Gdt5800ssf8ss Parts

This wiring harness assembly connects DC-powered components to the appliance's control system, restoring reliable electrical and signal paths for proper operation. It replaces a damaged or worn harness so circuits can function safely. What it does:

• Routes power and signal connections between the control board and DC-driven components
• Provides secure, keyed connectors to prevent mis-mating and intermittent contacts
• Helps stop failures caused by frayed wires, broken terminals, or melted insulation
• Common symptom fixes: appliance won't start or runs intermittently, loss of motor power, or electrical error codes

• Disconnect power to the appliance before beginning any service
• Inspect connectors and wire routing; replace if insulation or terminals are damaged
• Route and secure the harness per OEM routing to avoid heat and abrasion

The Outer Door Assembly Kit is an OEM replacement part for GE dishwashers. It includes all of the key external door components needed for proper function, including the inner and outer door panels, sealing gaskets, locking mechanisms, and design elements. 

Causes of a bad outer door assembly can include wear and tear over time, especially to sealing gaskets which are prone to cracking. Higher humidity levels can accelerate this. Physical damage such as dents or cracks in the plastic panels will also necessitate replacement.

Symptoms of a bad outer door assembly include:

• Water leaks into the interior due to compromised seals 
• Difficulty closing and locking the door securely
• Gaskets that no longer create an airtight seal around the door perimeter
• Loose, sagging, or damaged door panels

This replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This door handle assembly replaces a broken or worn handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed to match the original part's fit and function. What it does

• Replaces a cracked, loose or broken door handle so the door opens and closes properly
• Provides a solid handhold for everyday use and prevents sharp edges from exposed damage
• Restores correct alignment and engagement with the door trim and latch area
• Helps eliminate rattling or wobble caused by a failing handle

• One complete door handle assembly

• Disconnect power to the appliance before starting any repair
• Remove exterior trim or access panels as required to reach mounting screws; retain hardware if in good condition
• Handle is secured with screws or clips—inspect fasteners and striker/latch for wear during install

This white door handle assembly replaces a broken, cracked or loose refrigerator door handle to restore a secure grip and clean appearance. Fits compatible GE refrigerators and installs in place of the original handle assembly. What it does:

• Provides a secure, ergonomic grip for opening and closing the refrigerator door
• Replaces broken, cracked or loose handles that affect door operation or appearance
• Restores proper handle alignment so the door opens smoothly
• Helps prevent further damage from using a compromised handle

• Remove food and any items from the door; support the door while working to avoid strain or damage
• Use common hand tools (screwdriver, socket) to remove mounting screws and transfer any trim or mounting hardware as needed
• Keep original screws and clips unless the new assembly explicitly includes replacements

This lens and adhesive assembly replaces a worn, cracked, or cloudy control/display lens and secures the lens to the appliance for a clean, finished appearance and protected electronics. Restores visibility and prevents debris entry behind the lens. What it does:

• Replaces a damaged or discolored control/display lens to improve visibility and aesthetics
• Includes adhesive to secure the lens and maintain a sealed fit over controls or indicators
• Protects underlying buttons, LEDs, and circuit components from dust and moisture
• Helps restore original appearance after impact, cracking, or peeling

• Disconnect power before servicing to avoid shock or unintended appliance operation
• Clean and dry mounting surface; remove old adhesive residues for proper adhesion
• Align lens carefully, press into place, and hold per adhesive manufacturer recommendations
• Allow adhesive to set fully before reconnecting power or using the appliance

This shield wash pump circulates dishwasher wash water so dishes get cleaned and rinsed effectively. Replaces a failed or noisy pump to restore normal wash performance and water movement inside the tub. What it does:

• Circulates wash and rinse water through the spray arms for proper cleaning and rinsing
• Helps maintain consistent water flow and pressure during the wash cycle
• Reduces loud noise or grinding when a worn pump or motor is replaced
• Commonly replaced when the dishwasher pauses mid-cycle, won't complete cycles, or leaks from the pump area

• One complete shield wash pump assembly (pump with motor and mounting shield as shown)

• Recommended for users comfortable with appliance disassembly; disconnect power and water before starting
• Inspect seals and mounting gaskets and replace if worn to prevent leaks
• Tighten hose clamps and check hose routing during reassembly to avoid kinks or stress

Left-hand door trim that restores the finished edge and appearance of the refrigerator door. Replaces cracked, dented, or missing trim to improve the door's cosmetic look and help maintain a proper seal area. What it does:

• Replaces the left-hand exterior door trim piece to restore the door's finished appearance and cover exposed edges.
• Helps protect the door edge from chips, scratches, and impact damage that cause visible wear.
• Addresses symptoms like cracked, warped, loose, or missing trim that create rough edges or an unfinished look.

• May require basic hand tools and removal of adjacent trim, gasket, or fasteners—follow the OEM service instructions for your model.
• If repair work exposes wiring, switches, or controls, disconnect power before starting.
• Handle trim edges and clips carefully to avoid damage; keep original fasteners and clips for reuse when possible.

