Ge Gss25qgta Parts

This cam closure is the small plastic latch that helps the freezer door align and stay closed, restoring a tight seal for efficient cooling and preventing frost buildup. Fits the freezer door hinge area and replaces worn or broken closures. What it does:

• Guides and secures the freezer door into the closed position for a reliable seal
• Replaces broken, cracked, or missing cam closures that let the door sag or catch
• Helps reduce air leaks that can cause frost buildup or higher energy use
• Works with the freezer hinge/cam assembly to maintain proper door alignment

• Disconnect power before working on the refrigerator to avoid electrical or injury risk.
• Remove the freezer door or inner liner panels as required to access the cam closure; follow the refrigerator model service manual.
• Install the cam in the correct orientation and ensure smooth door movement and alignment before reassembly.
• If hinges, screws, or adjacent parts are damaged, inspect/replace those parts as needed for a lasting repair.

This light socket connects the interior lamp to the refrigerator wiring so the interior light turns on when the door opens. It replaces a damaged or burned socket to restore reliable lighting. What it does:

• Holds the interior lamp securely and provides the electrical contact for operation
• Restores lighting when a damaged socket causes the light to fail or flicker
• Prevents intermittent connections from poor contacts or heat damage
• Works with the appliance's existing wiring and bulb style

• Disconnect power to the appliance before inspecting or replacing the socket.
• Handle bulbs and sockets carefully; use gloves to avoid cuts and for hygiene.
• Test operation after installation; replace the bulb if necessary.

This dispenser bucket cover is the replacement top for the refrigerator ice bin that helps contain and direct dispensed ice. Restores a proper seal and keeps ice protected for smooth dispensing and reduced spills. What it does:

• Replaces a cracked, warped or missing ice bin cover so the dispenser operates without obstruction
• Helps direct ice from the bin into the dispenser mechanism for consistent delivery
• Reduces ice spills and limits exposure of ice to odors and contaminants
• Supports proper alignment of the ice bin with the dispenser chute

• One dispenser bucket cover (1 piece)

• Always unplug or power off the refrigerator before removing the ice bin or replacing parts
• Remove the ice bin, position the cover, then align and secure per the unit's manufacturer instructions
• Inspect mating surfaces for debris or damaged tabs; replace any broken retainers before reinstalling

A stationary blades assembly that secures the stationary blade in place so the cutting or dispensing mechanism operates smoothly. Replacing a worn or broken assembly restores proper blade alignment and reduces noise or poor cutting performance. What it does:

• Holds the stationary blade securely to stabilize rotation and cutting action
• Maintains correct blade alignment to prevent wobble, jamming, or uneven cutting
• Helps reduce abnormal noise and vibration caused by a loose or damaged blade mount
• Restores reliable operation of the appliance's blade/dispensing mechanism when original part is worn or cracked

• One stationary blades assembly

• Disconnect power (or unplug) and turn off water supply if applicable before beginning repair
• Remove access panels or covers to reach the blade area; keep track of fasteners and trim
• Inspect mating parts (rotor, fasteners, seals) for wear and replace if damaged

This lower front trim piece attaches to the refrigerator base to cover and protect the grille area while keeping the appliance's front panel looking finished. It restores appearance and helps keep debris away from vents and components. What it does:

• Covers the lower front grille opening for a finished, OEM appearance
• Protects underlying vents and components from dust and accidental contact
• Helps direct airflow around the condenser/vent area for proper operation
• Replaces damaged, cracked, or missing trim to improve aesthetics

• One grille recess lower front trim

• Disconnect power to the refrigerator before attempting installation
• Typically secures with snap tabs and/or screws; align tabs and press or fasten as required
• Handle carefully to avoid scratching the finish and to prevent breakage of plastic tabs
• Obtain OEM replacements for secure installation

This support slide holds and guides a refrigerator or freezer basket so it opens and closes smoothly, preventing sagging and keeping stored items accessible. It restores proper basket movement and alignment for safer, more reliable use. What it does

• Replaces a worn or broken slide that supports the basket and allows it to glide.
• Restores smooth in-and-out motion so the basket doesn't stick or bind.
• Prevents the basket from tipping or sagging when loaded.
• Helps reduce noise and uneven movement caused by damaged slides.

• Disconnect power to the appliance before starting any repair.
• Remove the basket or drawer to access the slide assembly; reinstall the slide in the same orientation.
• Align the slide with the mounting points and secure until it snaps/locks into place; verify smooth operation before returning items to the basket.
• Replace it with the correct OEM fasteners only.

