Gdt535 Parts

This SCR 8-18 silicon-controlled rectifier replaces the control semiconductor that switches and regulates power to heating or motor circuits in compatible appliances, restoring proper power delivery and control. It's a direct-fit electrical replacement part. What it does

• Acts as a switching device on control boards to allow or block current flow when signaled.
• Regulates power delivered to heating elements or motor circuits to enable proper operation.
• Commonly linked to symptoms like no heat or intermittent heating, motors that won't start, or erratic control-board behavior.
• Helps restore reliable on/off control when a failed SCR is causing open or shorted conditions.

• One SCR 8-18 silicon-controlled rectifier (WD02X10160).

• Always disconnect power before servicing the appliance to avoid shock.
• Handle the part carefully; avoid touching leads and use anti-static precautions if available.
• Inspect surrounding connectors and wiring for damage; replace any corroded terminals.

This 8-button user interface control board replaces the front panel electronics that let you start and control appliance cycles. It restores button responsiveness and on-screen command input so the appliance accepts user selections reliably. What it does:

• Provides the front-panel electronics and button inputs for cycle selection and menu navigation
• Replaces worn, unresponsive, or intermittent front-panel controls
• Resolves symptoms like non-working buttons, no response when selecting cycles, or erratic control behavior
• Interfaces with the appliance's main control to send user commands

• One 8-button user interface control board as shown

• Disconnect power to the appliance before attempting service to avoid shock or damage
• Handle the board by its edges and avoid touching contacts or components
• Some disassembly of the control console or door panel may be required; keep screws and small parts organized

The Configured User Interface Control Board is an OEM part for GE dishwashers. It is designed to provide communication and control of the dishwasher, allowing the selection and customization of settings and cycles. It provides a user-friendly interface, displaying essential information and options for washing.

A bad configured user interface control board can lead to issues such as unresponsive buttons, error codes, or a complete failure of the dishwasher to operate. Causes of a bad configured user interface control board can include electrical failures, wear and tear over time, or damage due to power surges or mishandling.

Symptoms of a bad configured user interface control board include:

• Unresponsive or non-functioning buttons on the control panel
• Error codes or error messages displayed on the user interface
• Inconsistent or incorrect readings of cycle settings or time remaining
• Complete failure of the dishwasher to start or operate

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This control box bottom is the lower housing piece that secures and protects the appliance control board and related components. It restores a stable mounting surface and helps keep electronics shielded from vibration and debris. What it does:

• Provides the lower half of the control box housing to support and protect the control board
• Keeps wiring and connectors routed and held in place to prevent strain
• Replaces cracked, broken or warped housing that can expose electronics
• Helps stop rattling or movement of the control assembly that can cause intermittent controls

• Control box bottom

• Power off and unplug the appliance before starting any repair
• Handle the control board and connectors carefully to avoid electrostatic or mechanical damage
• This part typically installs with screws or clips; retain fasteners and note their locations during disassembly
• Inspect and address the electronics before reassembly

A silicon-controlled rectifier (SCR) used on appliance control boards to regulate power to motors, igniters or other loads. Replacing a faulty SCR can restore proper power switching and steady operation of the driven component. What it does:

• Acts as a power-switching semiconductor in appliance electronic control circuits to allow current flow only when triggered.
• Enables controlled delivery of voltage/current to motors, igniters and similar loads on the control board.
• A failing SCR can cause symptoms such as no power to a motor or igniter, intermittent operation, or complete failure of the driven component.
• Match the SCR package and electrical ratings to the control board before replacing.

• Disconnect all power to the appliance before accessing control electronics to avoid shock or damage.
• Take electrostatic-discharge (ESD) precautions; handle the SCR by its body and avoid touching leads.
• Package orientation and electrical ratings on the control board and wiring before installation.

This is a stainless steel hex washer-head screw used to fasten and secure components. Its integrated washer head provides a broad bearing surface for a tight, durable hold in appliance assemblies.

• Secures panels, brackets, and hardware to prevent looseness and vibration
• Restores proper fastening when originals are stripped, missing, or corroded
• Stainless construction helps resist rust in moisture-prone areas
• Common symptoms of a needed replacement include rattling, loose panels, or missing hardware

• Disconnect power and, if applicable, shut off water before servicing
• Use the correct nut driver or socket for the hex head to avoid stripping
• Replace any damaged or missing fasteners in matched pairs or sets for even clamping
• Do not overtighten; snug to manufacturer torque guidance when available

Left side roller cover.

This silicone light pipe guides the dishwasher's status LED to the visible surface of the door/control area. Replacing a discolored, cracked, or missing light guide restores clear, consistent indicator visibility during cycles. What it does:

• Channels light from the internal indicator LED to the exterior viewing point
• Helps maintain bright, focused status illumination
• Replaces a yellowed, deformed, or missing light pipe
• Common symptoms: status light dim/faint, only visible at an angle, or not visible at all

• 1 silicone light pipe

• Disconnect power to the dishwasher before service
• Open the door and access the control/indicator area as outlined in your service information
• Match the orientation of the original piece and press the new light pipe fully into place
• Verify indicator operation before reassembling panels

The User Interface Housing is an OEM replacement part for GE dishwashers. Located at the front of the console, it houses the control panel responsible for cycle/option navigation.