This front tub spacer cushions and positions the washer tub to reduce vibration and keep the inner and outer tubs properly aligned during operation. It helps maintain smooth spin cycles and prevents metal-to-metal contact. What it does:

• Centers and supports the front of the washer tub to maintain proper drum alignment
• Absorbs movement to reduce vibration and noise during spin
• Prevents rubbing or contact between the tub and cabinet components
• Can be associated with symptoms like excessive vibration, rubbing sounds, or off-center spins

• Designed for direct replacement; inspect surrounding seals and mounts during service
• Use basic hand tools; follow the washer's service manual for safe disassembly and reassembly
• Disconnect power and water supply before beginning any repair

This Button and Graphic Assembly replaces a worn or damaged control-panel button and its printed overlay so controls are readable and easy to press. It restores the button surface and visible markings for normal user operation. What it does:

• Replaces a single control-panel button and the printed graphic/overlay
• Restores legible markings and tactile button feel
• Helps resolve faded, scratched, or peeling button graphics
• Addresses buttons that stick or feel unresponsive due to worn front-surface parts

• Disconnect the appliance from power before servicing to avoid shock
• Remove any required trim or fascia carefully to access the button assembly
• Align the new assembly and press or secure per the original mounting—do not force

This tub top trim replaces the decorative/top trim that surrounds the washer tub opening to restore a finished look and help keep the inner tub sealed from the cabinet. It's a direct-fit exterior trim piece for top-load washers. What it does

• Replaces damaged, cracked, or warped tub top trim that lets water spray toward the cabinet
• Restores the washer's finished appearance around the tub opening
• Helps keep the tub's edge covered to reduce splash and debris entry
• Useful when the original trim is loose, bent, or cosmetically worn

• One tub top trim piece as shown

• Turn off power and water to the washer before beginning any service
• May require removing the cabinet or control console depending on model; follow the OEM service instructions
• Use proper fasteners and gaskets from the OEM parts list if required; only install what is included

This button and graphic assembly replaces a worn or damaged control panel button and its overlay graphic to restore clear tactile feedback and readable markings for cycle selection and settings. It fits into the appliance's console for direct user control. What it does:

• Replaces a damaged or faded control panel button and the printed graphic overlay
• Restores readable labels for accurate selection of cycles and options
• Helps resolve issues where a button is loose, missing, or visually worn
• Works with the console's existing switch contacts to transmit user commands

• One button and graphic assembly as shown

• Remove power to the appliance before attempting any service
• Installation typically requires removing the console trim to access the button assembly
• Handle the graphic overlay carefully to avoid creasing or smudging printed markings
• If you encounter damaged mounting clips or internal switches, replace those parts as needed

This friction washer is a small spacer that helps reduce metal-on-metal contact and keeps rotating parts aligned for smooth operation. It prevents excess wear and helps reduce noise from rubbing or binding components. What it does:

• Acts as a low-friction spacer between rotating parts to minimize wear and friction
• Keeps shafts, drums, or pulleys positioned correctly to maintain smooth rotation
• Helps reduce rubbing noises, squeaks, or binding caused by worn or missing washers
• Supports long-term component life by preventing direct metal-to-metal contact

• Disconnect power to the appliance before beginning any repair
• Inspect mating surfaces and replace any damaged bearings, seals, or fasteners
• Install with the same orientation as the original part; do not force into place
• Use the exact part number when ordering replacements to ensure proper fit

This 10-18 x 5/8 screw secures panels and components on compatible appliances, restoring proper fit and preventing rattles or loose parts. It's a direct-fit fastener used where the OEM called for a #10-18 thread, 5/8" length screw. What it does

• Fastens trim, panels, brackets, and internal components to restore secure fit
• Stops vibration-related rattling or shifting caused by missing or loose screws
• Matches OEM thread and length to ensure proper engagement and alignment
• Used wherever a #10-18 x 5/8 machine/tap screw is specified in the parts list

• One screw (10-18 x 5/8)

• Disconnect power before working on the appliance and follow all safety precautions
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace any stripped or damaged mating threads or hardware for a secure repair

A replacement rack cover handle for the dishwasher upper rack that restores a secure grip and smooth rack operation. Replaces a cracked, broken or missing handle so you can load and unload dishes more easily. What it does

• Attaches to the front of the upper rack to provide a handle for pulling the rack in and out.
• Restores proper alignment and prevents the rack cover from snagging when loading dishes.
• Replaces a handle that is cracked, loose, or broken and reduces the risk of cuts from sharp plastic edges.
• Helps maintain normal rack movement and prevents accidental rack drops.

• One rack cover handle.

• Disconnect power to the dishwasher before servicing to avoid electrical hazard.
• Empty the rack and remove any clips or stops as needed to access the handle mounting points.
• Requires basic hand tools (screwdriver or nut driver) to remove and install fasteners; keep track of any small clips or screws.
• Test rack movement after installation and do not overtighten fasteners to avoid cracking the replacement part.