This support slide secures and guides a refrigerator freezer basket so it opens and closes smoothly and stays aligned. It replaces worn or broken slides to restore proper basket support and movement. What it does:

• Guides the basket along its track for smooth in-and-out motion
• Helps keep the basket level and prevents it from sagging or tilting
• Replaces damaged or worn slide hardware that can cause sticking or uneven travel
• Addresses symptoms like a basket that won't slide smoothly, drops, or misaligns

• One support slide

• Turn off power to the appliance and remove stored items from the basket before starting
• Compare the old slide to the new one to confirm orientation and mounting points
• Install by aligning the slide with the mounting points and securing per OEM fastener locations

This is a replacement shelf chiller for the refrigerator chiller compartment — a single shelf that restores proper storage space and helps keep chilled items organized and cooler. Fits into the designated chiller shelf supports. What it does

• Provides a stable surface for storing chilled items in the refrigerator chiller compartment
• Restores usable shelf space after a cracked, chipped, or missing chiller shelf
• Helps maintain proper airflow around stored items when installed correctly
• Reduces the risk of spills by replacing damaged shelving

• One shelf chiller

• Disconnect power to the appliance before removing or installing shelves to avoid injury
• Remove all items from the chiller area and carefully slide old shelf out along its supports
• Align shelf with the chiller shelf supports and gently set into place; ensure it is seated and level
• Handle with care to avoid chipping or cracking; wear gloves if glass or sharp edges are present

This bottom hinge and pin assembly secures and supports the lower refrigerator/freezer door, allowing smooth pivoting and proper alignment for reliable opening and closing. It replaces a worn or bent hinge to restore door stability. What it does:

• Provides a stable pivot point for the lower door to ensure correct alignment and smooth operation
• Helps prevent door sagging, rubbing, or misalignment that can cause poor sealing or uneven gaps
• Fits the lower hinge location and transfers door weight to the cabinet frame
• Works with existing hinge housing and mounting points to restore factory movement

• Turn off power to the appliance and remove all items from the door before starting
• Support the door securely while removing and installing the hinge to avoid injury or damage
• Use appropriate hand tools; tighten fasteners to secure but avoid over-torquing

This is a replacement front door shelf for the freezer door that restores secure storage for frozen items and helps keep the door organized. It fits into the door bin track and provides a stable shelf surface. What it does:

• Replaces a cracked, broken or missing freezer door shelf so items sit securely on the door
• Restores proper door bin retention and prevents items from falling during door use
• Helps eliminate rattling or loose movement caused by a damaged shelf
• Matches OEM shape and mounting locations for a direct fit when compatible

• One front door shelf (freezer)

• Remove all items from the door and power off the appliance before replacing the shelf
• Typically installs by snapping into the existing door bin track; align tabs and press into place
• Use care to avoid sharp edges on the door; if fasteners are present, retain and reuse as specified by the model

This replacement rack can restores a damaged or missing support cup that helps hold and stabilize a refrigerator rack. It lets shelves sit level so stored items stay secure and the rack moves smoothly. What it does

• Supports a refrigerator shelf or rack pivot so the rack stays level and aligned.
• Replaces cracked, split, or missing support cups that allow racks to tilt or drop.
• Reduces rattling, binding, or uneven sliding caused by a failed rack support.
• Restores proper engagement with rack tracks or pivots for safe storage.

• One rack can (support cup) as pictured.

• Disconnect power (unplug or shut off breaker) before working inside the appliance.
• Remove the affected rack or shelf to access the support cup; installation typically snaps or presses into the rack/frame.
• Inspect mating surfaces for debris or damage; clean before installing the new cup for a secure fit.

This replacement cover hinge secures and supports the appliance access cover, restoring proper alignment and smooth opening/closing. It's a direct-fit part that helps stop sagging or loose covers and reduces rattling during operation. What it does:

• Replaces a worn or broken cover hinge to restore proper cover alignment and operation
• Helps stop cover sagging, uneven gaps, or covers that won't stay closed
• Reduces rattling or vibration caused by a loose hinge
• Matches white trim for a clean, factory appearance

• High-level fit: installs at the cover mounting point using the factory screws or clips
• Safety first: disconnect power to the appliance before beginning any repair
• Handle trim pieces carefully to avoid scratching or cracking during removal/installation

This handle cap is the replacement end cap that finishes and secures a refrigerator door handle, restoring a clean, finished look and helping keep the handle seated. Durable molded finish matches the original part. What it does

• Covers and secures the exposed end of a door handle for a finished appearance
• Helps keep the handle properly seated and aligned during normal use
• Replaces cracked, chipped, or missing end caps that affect appearance and fit
• Restores a clean seal against dirt and moisture at the handle end

• High-level, no-specialty tool install: typically snaps or screws into the handle end; inspect fasteners before reassembly
• Work with the door open and supported; avoid pinching fingers when seating the cap
• If access to electrical components is required during disassembly, unplug the appliance or disconnect power before starting
• Do not force parts; verify correct orientation and seating to prevent damage

This bottom door hinge secures the refrigerator/freezer door at the lower pivot and helps ensure smooth, stable opening and closing. Durable replacement that restores proper door alignment and keeps the seal functioning. What it does:

• Supports the bottom of the door and serves as the lower pivot point
• Keeps the door aligned so it closes fully and maintains a proper seal
• Reduces door sag, rubbing, or uneven gaps that cause cooling issues
• Fits and functions as the factory replacement hinge for compatible GE units

• Disconnect power to the appliance before beginning any repair
• Support the door while removing and installing the hinge to prevent injury or damage
• Use appropriate hand tools; avoid overtightening fasteners which can misalign the door