inability to start washes
• Error messages, lights, or sounds malfunctioning
• Internal temperature or dispenser issues
• Doors failing to lock or elements heating incorrectly

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This rail and end cap assembly replaces a worn or broken rack rail so the appliance rack glides smoothly and stays secured. It restores proper support and reduces catching, slipping, or noisy movement during use. What it does:

• Supports the appliance rack and provides a smooth sliding track.
• Replaces damaged or cracked rails and end caps that cause the rack to catch or bind.
• Helps prevent the rack from slipping off the track or dropping when extended.
• Reduces grinding, scraping, or other abnormal noises tied to worn rail components.

• Turn off power to the appliance (unplug or shut off the breaker) before starting.
• Remove the rack and align the rail with the track; snap or slide the end cap into place per the appliance's service instructions.
• Use basic hand tools if needed; avoid excessive force to prevent breakage.

Size: 8-32 t. Includes 12 screws.

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.

This SCR 8-18 silicon-controlled rectifier replaces the control semiconductor that switches and regulates power to heating or motor circuits in compatible appliances, restoring proper power delivery and control. It's a direct-fit electrical replacement part. What it does

• Acts as a switching device on control boards to allow or block current flow when signaled.
• Regulates power delivered to heating elements or motor circuits to enable proper operation.
• Commonly linked to symptoms like no heat or intermittent heating, motors that won't start, or erratic control-board behavior.
• Helps restore reliable on/off control when a failed SCR is causing open or shorted conditions.

• One SCR 8-18 silicon-controlled rectifier (WD02X10160).

• Always disconnect power before servicing the appliance to avoid shock.
• Handle the part carefully; avoid touching leads and use anti-static precautions if available.
• Inspect surrounding connectors and wiring for damage; replace any corroded terminals.

This user interface board controls the front-panel buttons and display so the appliance accepts commands and shows status. Replacing a faulty board restores button response and normal control-panel feedback. What it does:

• Registers button presses from the 8-button control pad and sends commands to the main control
• Provides the visual/status feedback shown on the console
• Commonly replaces boards that cause unresponsive buttons, intermittent control, or no display feedback
• Works as the appliance's front-panel input/output interface

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board by its edges and avoid touching circuitry or connector pins
• Verify connector orientation and secure all ribbon or wire harnesses before testing

This control box bottom is the lower housing piece that secures and protects the appliance control board and related components. It restores a stable mounting surface and helps keep electronics shielded from vibration and debris. What it does:

• Provides the lower half of the control box housing to support and protect the control board
• Keeps wiring and connectors routed and held in place to prevent strain
• Replaces cracked, broken or warped housing that can expose electronics
• Helps stop rattling or movement of the control assembly that can cause intermittent controls

• Control box bottom

• Power off and unplug the appliance before starting any repair
• Handle the control board and connectors carefully to avoid electrostatic or mechanical damage
• This part typically installs with screws or clips; retain fasteners and note their locations during disassembly
• Inspect and address the electronics before reassembly

A silicon-controlled rectifier (SCR) used on appliance control boards to regulate power to motors, igniters or other loads. Replacing a faulty SCR can restore proper power switching and steady operation of the driven component. What it does:

• Acts as a power-switching semiconductor in appliance electronic control circuits to allow current flow only when triggered.
• Enables controlled delivery of voltage/current to motors, igniters and similar loads on the control board.
• A failing SCR can cause symptoms such as no power to a motor or igniter, intermittent operation, or complete failure of the driven component.
• Match the SCR package and electrical ratings to the control board before replacing.

• Disconnect all power to the appliance before accessing control electronics to avoid shock or damage.
• Take electrostatic-discharge (ESD) precautions; handle the SCR by its body and avoid touching leads.
• Package orientation and electrical ratings on the control board and wiring before installation.

This is a stainless steel hex washer-head screw used to fasten and secure components. Its integrated washer head provides a broad bearing surface for a tight, durable hold in appliance assemblies.

• Secures panels, brackets, and hardware to prevent looseness and vibration
• Restores proper fastening when originals are stripped, missing, or corroded
• Stainless construction helps resist rust in moisture-prone areas
• Common symptoms of a needed replacement include rattling, loose panels, or missing hardware

• Disconnect power and, if applicable, shut off water before servicing
• Use the correct nut driver or socket for the hex head to avoid stripping
• Replace any damaged or missing fasteners in matched pairs or sets for even clamping
• Do not overtighten; snug to manufacturer torque guidance when available

This manual floor plate is the replacement cover that mounts at the appliance base to protect internal components and provide a finished surface. It restores the dryer's base appearance and helps prevent debris from entering the cabinet. What it does:

• Covers and protects the lower cabinet opening and components from dust and lint
• Helps maintain proper clearance and a finished look at the dryer base
• Replaces damaged, bent, or missing base plates that allow debris entry
• Can reduce rattles or vibration caused by a loose or warped floor plate

• One floor plate

• Disconnect power (and gas, if applicable) before servicing to avoid shock or injury
• Remove the dryer front or lower access panel per manufacturer instructions to access mounting screws
• Use correct-size screws and tighten to manufacturer torque; avoid over-bending the plate during installation

Left side roller cover.

This silicone light pipe guides the dishwasher's status LED to the visible surface of the door/control area. Replacing a discolored, cracked, or missing light guide restores clear, consistent indicator visibility during cycles. What it does:

• Channels light from the internal indicator LED to the exterior viewing point
• Helps maintain bright, focused status illumination
• Replaces a yellowed, deformed, or missing light pipe
• Common symptoms: status light dim/faint, only visible at an angle, or not visible at all

• 1 silicone light pipe

• Disconnect power to the dishwasher before service
• Open the door and access the control/indicator area as outlined in your service information
• Match the orientation of the original piece and press the new light pipe fully into place
• Verify indicator operation before reassembling panels

The User Interface Housing is an OEM replacement part for GE dishwashers. Located at the front of the console, it houses the control panel responsible for cycle/option navigation.

The housing protects sensitive electronic components from water damage and physical impact. Its sturdy construction allows for responsive touch inputs without flex or play in the assembly. 

Symptoms of a bad user interface housing include:

• Warping or cracks exposing circuitry to damage
• Faulty sealing allowing moisture penetration
• Difficulty registering button presses from structural defects
• Ill-fitting installation negatively impacting usability

Causes can be repetitive openings allowing entry of dirt/moisture into critical areas and use over the years breaking down seals and weakening materials.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This block foam door is an insulated panel that fits inside the appliance door to help reduce heat transfer and maintain consistent internal temperatures. It restores door insulation for more efficient cooling and temperature stability. What it does:

• Provides thermal insulation inside the door to reduce heat gain or loss
• Helps prevent frost buildup and cold spots by improving temperature consistency
• Supports efficient compressor cycling and can reduce energy waste when functioning properly
• Common symptom: uneven temperatures, visible condensation or frost on the door, or reduced cooling performance

• One block foam door

• Disconnect power before servicing and follow the appliance manufacturer's disassembly instructions
• May require removing the inner door liner and fasteners to access and replace the foam; keep hardware for reassembly
• Handle carefully to avoid damaging the foam or door liner; use appropriate hand protection