Gdt665ssn2ss Parts

This AC harness is the wiring assembly that connects the air conditioning system's electrical components, providing organized power and signal routing for reliable operation. Replaces worn or damaged harnesses to restore proper electrical connections. What it does:

• Routes power and low-voltage signals between A/C components (compressor, fan, controls) for coordinated operation
• Helps prevent intermittent faults caused by loose, frayed, or corroded wires
• Can resolve symptoms such as the A/C not starting, intermittent compressor or fan operation, or blown fuses
• Maintains correct connector fit and wire routing to reduce stress on terminals

• One AC wire harness

• Turn off power at the breaker and confirm zero voltage before servicing
• Match connectors and wire colors; secure harness along original routing to avoid heat or moving-part damage
• Inspect connector terminals and mating components for corrosion—clean or replace as needed

This tub-mount sleeve is a replacement mounting sleeve that helps secure the washer tub and reduce wear where the tub attaches to the cabinet. Restores proper alignment and helps prevent rubbing or noise from a worn mount area. What it does:

• Provides a durable bearing surface where the tub mounts to the washer cabinet
• Helps keep the tub properly centered to reduce rubbing, vibration, and related noise
• Replaces worn or damaged sleeve surfaces that can cause tub movement or abrasion
• Commonly used when tub mounting points show visible wear or the tub shifts during cycles

• One tub-mount sleeve

• Turn off and unplug the appliance and shut off the water supply before beginning any repair
• Inspect surrounding mounts, seals, and fasteners; replace any additional damaged components as needed
• Use appropriate tools and follow OEM disassembly steps to access and press or slide the sleeve into place

The Inner Door Panel is an OEM part for GE dishwashers. It serves as the inner lining of the dishwasher door, ensuring a watertight seal and supporting components like the detergent dispenser and vent assembly.

Common causes of a bad inner door panel include wear and tear from regular use, exposure to high temperatures and harsh detergents, or physical impacts that cause cracks or warping.

Symptoms of a bad Inner Door Panel include:

• Water leaking from the door area during operation
• Difficulty in opening or closing the door properly
• Visible cracks, warping, or other damage to the panel
• Malfunctioning detergent dispenser or other door-mounted components

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This wash pump kit is the dishwasher's circulation pump assembly that pressurizes and recirculates water through the spray arms. Replacing a failing pump restores wash pressure, cleaning performance, and helps eliminate leaks or loud humming/grinding from the sump area.

• Recirculates wash water under pressure to drive the spray arms
• Maintains steady water flow through the wash system and filters
• Typical symptoms: poor cleaning or no spray, loud humming/rumbling or grinding, leaks at the pump area, or cycles that stall/stop
• Use when the circulation system is weak, seized, or noisy

• Disconnect power and shut off water supply before servicing; allow components to cool
• Bail out any standing water and place towels to catch residual water
• Pull the dishwasher to access the sump/pump area as required by your model; carefully disconnect hoses and wiring
• Ensure seals seat evenly and clamps are secure; run a short test cycle and check for leaks before final reinstallation

This user-cleanable fine filter sits in the bottom of the dishwasher and traps small food particles so the wash water stays cleaner. Replacing a damaged or clogged filter helps maintain spray pressure and consistent cleaning results.

• Screens fine debris from the recirculating wash water
• Helps prevent grit and food from redepositing on dishes and glassware
• Supports proper water flow to the spray system and pump
• When clogged or damaged, may cause poor cleaning, gritty residue, odors, or unusual pump noise

• Disconnect power before servicing the appliance
• Open the door and remove the lower rack; unlock and lift out the old fine filter per your model's instructions
• Rinse the area, install the new filter, and lock it securely so it sits flat
• The lower spray arm spins freely before running a test cycle

A coated fold-down tine for dishwasher racks that restores secure dish support and lets the rack fold down to accommodate larger cookware. The protective coating helps resist corrosion and reduces scratching of dishes. What it does:

• Replaces a broken or missing fold-down tine so dishes sit securely on the rack
• Folds down to create extra space for large pots, pans, or baking sheets
• Coated finish helps resist rust and prevents metal-to-dish contact
• Helps stop dishes from tipping or sliding when the original tine is damaged

• High-level replacement: typically snaps into the rack; inspect surrounding tines and rack clips for wear
• Always disconnect power to the appliance and empty the rack before servicing
• Handle the coated surface carefully to avoid chipping the finish; reinstall rack per manufacturer guidance
• If the rack or mounting hardware is damaged, replace those components to ensure a secure fit