The housing protects sensitive electronic components from water damage and physical impact. Its sturdy construction allows for responsive touch inputs without flex or play in the assembly. 

Symptoms of a bad user interface housing include:

• Warping or cracks exposing circuitry to damage
• Faulty sealing allowing moisture penetration
• Difficulty registering button presses from structural defects
• Ill-fitting installation negatively impacting usability

Causes can be repetitive openings allowing entry of dirt/moisture into critical areas and use over the years breaking down seals and weakening materials.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This floor plate is the OEM-style replacement that fits under the oven cavity to protect internal components and provide a stable cooking surface. Restores proper support and helps maintain even heat distribution in the lower oven area. What it does

• Covers and protects the oven's lower cavity from spills, drips, and falling debris
• Helps funnel heat and airflow for more consistent baking and roasting performance
• Prevents direct contact between food/drips and heating components
• Reduces corrosion and wear to inner oven parts caused by spills

• One floor plate as shown

• Designed to be installed in the lower oven cavity; for exact placement
• Remove power (unplug or shut off breaker) and allow the oven to cool before servicing
• Use appropriate gloves to avoid sharp edges; avoid forcing the part into place

This bracket handle is the replacement mounting bracket that secures a refrigerator or freezer door handle, restoring proper handle alignment and a secure grip. It helps keep the door handle firmly attached and functioning. What it does:

• Secures the door handle to the appliance door so the handle stays mounted and aligned
• Restores a loose, wobbly, or detached handle for reliable opening and closing
• Prevents further wear on handle fasteners by providing the proper mounting support
• Matches OEM fit and function for straightforward replacement

• One replacement bracket handle

• Basic hand tools typically required; handle hardware may need removal first
• Follow OEM instructions and use correct fasteners; replace any damaged screws or anchors
• Disconnect power to the appliance (or keep door open/unloaded) and work safely to avoid pinching or dropping the door

The Screw is an OEM part for GE dishwashers. This screw is designed for various applications, including securing and fastening components in your GE appliance.

A bad screw can result in issues such as loose or unstable components, improper functioning, or even potential damage to other parts. Causes of a bad screw can include wear and tear over time, improper installation, or exposure to extreme conditions.

Symptoms of a bad Screw include:

• Components becoming loose or detached
• Parts not securely fastened
• Unusual noises or vibrations during operation
• Visible signs of damage or wear on the screw

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This rail and end cap assembly secures a refrigerator shelf or door bin and restores a stable mounting surface for stored items. It replaces worn or damaged rails that allow shelves to sag or detach. What it does

• Replaces a damaged shelf rail and end cap to restore proper shelf support
• Holds the shelf/bin in position so items stay level and don't slide off
• Stops rattling or movement caused by a loose or broken rail assembly
• Fits where an original molded rail/end cap has cracked, worn, or failed

• One rail and end cap assembly as shown

• Remove food and bins from the area before starting; support the shelf while removing the old part
• Use basic hand tools; avoid forcing parts — align tabs and slide the rail into place until it snaps or seats
• Disconnect power if required by your model before working near electrical components

This latch cam engages the door latch mechanism so the appliance door closes and stays secure during cycles. A worn or broken cam can prevent the door from latching or cause the door to feel loose. What it does

• Rotates with the latch to lock the door securely during operation
• Ensures the latch striker catches and holds the door closed
• Common symptom: door won't stay latched or appliance won't start
• Common symptom: door feels loose, noisy, or intermittently opens during cycles

• One latch cam

• Disconnect power before starting any repair to avoid shock or injury
• Inspect surrounding latch components and replace any visibly damaged parts
• Use basic hand tools; keep track of small fasteners and alignment during reassembly
• Test door operation several times after installation to ensure secure engagement

This door handle fastener secures a refrigerator/freezer door handle to the appliance, restoring stable grip and proper handle alignment. Small but essential for keeping the handle firmly attached during use. What it does:

• Secures the door handle to the door mounting post or bracket
• Stops handle wobble, shifting, or partial detachment under normal use
• Restores proper handle alignment for comfortable opening and closing
• Helps prevent further wear to handle mounts caused by a loose fastener

• One door handle fastener

• Typically installs from inside the handle area; handle removal may be required
• Use correct screwdriver or tool to avoid stripping the fastener head
• Work carefully around door edges and gasket to avoid damage

This coated frame wire assembly replaces a damaged or corroded structural wire used to support and retain internal components. The protective coating helps resist rust and reduces wear for reliable, long-lasting support. What it does:

• Provides structural support and shape for the appliance frame or internal assembly
• Secures or positions components that attach to the wire frame
• Protects against corrosion and wear with a durable coating
• Common symptom indications: visible bending, breakage, loose or rattling parts, or components no longer held in place

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools; handle carefully to avoid sharp edges and protect the coating.
• Replace only with the same part to ensure fit and function.