Gdt535psm0wss Parts

This top-control console is the panel at the upper edge of the dishwasher door. It forms the interface area for selecting cycles and protects the components behind it, helping keep the controls aligned and presentable.

• Houses and protects the user interface at the top edge of the door
• Provides the interface area for cycle and option selection
• Restores fit and appearance when the original console is cracked, warped, or loose
• Help if buttons feel misaligned due to a damaged console housing

• Disconnect power at the breaker before servicing; shut off water if moving the appliance.
• Open the door and remove perimeter screws to separate inner/outer door panels; support wiring when removing the console.
• Transfer any model-specific components from the original console to the new console; avoid pinching harnesses during reassembly.
• Restore power and selections engage and the door latches properly.

This detergent cup cover attaches to the dishwasher's dispenser to seal the detergent compartment until the control releases it. Replacing a damaged cover prevents early washout and restores consistent detergent release for reliable cleaning results.

• Covers and seals the dispenser's detergent cup
• Opens at the proper time to release detergent into the wash
• Helps prevent detergent leaking or washing out too early
• Typical symptoms: cup won't stay closed, poor cleaning, visible damage to the cover/hinge

• Disconnect power to the dishwasher before servicing
• Handle hinge tabs carefully; transfer and tension the existing spring/pin if your model uses them
• After installation, close and manually release the cover to ensure smooth operation before running a cycle

The Rack Slide is an OEM replacement part for GE dishwashers. It refers to the components that allow the upper rack to glide smoothly in and out. Allowing for continuous movement over extended use, the slides can degrade, causing friction or binding that restricts access to dishes.

Symptoms of bad rack slides include:

• Difficulty fully extending or retracting the racks   
• Noisy operation accompanied by grinding or squeaking noises
• Racks that do not run smoothly and become stuck partially open

Causes of rack slides becoming bad are normal wear and tear from loading and unloading dishes over many years. Motion parts wear out more quickly than stationary components.

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This replacement flood stem holds and guides the washer's water-level float so the machine can detect and control water levels. Replaces a worn or damaged mounting tube to restore reliable float operation. What it does:

• Secures and positions the water-level float inside the tub or housing
• Allows the float to move freely so the machine senses proper water level
• Helps prevent overfill and incorrect fill-level behavior when functioning correctly
• Common symptoms of a faulty unit: incorrect water level, washer overfills or fills unevenly, or the machine shows fill/drain issues

• One flood stem

• Disconnect power and turn off the water supply before starting any repair
• Replacement typically requires access to the washer cabinet/top or inner tub area
• Handle the float and tube gently to avoid damage; ensure proper seating and alignment during reassembly
• After installation, run a short fill/drain cycle to confirm correct float operation and that there are no leaks

This arm hinge assembly restores smooth, controlled movement of a hinged component in your dishwasher, helping maintain proper alignment and reliable operation. Replacing a worn or broken hinge can reduce binding, squeaks, and misalignment that affect performance. What it does:

• Provides the pivot point and support for a hinged assembly
• Maintains alignment to ensure correct engagement and sealing
• Helps ensure smooth opening/closing motion without binding
• Replaces a hinge arm that is cracked, bent, or worn
• Common signs: stiff or uneven movement, squeaking or popping noises, misalignment, or visible damage

• 1 arm hinge assembly

• Disconnect power and water before servicing
• Support the door or movable assembly to relieve tension while removing the hinge
• Note orientation and transfer any side-specific hardware from the original part
• After installation, check for smooth motion and proper alignment before restoring power and water

Arm hinge assembly is the pivoting hinge that supports and guides the appliance door, restoring smooth, stable opening and closing for proper alignment and operation. Replacing a worn hinge helps stop sagging, misalignment, and scraping noises. What it does:

• Supports the door pivot and maintains proper hinge alignment for smooth opening/closing.
• Helps the door latch and seal correctly by keeping the door level and aligned.
• Common symptoms: door hangs or sags, door won't close or latch, rubbing or scraping noises during movement.
• Replaces a bent, worn, or broken hinge arm to restore normal door operation.

• Disconnect power before starting any service.
• Use proper hand tools and support the door while removing/installing the hinge to avoid damage or injury.
• Align the hinge and operate the door several times before fully tightening fasteners; follow manufacturer torque/fastening guidance if available.

This is a 6-20 machine screw, 3/8 inch length, used to secure trim, panels, or small components on compatible cooking appliances. Replacing a missing or damaged screw helps keep parts tight and prevents rattles or shifting during use.

• Fastens brackets, panels, or trim in the appliance chassis
• Helps restore a secure fit when the original screw is stripped or lost
• Can resolve issues like loose trim, minor rattling, or misaligned panels
• Nickel finish for corrosion resistance in warm, humid environments

• Disconnect power and allow appliance to cool before servicing
• Remove only the necessary adjacent fasteners to access the mounting point
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Replace any missing clips or spacers originally used with the screw

This gray dishwasher vent releases moist air from the tub during the dry cycle on hybrid-dry models. Replacing a damaged vent helps control steam and condensation for more consistent drying and a cleaner door area.

• Directs steam out of the tub during hybrid drying
• Helps reduce interior condensation for improved drying results
• If cracked, warped, or loose, you may notice steam escaping at the door, moisture on the console, or dishes that stay wet
• Visible damage or discoloration around the vent area can indicate replacement is needed

• Disconnect power at the circuit breaker before servicing
• Access is typically through the inner door panel; handle sharp edges and note original orientation
• Ensure the vent seats evenly and fasteners are secure without overtightening
• Run a short cycle and check for proper venting/steam control after reassembly

The Flat Chrome Badge is an OEM part for GE refrigerators. It is responsible for displaying the GE logo and model information on the front of the refrigerator. As an identifiable brand marker, the badge contributes to the overall appearance and style of the appliance.

