Gdt535 Parts

This insulation toe kick is a replacement panel that fits the refrigerator base to help block drafts and protect internal components under the cabinet. It restores the factory barrier that supports temperature stability and efficient operation. What it does

• Replaces damaged or missing toe-kick insulation that lets cold air escape beneath the appliance
• Helps reduce drafts and minimize warm air intrusion into the refrigerator cavity
• Protects wiring and components located in the toe-kick area from dust and debris
• Can help prevent uneven cooling or frost buildup that results from compromised base insulation

• One insulation toe kick panel

• Disconnect power to the appliance before starting any service
• Remove the existing toe kick/board and fasteners, then position the replacement so mounting tabs align with factory slots
• Avoid compressing or tearing the insulation; maintain original fit for proper performance

The Outer Door Assembly Kit is an OEM replacement part for GE dishwashers. It includes all of the key external door components needed for proper function, including the inner and outer door panels, sealing gaskets, locking mechanisms, and design elements. 

Causes of a bad outer door assembly can include wear and tear over time, especially to sealing gaskets which are prone to cracking. Higher humidity levels can accelerate this. Physical damage such as dents or cracks in the plastic panels will also necessitate replacement.

Symptoms of a bad outer door assembly include:

• Water leaks into the interior due to compromised seals 
• Difficulty closing and locking the door securely
• Gaskets that no longer create an airtight seal around the door perimeter
• Loose, sagging, or damaged door panels

This replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This silicone light pipe guides the dishwasher's status LED to the visible surface of the door/control area. Replacing a discolored, cracked, or missing light guide restores clear, consistent indicator visibility during cycles. What it does:

• Channels light from the internal indicator LED to the exterior viewing point
• Helps maintain bright, focused status illumination
• Replaces a yellowed, deformed, or missing light pipe
• Common symptoms: status light dim/faint, only visible at an angle, or not visible at all

• 1 silicone light pipe

• Disconnect power to the dishwasher before service
• Open the door and access the control/indicator area as outlined in your service information
• Match the orientation of the original piece and press the new light pipe fully into place
• Verify indicator operation before reassembling panels

This outer door assembly replaces a damaged or worn exterior door panel and restores the appliance's appearance and proper door closure. The stainless steel finish provides a durable, corrosion-resistant surface that matches factory styling. What it does:

• Replaces the exterior door panel to restore correct door fit and finish
• Helps ensure the door closes securely and reduces gaps that can cause heat or air loss
• Stops visible damage such as dents, scratches, or warped edges from affecting operation
• Reduces rattling or vibration caused by a loose or bent outer door

• Disconnect power (and gas supply, if applicable) before starting any repair
• Handle edges and glass carefully to avoid cuts or breakage
• Basic hand tools are typically required; follow the OEM service manual for proper disassembly and reassembly

This door handle assembly replaces a broken or worn handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed to match the original part's fit and function. What it does

• Replaces a cracked, loose or broken door handle so the door opens and closes properly
• Provides a solid handhold for everyday use and prevents sharp edges from exposed damage
• Restores correct alignment and engagement with the door trim and latch area
• Helps eliminate rattling or wobble caused by a failing handle

• One complete door handle assembly

• Disconnect power to the appliance before starting any repair
• Remove exterior trim or access panels as required to reach mounting screws; retain hardware if in good condition
• Handle is secured with screws or clips—inspect fasteners and striker/latch for wear during install

This white door handle assembly replaces a broken, cracked or loose refrigerator door handle to restore a secure grip and clean appearance. Fits compatible GE refrigerators and installs in place of the original handle assembly. What it does:

• Provides a secure, ergonomic grip for opening and closing the refrigerator door
• Replaces broken, cracked or loose handles that affect door operation or appearance
• Restores proper handle alignment so the door opens smoothly
• Helps prevent further damage from using a compromised handle

• Remove food and any items from the door; support the door while working to avoid strain or damage
• Use common hand tools (screwdriver, socket) to remove mounting screws and transfer any trim or mounting hardware as needed
• Keep original screws and clips unless the new assembly explicitly includes replacements

This door foam block cushions and seals the appliance door, helping reduce vibration and prevent drafts or leaks where the door meets the cabinet. It replaces worn or damaged foam to restore a tight, even door fit and quieter operation. What it does:

• Replaces the foam block located on the appliance door to restore proper sealing and contact
• Helps reduce noise and vibration caused by door movement or uneven contact
• Minimizes air or water leakage at the door seal when original foam is compressed or degraded
• Simple, passive component—no electrical function

• Install by removing the door trim or access panel per your model's service instructions
• Ensure the mounting surface is clean and dry before placing the foam for best adhesion and fit
• Use basic hand tools; avoid forcing the foam into place to prevent tearing
• Disconnect power and follow manufacturer safety guidance before servicing the appliance