This bottle blaster is a dishwasher spray nozzle that helps direct water into narrow or tall items for better rinsing and cleaning. It replaces a worn or broken nozzle to restore targeted spray performance. What it does:

• Directs pressurized wash water into bottles, thermoses and tall glassware for improved rinse coverage
• Helps reduce trapped food and residue in narrow openings by channeling spray where the regular spray arm may miss
• Commonly replaced when cracked, clogged, or when spray pattern is weak or uneven
• Works as a single-point spray fitting within the dishwasher wash system

• One bottle blaster spray nozzle

• Disconnect power and water supply before accessing dishwasher interior
• Remove the top rack or required access panels per your model to reach mounting area
• Inspect surrounding spray arm and seals; replace any damaged clips or O-rings as needed
• Reassemble components securely and run a short cycle to check for leaks and proper spray pattern

This vent conduit assembly routes exhaust from the dryer to the home vent, restoring proper airflow and helping the appliance vent safely. It replaces a damaged, crushed, or disconnected dryer vent channel to improve drying performance and reduce lint buildup. What it does:

• Channels dryer exhaust from the appliance to the wall vent
• Prevents restricted airflow caused by crushed or separated vent tubing
• Helps reduce long dry times and overheating symptoms
• Lowers risk of lint buildup and related odors near the dryer

• Disconnect power (and gas supply for gas dryers) before beginning service
• Verify correct alignment and secure with appropriate clamps or fasteners
• Inspect adjacent venting and clean lint from vent path while replacing

This coated frame wire assembly replaces a damaged or corroded structural wire used to support and retain internal components. The protective coating helps resist rust and reduces wear for reliable, long-lasting support. What it does:

• Provides structural support and shape for the appliance frame or internal assembly
• Secures or positions components that attach to the wire frame
• Protects against corrosion and wear with a durable coating
• Common symptom indications: visible bending, breakage, loose or rattling parts, or components no longer held in place

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools; handle carefully to avoid sharp edges and protect the coating.
• Replace only with the same part to ensure fit and function.

This tub-mount gasket seals and cushions the washer tub where it mounts to the cabinet, helping prevent leaks and reducing vibration for quieter operation. It restores a proper seal to keep water contained inside the washer tub. What it does

• Creates a water-tight seal at the tub mounting point to help stop leaks.
• Cushions the tub and reduces noise and vibration during spin cycles.
• Helps maintain proper alignment between the tub and cabinet.
• Use when you see water pooling near the base, leaks from the tub area, or increased vibration/noise.

• Disconnect power and water supply before starting any repair.
• Drain the washer and remove panels as required for access.
• Inspect the mounting surface for damage or debris; clean before installing the new gasket for a proper seal.
• After installation, run a short cycle to check for leaks and proper operation.

The Sump Overmold and Gasket Service Kit is an OEM part for GE dishwashers. Containing both the sump overmold and new gaskets, this kit replaces critical components in the lower dishwasher tub assembly.  

Causes of a bad sump or gaskets can include deterioration of rubber materials over multiple years of use and high heat. Mineral buildup during the wash cycle may also damage sealing surfaces.

Symptoms of a bad Sump Overmold and Gasket Service Kit include:

• Leaks or water entry in the bottom of the dishwasher 
• Excess moisture inside cabinet panels
• Inefficient or incomplete drying performance 

This genuine GE part is compatible with select Hotpoint, RCA and some Kenmore models as well.

This upper rack is the dishwasher basket that holds glasses, cups and small items on the top level so they wash reliably and stay organized. It restores proper loading and spacing for upper-rack dishes. What it does

• Replaces a cracked, bent or missing upper rack to secure cups, glasses and small bowls during wash cycles
• Restores proper spray coverage and drainage for upper-rack items so dishes come out cleaner
• Stops rubbing or scratching caused by damaged rack tines or supports
• Ensures proper alignment with the rack track and rollers for smooth in-and-out movement

• One upper rack

• Disconnect power and water to the dishwasher before starting work
• Remove lower rack and follow OEM instructions to unclip or slide out the damaged upper rack and install the replacement
• Check and transfer any rollers, end caps or tine inserts only if the OEM instructions show they are reusable; only items explicitly listed will ship
• Use care around sharp edges and test rack travel before running a full cycle