Gdtp180ed0ww Parts

The Detergent Module is an OEM part for GE dishwashers. This part dispenses detergent during the washing cycle. This module ensures the detergent is released at the appropriate time, optimizing cleaning performance.

Causes of a bad detergent module can include clogging from hardened detergent, mechanical damage to the dispenser door, or electronic malfunctions that prevent proper dispensing. 

Symptoms of a bad detergent module include:

• Detergent not dispensing during the wash cycle
• Poor cleaning results
• The dispenser door not opening or closing properly
• Visible damage or clogging in the module

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This silverware basket assembly sits in the lower rack to organize and secure flatware during the wash cycle, promoting thorough cleaning while keeping small items from slipping loose and potentially causing noise or damage.

• Holds and separates utensils in the lower rack for better spray coverage
• Replaces a cracked, warped, damaged, or missing basket
• Helps prevent utensils from falling through and obstructing moving parts
• Common signs it's needed: broken/missing sections, sharp edges, utensils not staying upright or falling out

• No tools required; pull out the lower rack to access the basket
• Lift out the old basket and place the new one in the same position
• Ensure the basket sits flat and does not interfere with the lower spray arm
• Let the dishwasher cool before handling near the lower rack or heater

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.

This silicone light pipe guides the dishwasher's status LED to the visible surface of the door/control area. Replacing a discolored, cracked, or missing light guide restores clear, consistent indicator visibility during cycles. What it does:

• Channels light from the internal indicator LED to the exterior viewing point
• Helps maintain bright, focused status illumination
• Replaces a yellowed, deformed, or missing light pipe
• Common symptoms: status light dim/faint, only visible at an angle, or not visible at all

• 1 silicone light pipe

• Disconnect power to the dishwasher before service
• Open the door and access the control/indicator area as outlined in your service information
• Match the orientation of the original piece and press the new light pipe fully into place
• Verify indicator operation before reassembling panels

This bracket handle is the replacement mounting bracket that secures a refrigerator or freezer door handle, restoring proper handle alignment and a secure grip. It helps keep the door handle firmly attached and functioning. What it does:

• Secures the door handle to the appliance door so the handle stays mounted and aligned
• Restores a loose, wobbly, or detached handle for reliable opening and closing
• Prevents further wear on handle fasteners by providing the proper mounting support
• Matches OEM fit and function for straightforward replacement

• One replacement bracket handle

• Basic hand tools typically required; handle hardware may need removal first
• Follow OEM instructions and use correct fasteners; replace any damaged screws or anchors
• Disconnect power to the appliance (or keep door open/unloaded) and work safely to avoid pinching or dropping the door

This adjustable toe kick provides a finished, removable grille at the base of the appliance and helps cover the cabinet gap while allowing proper airflow and access for service. Durable white finish matches many kitchen interiors. What it does:

• Covers the space between the floor and the appliance cabinet for a clean, finished look
• Adjusts height to accommodate uneven floors and different cabinet clearances
• Permits air circulation under the appliance to help prevent overheating
• Allows easy access to lower service areas and components when removed

• One adjustable toe kick panel in white

• Remove power supply or disconnect appliance per manufacturer safety instructions before working underneath
• Typically secures with clips or screws; keep fasteners and retainer clips for reinstallation
• Handle panel gently to avoid bending; ensure proper alignment before fastening

This outer door assembly replaces a damaged or worn exterior door panel and restores the appliance's appearance and proper door closure. The stainless steel finish provides a durable, corrosion-resistant surface that matches factory styling. What it does:

• Replaces the exterior door panel to restore correct door fit and finish
• Helps ensure the door closes securely and reduces gaps that can cause heat or air loss
• Stops visible damage such as dents, scratches, or warped edges from affecting operation
• Reduces rattling or vibration caused by a loose or bent outer door

• Disconnect power (and gas supply, if applicable) before starting any repair
• Handle edges and glass carefully to avoid cuts or breakage
• Basic hand tools are typically required; follow the OEM service manual for proper disassembly and reassembly

Note: Left side hinge

This door handle assembly replaces a broken or worn handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed to match the original part's fit and function. What it does

• Replaces a cracked, loose or broken door handle so the door opens and closes properly
• Provides a solid handhold for everyday use and prevents sharp edges from exposed damage
• Restores correct alignment and engagement with the door trim and latch area
• Helps eliminate rattling or wobble caused by a failing handle

• One complete door handle assembly

• Disconnect power to the appliance before starting any repair
• Remove exterior trim or access panels as required to reach mounting screws; retain hardware if in good condition
• Handle is secured with screws or clips—inspect fasteners and striker/latch for wear during install

This white door handle assembly replaces a broken, cracked or loose refrigerator door handle to restore a secure grip and clean appearance. Fits compatible GE refrigerators and installs in place of the original handle assembly. What it does:

• Provides a secure, ergonomic grip for opening and closing the refrigerator door
• Replaces broken, cracked or loose handles that affect door operation or appearance
• Restores proper handle alignment so the door opens smoothly
• Helps prevent further damage from using a compromised handle

• Remove food and any items from the door; support the door while working to avoid strain or damage
• Use common hand tools (screwdriver, socket) to remove mounting screws and transfer any trim or mounting hardware as needed
• Keep original screws and clips unless the new assembly explicitly includes replacements

This coated frame wire assembly replaces a damaged or corroded structural wire used to support and retain internal components. The protective coating helps resist rust and reduces wear for reliable, long-lasting support. What it does:

• Provides structural support and shape for the appliance frame or internal assembly
• Secures or positions components that attach to the wire frame
• Protects against corrosion and wear with a durable coating
• Common symptom indications: visible bending, breakage, loose or rattling parts, or components no longer held in place

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools; handle carefully to avoid sharp edges and protect the coating.
• Replace only with the same part to ensure fit and function.

This door foam block cushions and seals the appliance door, helping reduce vibration and prevent drafts or leaks where the door meets the cabinet. It replaces worn or damaged foam to restore a tight, even door fit and quieter operation. What it does:

• Replaces the foam block located on the appliance door to restore proper sealing and contact
• Helps reduce noise and vibration caused by door movement or uneven contact
• Minimizes air or water leakage at the door seal when original foam is compressed or degraded
• Simple, passive component—no electrical function

• Install by removing the door trim or access panel per your model's service instructions
• Ensure the mounting surface is clean and dry before placing the foam for best adhesion and fit
• Use basic hand tools; avoid forcing the foam into place to prevent tearing
• Disconnect power and follow manufacturer safety guidance before servicing the appliance

This replacement foam block cushions and seals the top control area to reduce vibration and help keep the control assembly securely positioned. It restores proper fit and helps prevent noises or rubbing from loose panels. What it does:

• Cushions the top control assembly to reduce vibration and rattle during operation
• Helps keep control housing and wiring harnesses stable and correctly positioned
• Provides a protective barrier to limit dust and light moisture intrusion around controls
• Addresses symptoms like buzzing/rattling noises or a loosely seated control panel

• Disconnect power to the appliance before starting any repair
• Access the top control area per your model's service instructions; remove trim or console as needed
• Remove old foam and adhesive residue; press replacement foam into correct position ensuring proper orientation