Gdt580sgfwww Parts

This replacement lower dishrack restores smooth rolling and secure loading on the bottom level of your dishwasher, helping plates, bowls, and pots stay in place for consistent spray coverage and reliable cleaning results. What it does

• Organizes and supports dishes, cookware, and utensils on the lower level during wash and dry cycles
• Rolls in and out on the tub rails for easy loading and unloading
• Positions items for effective spray coverage and drainage
• Replace if tines are broken, coating is peeling/rusting, the rack derails or won't roll smoothly, or items tip over

• One lower dishrack

• Turn off power to the dishwasher before servicing
• Pull the old lower rack straight out; release/remove any rack stops if present
• Transfer any removable accessories from the old rack (such as utensil basket or clips), if needed
• Slide the new rack onto the rails and verify smooth operation

This high loop drain hose creates the required elevated drain loop to help prevent dishwasher backflow and ensure proper drainage. It replaces a worn or damaged drain loop and restores correct drain routing for reliable performance. What it does:

• Forms the high loop in the dishwasher drain line to reduce risk of sink water siphoning back into the appliance
• Directs wastewater from the dishwasher into the household drain properly
• Helps avoid intermittent draining issues caused by a collapsed or split drain loop
• Fits into existing drain connections—used where an elevated drain loop is required

• Designed for in-line replacement; route the hose to create a high loop secured under the countertop or cabinet as shown in the appliance installer instructions
• Turn off power and water supply to the appliance before performing service
• Inspect clamps and fittings and replace if corroded; ensure all connections are snug but not over-tightened

The Wash Pump Kit is an OEM part for GE dishwashers. This part circulates water through the dishwasher during the wash cycle. The wash pump ensures that water is sprayed onto the dishes, effectively cleaning and rinsing them.

Causes of a bad wash pump can include regular wear and tear, clogging from debris or hard water deposits, or mechanical failure.  

Symptoms of a bad wash pump kit include:

• The dishwasher not cleaning dishes properly
• Low water pressure during the wash cycle
• Unusual noises coming from the pump area
• Water not circulating properly inside the dishwasher

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Diverter Passive Assembly is an OEM component specially engineered for GE dishwashers. It is located within the dishwasher's valve body and helps control water flow during cycles. The diverter passive assembly redirects water through internal ports, directing it to different spray arm fittings at appropriate times.

Causes of a bad diverter passive assembly include mineral buildup clogging water ports or deteriorating seals and gaskets due to extended use. 

Symptoms of a defective diverter passive assembly are:

• Issues with water distribution and pressure during wash cycles 
• Uneven cleaning performance 
• Excess water usage 
• Odd sounds emanating from the valve body area

Regular maintenance helps flush out mineral deposits to ensure long-lasting performance. Replace your old assembly with this genuine GE OEM part for reliable water control.

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

The Clamp is an OEM replacement part for GE dishwashers. It holds and secures critical components such as tubing or hoses securely in place. Clamps play an important supporting role by fastening tubing and preventing kinking, both of which are essential for proper water flow and circulation within the dishwasher.

Causes of a bad clamp can include cracks, corrosion, or fatigue that causes the clamp to fail in its gripping function over time. Hoses or tubes may also wear down a clamp through constant vibration. 

Symptoms of a bad clamp include:

• Leaks from hoses, tubes or connections  
• Reduced water pressure or uneven spray patterns
• Moisture or water damage around connections
• Loose hoses that rub or chafe

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This upper spray arm gasket seals the hub where the arm connects, keeping wash water routed through the upper arm. Replace a worn seal to restore upper-rack spray performance and reduce internal leaks or water bypass.

• Creates a watertight seal at the upper spray arm connection
• Helps maintain proper water pressure and spray pattern to the upper rack
• Replaces a cracked, flattened, or missing gasket
• Common symptoms: poor upper-rack cleaning, weak/erratic upper spray, dripping at the spray arm hub inside the tub

• Disconnect power and water supply before servicing
• Remove the upper spray arm (and rack if needed) per your model's procedure
• Lift out the old gasket; clean the sealing surfaces; press the new gasket fully and evenly into place
• Reassemble and run a short test cycle to check for proper spray and leaks

The Friction Washer is an OEM component specifically designed for GE dishwashers. This friction washer is a thin circular part that creates resistance through surfaces rubbing together. It is often used beneath a mounting nut to prevent components from loosening during operation.  

