Gdt625psjoss Dishwaher Parts

This grounding plate is a stamped metal bracket that provides a secure electrical ground connection for the appliance, helping protect components and reduce shock risk. It's a direct-replacement part used where the appliance chassis requires a dedicated grounding point. What it does:

• Provides a reliable chassis-to-ground connection for electrical safety.
• Maintains a stable grounding path for control boards and metal panels.
• Helps address symptoms such as intermittent electrical faults, tripped breakers, or grounding-related error codes when a damaged or missing bracket is suspected.
• Replaces a corroded, bent, or broken grounding/mounting plate to restore proper contact.

• One grounding plate

• Turn off power to the appliance at the breaker and unplug before servicing.
• Mount to the specified chassis location using the original screws or fasteners; ensure clean, bare metal contact for a good ground.
• Do not modify the part; if screw holes or fasteners are missing, replace with OEM-specified hardware.

This small plastic clip secures a refrigerator's wiring conduit or harness to the cabinet, keeping wires routed and protected from abrasion. It helps reduce strain on connections and prevents wires from contacting moving parts. What it does:

• Holds wiring conduit or harness in place to maintain neat routing
• Prevents wires from rubbing on sharp edges or moving components
• Reduces strain on electrical connections that can cause intermittent faults
• Helps maintain safe separation between wiring and high-heat or mechanical areas

• Turn power off at the appliance and unplug before inspecting or replacing wiring clips
• Remove access panels only as needed to reach the clip; avoid stressing surrounding wires
• Snap the clip into the original mounting slot or replace any damaged fasteners for a secure fit
• If wires show damage or burns, replace the wiring/harness

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This bottom-front foam insulation piece replaces the damaged or missing pad under the refrigerator's front base to help maintain proper airflow and thermal separation for more consistent cooling and reduced condensation risk. What it does:

• Replaces worn or crushed insulation at the refrigerator's lower front to restore intended thermal barrier.
• Helps limit warm air intrusion at the cabinet base that can contribute to frost or uneven temperatures.
• Reduces risk of condensation on the cabinet floor and improve overall efficiency when installed correctly.
• Restores correct spacing and support for the lower access area to prevent drafts.

• Disconnect power and remove the toe grille or front access panel before attempting replacement.
• Handle foam carefully — avoid tearing and align the pad to fit flush with surrounding insulation.
• Use existing clips/adhesive or OEM-recommended fasteners; replace adhesives if brittle or missing.

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Silverware Basket is an OEM component specifically designed for GE dishwashers. It provides a separator zone to organize knives, forks, and spoons for effective cleaning. Plastic baskets endure exposure to hot water and chemicals with each cycle. Over years of usage, the plastic material can weaken or crack.

Symptoms of a bad silverware basket include:

• Loose or sagging support mesh that allows utensils to shift positions
• Cracks along welded seams where pieces connect
• Missing divider tabs or prongs used to organize different utensils 

Causes leading to failure are typically repetitive stresses from loading and unloading of silverware, along with chemical degradation speeding up plastic fatigue.

Replace yours today with this genuine GE OEM part to maintain proper wash and rinse water flow around delicates. Proper basket organization is key for cleaning performance. This GE replacement part is compatible with some Hotpoint, RCA, and Kenmore models.

This outer door assembly replaces a damaged or worn exterior door panel and restores the appliance's appearance and proper door closure. The stainless steel finish provides a durable, corrosion-resistant surface that matches factory styling. What it does:

• Replaces the exterior door panel to restore correct door fit and finish
• Helps ensure the door closes securely and reduces gaps that can cause heat or air loss
• Stops visible damage such as dents, scratches, or warped edges from affecting operation
• Reduces rattling or vibration caused by a loose or bent outer door

• Disconnect power (and gas supply, if applicable) before starting any repair
• Handle edges and glass carefully to avoid cuts or breakage
• Basic hand tools are typically required; follow the OEM service manual for proper disassembly and reassembly

This door foam block cushions and seals the appliance door, helping reduce vibration and prevent drafts or leaks where the door meets the cabinet. It replaces worn or damaged foam to restore a tight, even door fit and quieter operation. What it does:

• Replaces the foam block located on the appliance door to restore proper sealing and contact
• Helps reduce noise and vibration caused by door movement or uneven contact
• Minimizes air or water leakage at the door seal when original foam is compressed or degraded
• Simple, passive component—no electrical function

• Install by removing the door trim or access panel per your model's service instructions
• Ensure the mounting surface is clean and dry before placing the foam for best adhesion and fit
• Use basic hand tools; avoid forcing the foam into place to prevent tearing
• Disconnect power and follow manufacturer safety guidance before servicing the appliance

This replacement foam block cushions and seals the top control area to reduce vibration and help keep the control assembly securely positioned. It restores proper fit and helps prevent noises or rubbing from loose panels. What it does:

• Cushions the top control assembly to reduce vibration and rattle during operation
• Helps keep control housing and wiring harnesses stable and correctly positioned
• Provides a protective barrier to limit dust and light moisture intrusion around controls
• Addresses symptoms like buzzing/rattling noises or a loosely seated control panel

• Disconnect power to the appliance before starting any repair
• Access the top control area per your model's service instructions; remove trim or console as needed
• Remove old foam and adhesive residue; press replacement foam into correct position ensuring proper orientation

This lens and adhesive assembly replaces a worn, cracked, or cloudy control/display lens and secures the lens to the appliance for a clean, finished appearance and protected electronics. Restores visibility and prevents debris entry behind the lens. What it does:

• Replaces a damaged or discolored control/display lens to improve visibility and aesthetics
• Includes adhesive to secure the lens and maintain a sealed fit over controls or indicators
• Protects underlying buttons, LEDs, and circuit components from dust and moisture
• Helps restore original appearance after impact, cracking, or peeling

• Disconnect power before servicing to avoid shock or unintended appliance operation
• Clean and dry mounting surface; remove old adhesive residues for proper adhesion
• Align lens carefully, press into place, and hold per adhesive manufacturer recommendations
• Allow adhesive to set fully before reconnecting power or using the appliance

This vent adapter connects a dryer's exhaust outlet to the home vent duct, restoring a secure exhaust path and helping maintain proper airflow for efficient drying. Durable construction resists cracking and air leaks at the connection. What it does:

• Provides a secure transition between the dryer exhaust and the vent duct to prevent air leakage
• Helps restore proper airflow to improve drying performance and reduce run times
• Replaces cracked, broken, or loose outlet adapters that can allow lint or moisture escape
• Keeps the exhaust pathway sealed to reduce noise and vibration at the connection

• Disconnect power to the appliance before starting any work; for gas dryers, turn off the gas supply as well
• Remove the old adapter and clean lint from the exhaust outlet and duct before installing the new adapter
• Use appropriate clamps or fasteners to secure the adapter and the vent duct per manufacturer instructions