Gdt535pgj0bbpsjoss Parts

This grounding plate is a stamped metal bracket that provides a secure electrical ground connection for the appliance, helping protect components and reduce shock risk. It's a direct-replacement part used where the appliance chassis requires a dedicated grounding point. What it does:

• Provides a reliable chassis-to-ground connection for electrical safety.
• Maintains a stable grounding path for control boards and metal panels.
• Helps address symptoms such as intermittent electrical faults, tripped breakers, or grounding-related error codes when a damaged or missing bracket is suspected.
• Replaces a corroded, bent, or broken grounding/mounting plate to restore proper contact.

• One grounding plate

• Turn off power to the appliance at the breaker and unplug before servicing.
• Mount to the specified chassis location using the original screws or fasteners; ensure clean, bare metal contact for a good ground.
• Do not modify the part; if screw holes or fasteners are missing, replace with OEM-specified hardware.

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This small plastic clip secures a refrigerator's wiring conduit or harness to the cabinet, keeping wires routed and protected from abrasion. It helps reduce strain on connections and prevents wires from contacting moving parts. What it does:

• Holds wiring conduit or harness in place to maintain neat routing
• Prevents wires from rubbing on sharp edges or moving components
• Reduces strain on electrical connections that can cause intermittent faults
• Helps maintain safe separation between wiring and high-heat or mechanical areas

• Turn power off at the appliance and unplug before inspecting or replacing wiring clips
• Remove access panels only as needed to reach the clip; avoid stressing surrounding wires
• Snap the clip into the original mounting slot or replace any damaged fasteners for a secure fit
• If wires show damage or burns, replace the wiring/harness

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.

This bracket handle is the replacement mounting bracket that secures a refrigerator or freezer door handle, restoring proper handle alignment and a secure grip. It helps keep the door handle firmly attached and functioning. What it does:

• Secures the door handle to the appliance door so the handle stays mounted and aligned
• Restores a loose, wobbly, or detached handle for reliable opening and closing
• Prevents further wear on handle fasteners by providing the proper mounting support
• Matches OEM fit and function for straightforward replacement

• One replacement bracket handle

• Basic hand tools typically required; handle hardware may need removal first
• Follow OEM instructions and use correct fasteners; replace any damaged screws or anchors
• Disconnect power to the appliance (or keep door open/unloaded) and work safely to avoid pinching or dropping the door

This door handle assembly replaces a broken or worn handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed to match the original part's fit and function. What it does

• Replaces a cracked, loose or broken door handle so the door opens and closes properly
• Provides a solid handhold for everyday use and prevents sharp edges from exposed damage
• Restores correct alignment and engagement with the door trim and latch area
• Helps eliminate rattling or wobble caused by a failing handle

• One complete door handle assembly

• Disconnect power to the appliance before starting any repair
• Remove exterior trim or access panels as required to reach mounting screws; retain hardware if in good condition
• Handle is secured with screws or clips—inspect fasteners and striker/latch for wear during install

This door foam block cushions and seals the appliance door, helping reduce vibration and prevent drafts or leaks where the door meets the cabinet. It replaces worn or damaged foam to restore a tight, even door fit and quieter operation. What it does:

• Replaces the foam block located on the appliance door to restore proper sealing and contact
• Helps reduce noise and vibration caused by door movement or uneven contact
• Minimizes air or water leakage at the door seal when original foam is compressed or degraded
• Simple, passive component—no electrical function

• Install by removing the door trim or access panel per your model's service instructions
• Ensure the mounting surface is clean and dry before placing the foam for best adhesion and fit
• Use basic hand tools; avoid forcing the foam into place to prevent tearing
• Disconnect power and follow manufacturer safety guidance before servicing the appliance

This replacement foam block cushions and seals the top control area to reduce vibration and help keep the control assembly securely positioned. It restores proper fit and helps prevent noises or rubbing from loose panels. What it does:

• Cushions the top control assembly to reduce vibration and rattle during operation
• Helps keep control housing and wiring harnesses stable and correctly positioned
• Provides a protective barrier to limit dust and light moisture intrusion around controls
• Addresses symptoms like buzzing/rattling noises or a loosely seated control panel

• Disconnect power to the appliance before starting any repair
• Access the top control area per your model's service instructions; remove trim or console as needed
• Remove old foam and adhesive residue; press replacement foam into correct position ensuring proper orientation

This lens and adhesive assembly replaces a worn, cracked, or cloudy control/display lens and secures the lens to the appliance for a clean, finished appearance and protected electronics. Restores visibility and prevents debris entry behind the lens. What it does:

• Replaces a damaged or discolored control/display lens to improve visibility and aesthetics
• Includes adhesive to secure the lens and maintain a sealed fit over controls or indicators
• Protects underlying buttons, LEDs, and circuit components from dust and moisture
• Helps restore original appearance after impact, cracking, or peeling

• Disconnect power before servicing to avoid shock or unintended appliance operation
• Clean and dry mounting surface; remove old adhesive residues for proper adhesion
• Align lens carefully, press into place, and hold per adhesive manufacturer recommendations
• Allow adhesive to set fully before reconnecting power or using the appliance

This Button and Graphic Assembly replaces a worn or damaged control-panel button and its printed overlay so controls are readable and easy to press. It restores the button surface and visible markings for normal user operation. What it does:

• Replaces a single control-panel button and the printed graphic/overlay
• Restores legible markings and tactile button feel
• Helps resolve faded, scratched, or peeling button graphics
• Addresses buttons that stick or feel unresponsive due to worn front-surface parts

• Disconnect the appliance from power before servicing to avoid shock
• Remove any required trim or fascia carefully to access the button assembly
• Align the new assembly and press or secure per the original mounting—do not force