Symptoms of a bad friction washer include loose or separating connections where the washer is installed, such as:

• Drain pump mounting fittings that become detached    
• Water connections that leak at the threaded joints
• Door handle mounts that allow play in the mechanism

Causes of failure can be cracks, wear or deformities in the washer that reduce its friction capabilities over time. Vibrations from use may also cause premature wear.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This left-hand attachment strip secures trim and panels for a clean, finished fit on compatible GE appliances. It helps maintain proper alignment and prevents gaps that can collect dirt or allow panels to shift during use. What it does:

• Attaches and stabilizes a side trim or panel to the appliance cabinet
• Keeps door/side trim aligned to reduce rattling or shifting
• Helps maintain an even, finished appearance along the appliance edge
• Addresses symptoms like loose trim, visible gaps, or panel movement

• One left-hand attachment strip

• Remove power to the appliance (or disconnect power source) before starting work
• Use basic hand tools; avoid forcing parts to prevent breakage
• Replace with OEM-specified hardware if fasteners are missing or damaged

This dishwasher hose clamp secures internal hoses to pumps or fittings, helping prevent leaks and disconnections. Replace a weakened or damaged clamp to restore a tight, reliable seal at the connection.

• Provides clamping pressure to hold a hose on pump, sump, or drain fittings
• Helps stop water leaking at hose joints
• Resolves: loose or disconnected hoses, water under the unit/base, or poor draining from a slipped drain hose
• Replaces worn, rusted, or deformed clamps after service

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward as needed for access; place a towel or pan to catch residual water
• Seat the hose fully, then compress or tighten the clamp per its design; position just behind the hose barb bead
• Run a short cycle and inspect for leaks at the connection

The Sump Manifold is an OEM component specifically designed for GE dishwashers. It is located within the sump pan and functions as an integral part of the dishwasher's drainage and circulation system. The sump manifold directs water flow during draining and refilling, ensuring proper water distribution to different areas of the dishwasher for cleaning and rinsing cycles. 

Symptoms of a bad sump manifold include:

• Issues with draining and water drainage
• Leaks within the sump pan area 
• Reduced or uneven water pressure during wash cycles
• Improper filling or distribution of water

Over time, components inside the sump manifold can break down or become clogged due to mineral buildup or leftover food particles. Regular maintenance is recommended to keep the sump manifold functioning optimally. 

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This control board clip secures the dishwasher's electronic control board to its mounting location, keeping it properly seated during operation. Replacing a damaged or missing clip helps prevent vibration, movement, and wire-connector strain.

• Holds the electronic control board firmly in its designated mount or housing
• Helps prevent board movement, rattling, and connector stress from vibration
• Replace if the clip is cracked, deformed, or missing
• Symptoms include a loose control assembly, rattling noises, or a board that won't stay seated

• Disconnect power at the breaker before servicing
• Access the control area; support the board when removing/installing the clip
• Handle the control board by the edges and observe ESD precautions
• Ensure the new clip is fully seated and the board is secure before reassembly

This dielectric shield is a small heat-resistant insulator that protects ignition wiring and components from heat and prevents electrical arcing near burners. It helps maintain reliable spark ignition and reduces risk of shorts or damage from high temperatures. What it does:

• Shields spark module wires and electrode areas from direct heat exposure
• Helps prevent arcing and electrical shorts that can interrupt ignition
• Reduces risk of melted or damaged wire insulation near burners or ovens
• Commonly replaced when cracked, deformed, or showing burn marks that affect ignition

• Disconnect power (and gas if applicable) before servicing electrical or ignition components
• Inspect surrounding wiring and connectors; replace any damaged insulation or terminals
• Reinstall using original mounting hardware and ensure the shield fully covers the wire/electrode area

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

This replacement screw fastens and secures appliance components where a 1/4-28 threaded flange screw with an internal hex washer head is required. It restores proper fit and helps prevent movement or rattling of panels and assemblies. What it does:

• Secures panels, brackets and components that use a 1/4-28 threaded flange screw
• Internal hex washer head allows a compact, low-profile drive for tight spaces
• Helps stop looseness, vibration noise, and misalignment when the original fastener is missing or worn
• Matches OEM fit and fastening form for reliable reassembly

• Disconnect power and follow all appliance safety procedures before servicing
• Use the correct hex driver/socket to avoid stripping the head
• Tighten to snug fit—do not overtighten to avoid damaging threads or mating parts
• Replace with identical part number to ensure proper fit and function