This handle bracket secures the appliance handle to the door or front panel, restoring a firm, reliable grip and preventing the handle from wobbling or detaching during normal use. Ideal for replacing a cracked, bent, or loose bracket. What it does

• Provides a stable mounting point for the appliance handle so the handle stays firmly attached
• Replaces worn, cracked, or broken brackets that cause a loose or sagging handle
• Helps stop rattling or shifting when opening and closing the door
• Restores proper alignment and fit of the handle assembly

• One handle bracket

• Disconnect power (and gas if applicable) before beginning any repair
• Installation typically requires removing the handle and/or inner door panel and fastening the bracket with screws or clips
• Keep track of small fasteners and work on a soft surface to avoid scratching finish

This replacement foam block cushions and seals the top control area to reduce vibration and help keep the control assembly securely positioned. It restores proper fit and helps prevent noises or rubbing from loose panels. What it does:

• Cushions the top control assembly to reduce vibration and rattle during operation
• Helps keep control housing and wiring harnesses stable and correctly positioned
• Provides a protective barrier to limit dust and light moisture intrusion around controls
• Addresses symptoms like buzzing/rattling noises or a loosely seated control panel

• Disconnect power to the appliance before starting any repair
• Access the top control area per your model's service instructions; remove trim or console as needed
• Remove old foam and adhesive residue; press replacement foam into correct position ensuring proper orientation

This lens and adhesive assembly replaces a worn, cracked, or cloudy control/display lens and secures the lens to the appliance for a clean, finished appearance and protected electronics. Restores visibility and prevents debris entry behind the lens. What it does:

• Replaces a damaged or discolored control/display lens to improve visibility and aesthetics
• Includes adhesive to secure the lens and maintain a sealed fit over controls or indicators
• Protects underlying buttons, LEDs, and circuit components from dust and moisture
• Helps restore original appearance after impact, cracking, or peeling

• Disconnect power before servicing to avoid shock or unintended appliance operation
• Clean and dry mounting surface; remove old adhesive residues for proper adhesion
• Align lens carefully, press into place, and hold per adhesive manufacturer recommendations
• Allow adhesive to set fully before reconnecting power or using the appliance

This Button and Graphic Assembly replaces a worn or damaged control-panel button and its printed overlay so controls are readable and easy to press. It restores the button surface and visible markings for normal user operation. What it does:

• Replaces a single control-panel button and the printed graphic/overlay
• Restores legible markings and tactile button feel
• Helps resolve faded, scratched, or peeling button graphics
• Addresses buttons that stick or feel unresponsive due to worn front-surface parts

• Disconnect the appliance from power before servicing to avoid shock
• Remove any required trim or fascia carefully to access the button assembly
• Align the new assembly and press or secure per the original mounting—do not force

This button and graphic assembly replaces a worn or damaged control panel button and its overlay graphic to restore clear tactile feedback and readable markings for cycle selection and settings. It fits into the appliance's console for direct user control. What it does:

• Replaces a damaged or faded control panel button and the printed graphic overlay
• Restores readable labels for accurate selection of cycles and options
• Helps resolve issues where a button is loose, missing, or visually worn
• Works with the console's existing switch contacts to transmit user commands

• One button and graphic assembly as shown

• Remove power to the appliance before attempting any service
• Installation typically requires removing the console trim to access the button assembly
• Handle the graphic overlay carefully to avoid creasing or smudging printed markings
• If you encounter damaged mounting clips or internal switches, replace those parts as needed

This vent adapter connects a dryer's exhaust outlet to the home vent duct, restoring a secure exhaust path and helping maintain proper airflow for efficient drying. Durable construction resists cracking and air leaks at the connection. What it does:

• Provides a secure transition between the dryer exhaust and the vent duct to prevent air leakage
• Helps restore proper airflow to improve drying performance and reduce run times
• Replaces cracked, broken, or loose outlet adapters that can allow lint or moisture escape
• Keeps the exhaust pathway sealed to reduce noise and vibration at the connection

• Disconnect power to the appliance before starting any work; for gas dryers, turn off the gas supply as well
• Remove the old adapter and clean lint from the exhaust outlet and duct before installing the new adapter
• Use appropriate clamps or fasteners to secure the adapter and the vent duct per manufacturer instructions

This 10-18 x 5/8 screw secures panels and components on compatible appliances, restoring proper fit and preventing rattles or loose parts. It's a direct-fit fastener used where the OEM called for a #10-18 thread, 5/8" length screw. What it does

• Fastens trim, panels, brackets, and internal components to restore secure fit
• Stops vibration-related rattling or shifting caused by missing or loose screws
• Matches OEM thread and length to ensure proper engagement and alignment
• Used wherever a #10-18 x 5/8 machine/tap screw is specified in the parts list

• One screw (10-18 x 5/8)

• Disconnect power before working on the appliance and follow all safety precautions
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace any stripped or damaged mating threads or hardware for a secure repair