Causes of a bad badge can include damage from impacts or bending, discoloration or tarnishing over time, or simple wear and tear that renders the badge appearance faded or illegible.

Symptoms of a bad badge include:

• A missing, loose, crooked or illegible badge
• Signs of denting, scratching or corrosion
• An outdated or inconsistent badge that doesn't match the model

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This 10-32 x 1/4-inch zinc-plated screw secures internal panels and hardware in select dishwashers. Replace a missing, stripped, or corroded fastener to restore a tight fit and help prevent vibration or loosening during operation.

• Fastens brackets, panels, or components that use a 10-32 machine thread
• Replaces hardware that is missing, stripped, or rusted
• Helps reduce rattling or vibration from loose assemblies
• Supports proper component alignment for reliable operation

• Disconnect power and water supply before servicing the appliance
• Remove the old fastener and verify thread size and length match before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace damaged clips, nuts, or inserts that won't hold a 10-32 screw securely

This fill funnel hose directs incoming water from the inlet assembly into the tub through the fill funnel. Replacing a worn or cracked hose helps stop leaks and restores a reliable, sealed fill path for consistent wash performance.

• Carries water from the inlet assembly through the fill funnel into the tub
• Maintains a watertight path to prevent external leaks
• Symptoms of failure: dripping during fill, puddles beneath the unit, or visible cracks/splits in the hose
• A significant leak may lead to low water level or extended fill times

• Disconnect power and shut off the water supply before servicing
• Remove the toe-kick/kickplate; pulling the dishwasher forward may be needed for access
• Place a towel or pan to catch residual water; move clamps, remove the old hose, and fully seat the new hose on both fittings
• Re-secure clamps, restore water and power, and run a short fill to check for leaks before reinstalling panels

This control box top is the plastic cover that protects the appliance's control board and user controls while keeping the front of the console finished and safe. It helps prevent dust, moisture, and accidental contact with internal electronics. What it does

• Covers and protects the control board and internal wiring behind the console.
• Provides the mounting surface and openings for buttons, knobs or touch interfaces.
• Prevents dirt, lint, and moisture from reaching sensitive electronics.
• Restores a secure, finished appearance to a damaged or cracked console area.

• Always disconnect power to the appliance before beginning work to avoid electrical shock.
• Remove any bezel, screws or clips securing the old top and transfer any required mounting hardware or trim pieces.
• Handle the control board and connectors with care; avoid touching circuit components or bending contact pins.

The Wash Pump Kit is an OEM component specifically designed for GE dishwashers. The wash pump works diligently during cycles to circulate water containing detergent throughout the dishwasher, providing optimal cleaning. 

Causes of a bad wash pump can include mineral buildup in pump components due to hard water, worn seals or bearings from continuous use, or damage from foreign objects in dishes obstructing the pump.

Symptoms of a bad Wash Pump Kit include:

• Dishes not getting fully cleaned after cycles  
• Standing water remaining in the bottom of the dishwasher
• Strange noises or vibrations coming from the pump area
• Error messages related to water detection or draining issues

Replace yours today with this genuine OEM GE part for reliable water circulation during each cycle. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This bracket support hinge secures the appliance door to the cabinet, providing a stable pivot point for smooth opening and closing. Replaces a worn or broken hinge bracket to help restore proper door alignment and operation. What it does:

• Provides a mounting point for the door hinge to keep the door aligned and secure
• Prevents door sagging, uneven gaps, or misaligned closing caused by a damaged bracket
• Reduces wobble, clicking, or binding at the hinge area during door movement
• Works as the structural support between the door and cabinet to maintain proper sealing/contact

• One bracket support hinge

• Disconnect power and empty the door (shelves/drawers) before starting for safety and easier handling
• Support the door while removing/installing the hinge to prevent dropping or damage
• Use basic hand tools; follow OEM torque and alignment guidance when tightening fasteners

This replacement vent restores proper air flow for non-fan appliance models, helping exhaust heat and cooking odors while protecting internal components from debris. A direct-fit OEM-style vent for units that do not use a powered blower. What it does:

• Channels exhaust air and heat away from the appliance to maintain safe operating temperatures
• Helps prevent buildup of debris and grease in the vent opening
• Can reduce intermittent overheating and cooking odors caused by a damaged or missing vent
• Restores proper fit and appearance at the appliance vent outlet

• One replacement vent

• Disconnect power to the appliance before beginning any service
• Access may require removing the lower kick panel or outer cover
• Use basic hand tools; align clips or screw holes and avoid forcing the part into place

This bracket support hinge helps secure and guide the appliance hinge assembly, restoring proper door alignment and reliable movement. It replaces a worn or damaged hinge support to improve fit and operation. What it does:

• Supports the hinge assembly to maintain correct door alignment
• Reduces door sag, binding, or uneven closing caused by a damaged bracket
• Restores smooth hinge movement and helps prevent further wear to hinge components
• Commonly used when the door feels loose or the hinge appears bent or broken

• One bracket support hinge

• Turn off and unplug the appliance before starting any repair
• Remove surrounding panels or trim as needed to access the hinge per your model's service instructions
• Use appropriate tools and keep fasteners organized for reassembly
• Inspect and replace additional components as needed